An experimental study on moisture transport through a porous plate with micro pores

An experiment was carried out to examine heat and mass transfer between constant-temperature water and dry air through a porous plate having extremely small pores. The effects of the thermal conductivity in the porous plate on moisture transport were investigated. The controlling factor for moisture transport was found to be the thermal resistance inside the porous plate having a low-thermal-conductivity and the heat transfer at the surface of the porous plate having a high-thermal-conductivity.     

Dielectric properties of woven fabric glass fiber reinforced polymer-matrix composites in the THz frequency range

Electromagnetic wave transmittances of plain woven fabric glass fiber reinforced epoxy matrix composite (PW-GFRP) and eight-harness-stain fabric glass fiber reinforced polyimide matrix composite (8H-GFRP) with 1.0 mm thickness were measured in a terahertz (THz) frequency range. The transmittance values for both composites are nearly zero at a frequency of 1.0 THz. The real parts of the complex dielectric constant, ε′(ω) are 4.45 and 3.87 for PW-GFRP and 8H-GFRP, respectively, in the frequency range from 0.2 to 1.0 THz, and they are almost frequency independent. Conversely, the imaginary parts of the dielectric constant, ε′′(ω) for both composites linearly increases with increase of the frequency from 0.13 to 0.37 for PW-GFRP, and from 0.12 to 0.33 for 8H-GFRP.     

Structural analysis and transistor properties of hetero-molecular bilayers

We examined the film morphologies and transistor properties of hetero-molecular bilayer consisting of N, N’-dioctyl-3, 4, 9, 10-perylenedicarboximide (PTCDI-C₈) and quaterrylene. First, the structure and carrier conduction of PTCDI-C₈ films were studied, followed by an analysis of the carrier accumulation process in a PTCDI-C₈/quaterrylene hetero-bilayer transistor. Based on the displacement current measurement (DCM), we stress the potential of the hetero-bilayer for tuning carrier accumulation like carrier doping techniques in field-effect transistors.     

Mesophase structure discovered through in-situ X-ray measurement in drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) fiber

The structure development in the continuous laser-heated drawing process of poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) fiber was analyzed by in-situ X-ray diffraction measurement. Because of the rapid and uniform laser heating, and the resultant steady-state nature of the necking-drawing, the structure development after the on-set of necking could be measured in the time resolution of several hundred microseconds. We found for the first time the temporal appearance of meridional (001′) diffraction at several milliseconds after the on-set of necking indicating that the mesophase structure similar to the one reported for poly(ethylene terephthalate) was also formed in the initial stage of fiber structure development of PEN. The d-spacing of the (001′) diffraction 1.230 ± 0.003 nm was shorter than the c-axis lengths of both α and β crystals.     

Transmission line tower models in frequency domain

This paper proposes a transmission line tower model in frequency domain for back-flashover analysis, which has a uniform characteristic impedance and a uniform propagation constant. Most conventional tower models are constructed as a constant and uniform parameter transmission line that is independent of frequency. However, the authors' models have the frequency dependency of the characteristic impedance and the propagation constant to express the frequency characteristic of the transmission line tower. Two models, a cylinder model and a four-frames model, were investigated to simulate the tower. Their surge responses were computed by numerical electromagnetic field analysis based on the moment method. From the results, the two-port circuit constants were calculated in the frequency domain, and the characteristic impedance and the propagation constant are derived from them. The complex artificial oscillations appeared in frequency dependency of the parameters because the parameters were calculated numerically. The equations with analytical form were obtained by approximating with a smooth curve to the oscillations. It is possible for the equations to represent the transmission line constants as a function of geometrical parameters such as the tower height and the radius. Close agreement was found between the surge response computed by the numerical electromagnetic field analysis and the result calculated by inverse Laplace transformation of the analytical equations. To prove the model, the experimental results were compared with the computed ones of the cylinder model that has arms, and it was shown that the new model agrees closer with the experiment than conventional transmission line models.     

Clinical and molecular genetic study in seven Japanese families with spinocerebellar ataxia type 6

This study examined the effect of thyrotrophin-releasing hormone (TRH) administration on thermoregulation in the newborn. Twin lambs were either delivered near-term by caesarean section or born vaginally at term. Colonic temperature, O2 consumption, CO2 production, breathing and heart rates, plus plasma thyroid hormone and nonesterified fatty acid (NEFA) concentrations and thermogenic activity (i.e. GDP binding) of brown adipose tissue (BAT) were measured. In caesarean section delivered lambs colonic temperature decreased rapidly after birth, a response that was greater in the group designated for TRH treatment, in which colonic temperature fell to below 36.0 degrees C at 80 min of life, prior to TRH administration. At this age colonic temperature had been restored to a mean of 38.70 degrees C in controls. TRH had no influence on the composition or thermogenic activity of BAT. The incidence of shivering was not influenced by TRH, but treated lambs maintained a higher rate of O2 consumption and ventilation compared with controls after colonic temperature had been restored to 38.56 degrees C. TRH appeared to promote fat oxidation as O2 consumption remained unchanged and CO2 production declined by a greater rate in treated lambs, resulting in a lower respiratory quotient compared to controls. Heart rate and plasma concentrations of NEFA increased following TRH administration although this did not result in values greater than controls. Normothermic lambs born vaginally had BAT with a greater thermogenic activity, higher plasma thyroid hormone and NEFA concentrations compared with caesarean section delivered lambs, but a thermogenic response was not observed to TRH despite a rise in thyroid hormone concentrations. In conclusion, TRH can improve thermoregulation, an effect that could be linked to an increase in fat oxidation.     

Slow crystallization process from amorphous PbTiO3

The effect of isothermal annealing of amorphous PbTiO₃ at a temperature below the crystallization temperature, T_crys, has been investigated. Time dependent dielectric constant in the annealing process has been observed. From the experimental results, both the existence of the glass transition temperature, T_g, and the steadiness of dielectric constant at room temperature have been established.     

Solubility and diffusivity of oxygen in aqueous sucrose solutions

Solubility and diffusivity of oxygen in aqueous sucrose solutions of various concentrations were measured at temperatures from 15° to 45°C and at atmospheric pressure. The solubility of oxygen could be correlated well by the method of van Krevelen and Hoftijzer. The diffusivity of oxygen was found to be proportional to the ?2/3 power of the viscosity of the solution.     

Studies on dry spinning. I. Fundamental equations

One difficulty in analyzing the state of filament in the dry spinning process is that in the boundary conditions required to solve the equations of mass, momentum and energy which are derived on the consideration of balance with respect to infinitesimally small element are not given a priori. The equations which include these boundary conditions in themselves are derived by considering mass, momentum, and energy balances with respect to the entire cross section of filament. These additional macroscopic equations are simplified to a great extent by assuming the flat velocity profile through the cross section of filament. Besides, in the steady state, these macroscopic equations are modified to give the equations of average solvent content, spinning tension, cross-sectional area, and average temperature. When the spinning conditions are given and the physical constants are measured for a given polymer and solvent system, it becomes possible to calculate the state of filament by solving these microscopic and macroscopic equations simultaneously without resorting to actual spinning.