Shared protection/restoration is a promising solution for reducing protection resources and is supported at each layer of the current multi-layer networks. Software-defined networking is expected to reduce equipment cost as well as operational cost by orchestrating these shared protection functionalities. However, although protection resource sharing improves link utilization, it sometimes increases the required equipment. Meanwhile, traffic re-aggregation at each layer is an important technique for low volume traffic to utilize the underlying link capacity more efficiently, but re-aggregation also makes it difficult to share protection resources with traffic at lower layers. In this paper, we present multi-layer network design strategy and method that reduce equipment cost by means of both traffic re-aggregation at each layer and protection resource sharing among multiple service traffic at different layers. The strategy first prioritizes traffic re-aggregation at each layer, and then maximally delegates shared protection to lower layers as long as it does not increase the required capacity at the lower layer. Evaluation results from the example three-layer networks confirm that the proposed method can effectively reduce equipment cost compared to the conventional design method. Cost reduction is achieved by leveraging shared protection functions at multiple layers. 相似文献
Abstract— A high‐pixel‐rate, high‐contrast (30,000:1) wide‐color‐gamut grating‐light‐valve laser projector is reported. A new optical engine enabling high‐frame‐rate (240 Hz) scan projection is employed. Panoramic wide‐angle‐scan projection with a 64:9 aspect ratio was also developed. Speckle noise is eliminated using a simple but highly efficient technique. The optical throughput efficiency of the grating‐light‐valve laser projector is reviewed. 相似文献
A tripod parallel mechanism consists of three links of fixed length and a rigid platform, and these are connected by revolute
joints. The platform can achieve sixdegrees-of-freedom (6-DOF) motion by the coordinated movement of the bottom ends of the
three links on a horizontal plane. This mechanism has advantages over the more common six extendible parallel manipulators.
It has a much larger work space and a simple structure. In this article, we show that the vector analysis for this tripod
parallel mechanism and the derivation of the positions of the three bottom ends of the links in an arbitrary attitude of platform
can be found by inverse kinematics and the conditions of geometrical constraint. Then, by a numerical simulation, the trajectories
of the bottom ends of the three links are shown. 相似文献
Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data.
The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.
In this paper, we propose a robust and accurate background model, called grayscale arranging pairs (GAP). The model is based on the statistical reach feature (SRF), which is defined as a set of statistical pair-wise features. Using the GAP model, moving objects are successfully detected under a variety of complex environmental conditions. The main concept of the proposed method is the use of multiple point pairs that exhibit a stable statistical intensity relationship as a background model. The intensity difference between pixels of the pair is much more stable than the intensity of a single pixel, especially in varying environments. Our proposed method focuses more on the history of global spatial correlations between pixels than on the history of any given pixel or local spatial correlations. Furthermore, we clarify how to reduce the GAP modeling time and present experimental results comparing GAP with existing object detection methods, demonstrating that superior object detection with higher precision and recall rates is achieved by GAP. 相似文献
An objects detection algorithm for color dynamic images from two cameras is proposed for a surveillance system under low illumination. It provides automatic calculation of a fuzzy corresponding map and color similarity for lower luminance conditions, which detects little chromatic regions in CCD camera images under lower illumination and presents regions with a possibility of occlusion situation. Experimental detection results for two dynamic images from real surveillance cameras in a downtown area in Japan under low luminance conditions show that the proposed algorithm has 15% improved accuracy compared with the independent detection algorithm in the same false alarm rate, which occlusion regions are correctly presented. Moreover, implementability for severe surveillance situation is discussed. The proposed algorithm is being considered for use in a low cost surveillance system at a relatively poor security downtown (shopping mall) area in Japan. 相似文献
Nuclear spin-lattice relaxation properties of hcp solid 3He with 4He impurities have been studied. At temperatures below the exchange plateau region, three kinds of relaxation time were observed. To analyze the data, a phenomenological four-bath model was developed, the four baths being the Zeeman bath, the phonon bath, an X-bath, and a Y-bath. The X-bath consists of the exchange bath and a part of the 4He-4He elastic interaction bath. The Y-bath is the main part of the elastic interaction bath. We measured the concentration dependence of the energy constants of all the baths, as well as the temperature and concentration dependences of the three kinds of relaxation time. The relaxation behavior corresponding to the process between the X-bath and the Y-bath could not be expressed by a single exponential function of time and the relaxation rate was strongly dependent on the concentration. This process may be related to the internal thermal equilibrium process within the elastic interaction bath. The impurity-dependent relaxation time between the X-bath and the phonon bath had a temperature dependence of T–n with n = 7.4±0.3. 相似文献
Eight subjects participated in a subjective experiment of eight conditions to investigate the effects of heated seats in vehicles on skin temperature, thermal sensation and thermal comfort during the initial warm-up period. The experimental conditions were designed as a combination of air temperature in the test room (5, 10, 15, or 20 °C) and heated seat (on/off). The heated seat was effective for improving thermal comfort during the initial warm-up period when air temperature was lower than 15 °C. Use of heated seats prevented decreases in or increased toe skin temperature. Heated seats also increased foot thermal sensation at 15 and 20 °C. Optimal thermal sensation in contact with the seat was higher when air temperature was lower. Optimal skin temperature in contact with the seat back was higher than that with the seat cushion. Moreover, these optimal skin temperatures were higher when air temperature was lower. 相似文献
We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films. 相似文献
To create a character animation, a 3D character model is often needed. However, since humanlike characters are not rigid bodies, to deform the character model to fit each animation frame is tedious work. Therefore, we propose an easy-to-use method for creating a set of consistent 3D character models from some hand-drawn sketches while keeping the projected silhouettes and features of the created models consistent with the input sketches. Since the character models possess vertexwise correspondences, they can be used for frame-consistent texture mapping or for making character animations. In our system, the user only needs to annotate the correspondence of the features among the input-vector-based sketches; the remaining processes are all performed automatically. 相似文献