Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Infiltrating the zebrafish swarm: design,implementation and experimental tests of a miniature robotic fish lure for fish–robot interaction studies

Robotic fish are nowadays developed for various types of research, such as bio-inspiredrobotics, biomimetics and animal behavior studies. In the context of our research on the social interactions of the zebrafish Danio Rerio, we developed a miniature robotic fish lure for direct underwater interaction with the living fish. This remotely controlled and waterproof device has a total length of 7.5 cm with the same size ratio as zebrafish and is able to beat its tail with different frequencies and amplitudes, while following the group of living animals using a mobile robot moving outside water that is coupled with the robotic lure using magnets. The robotic lure is also equipped with a rechargeable battery and can be used autonomously underwater for experiments of up to 1 h. We performed experiments with the robot moving inside an aquarium with living fish to analyze its impact on the zebrafish behavior. We found that the beating rate of the tail increased the attractiveness of the lure among the zebrafish shoal. We also demonstrated that the lure could influence a collective decision of the zebrafish shoal, the swimming direction, when moving with a constant linear speed inside a circular corridor. This new robotic fish design and the experimental results are promising for the field of fish–robot interaction.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Fourier-transform speckle profilometry: three-dimensional shape measurements of diffuse objects with large height steps and/or spatially isolated surfaces

An interferometric technique for automated profilometry of diffuse objects has been proposed. It is based on the Fourier-fringe analysis of spatiotemporal specklegrams produced by a wavelength-shift interferometer with a laser diode as a frequency-tunable light source. Unlike conventional moiré techniques the proposed technique permits the objects to have discontinuous height steps and/or surfaces spatially isolated from one another. Experimental results are presented that demonstrate the validity of the principle.     

Conductivity of the one-dimensional quantum sine-gordon system (g 2 = 4π) with impurities

We have considered the behavior of the conductivity or the dielectric function of the one-dimensional (1-D) quantum sine-Gordon system (g² = 4) for two models of impurities. We have used a Fermi-Bose relation and a self consistent t-matrix approximation. As for the conductivity at zero temperature, it appears when the concentration of impurities becomes larger than the critical concentration of impurities. It shows the linear increase near the critical concentration. As for the dielectric constant, its behavior is model dependent. We have numerically calculated the frequency dependence of the conductivity at zero temperature. The real part shows the second order increase near the critical frequency. The imaginary part shows the linear decrease from the origin.     

Interpretation of reflection and transmission spectra for thin films: transmission

The optical behavior of a thin film, that is, peak positions and intensities, is discussed for transmission under a thin-film approximation. The infrared transmission spectra of thin films, both standing films and those on dielectric substrates, are simulated for s and p polarization at various angles of incidence. For spectral simulation, the matrix method is used in conjunction with noise-free complex refractive indices based on the dispersion theory. The peak positions in the simulated spectra are compared with transverse optic and longitudinal optic frequencies based on the macroscopic theory. The simulated peak intensities for the standing films are compared with the prediction based on the thin-film approximation. Furthermore, it is found from the spectral simulation for thin films on dielectric substrates that the peak intensity for a thin film may depend on the thickness and refractive index of the substrate.     

Observation of enhanced backscattering from a plane mirror viewed through polymer-film-dispersed liquid crystals

We report experimental results on enhanced backscattering from a plane mirror that is viewed through polymer-film-dispersed nematic liquid crystals. The distribution of the averaged intensity of the light reflected from the mirror placed behind the polymer film is investigated with an image-processing system when a Gaussian beam wave is incident. The enhanced light peak is observed in an incident beam direction, the result of which is predicted by a theory based on the circular Gaussian statistic random-phase-screen model. We pay attention to the enhancement dependence on parameters such as the distance between the polymer film and the flat mirror. The observed result is similar to a previous study by Jakeman et al. in which a random diffusive glass plate was used as a random-phase screen [J. Phys. D 21, 32 (1988)].     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.