Selective adsorption of organic sulfur in coal extract by using metal-loaded carbon

The objective of this study was to develop an efficient cleaning process for hydrocarbon resources. We investigated the removal of organic sulfur from coal extract by using metal-loaded carbons. Tetralin and tetralin/phenol mixture were used for thermal extraction of Illinois No. 6 coal at 375 °C with a holding time of 1 h, and we examined the effects of temperature on product yield and sulfur-removal behavior using metal-loaded carbons. A decrease in the n-hexane insoluble fraction was observed at a temperature range from 200 °C to 250 °C in the extracts of tetralin and tetralin/phenol mixture. The organic sulfur content in the n-hexane insoluble fraction drastically decreased with increasing temperature. The organic sulfur in the n-hexane insoluble fraction was reduced above 200 °C, while the sulfur content reached 30-35% at 375 °C for both tetralin and tetralin/phenol mixture extracts. We investigated the effect of holding time on the extent of the coal extract desulfurization using Ni-loaded carbon. The sulfur content in the coal extract decreased as the holding time increased. The rate of coal extract desulfurization using tetralin/phenol was slower than that obtained using tetralin. The coal extract obtained using the tetralin/phenol mixture contained a heavier polar fraction, which may have impeded the adsorption. All organic sulfur in the coal extract could be successfully removed Ni-loaded carbon at a treatment temperature of 350 °C and a holding time of 8 h. No appreciable changes were observed in the content of carbon, hydrogen, or nitrogen at any temperature or holding time in the ultimate analysis of the n-hexane insoluble fraction treated with Ni-loaded carbon. The results demonstrated that Ni-loaded carbon was much effective in removing organic sulfurs from the coal extract.     

High-efficiency Cu(In,Ga)Se2 thin-film solar cells with a novel In(OH)3:Zn buffer layer

We propose the inclusion of a novel In(OH)₃:Zn²⁺ buffer layer for fabricating high-efficiency CIGS solar cells. This buffer layer was deposited using a solution consisting of ZnCl₂, InCl₃·4H₂O, and thiourea. The In(OH)₃:Zn²⁺ films showed high resistivities of 2.1×10⁸ Ω cm and transmittance of above 95% in the visible range. We expected two effects due to this new buffer layer: first is the formation of a passivation layer on the CIGS surface and the second is Zn-doping into CIGS layer, resulting in the formation of a buried junction. A cell efficiency of 14.0% (V_oc: 0.575 V, J_sc: 32.1 mA/cm², FF: 0.758) was achieved by using an In(OH)₃:Zn²⁺ buffer layer, without the light soaking effect.     

Full-field optical coherence tomography by achromatic phase shifting with a rotating polarizer

We demonstrate two-dimensional detection optical coherence tomography (OCT) using achromatic phase shifting with a rotating polarizer. This phase shifting, which experiences a light beam with a cyclic change in its polarization state, is, in principle, independent of wavelength. We simulated the wavelength dependence of an achromatic phase shifter using Jones calculus and found that the achromatic region exceeded 145 nm when the deviation of the phase retardation was less than +/- 0.5 degrees. Using the achromatic phase shifter and a conventional phase-shift calculation method, we obtained en face OCT images of an onion at different depths. This method is effective to enhance the quality of OCT with an ultrabroad-spectrum light source.     

Fundamental characteristics of a synthesized light source for optical coherence tomography

We describe the fundamental characteristics of a synthesized light source (SLS) consisting of two low-coherence light sources to enhance the spatial resolution for optical coherence tomography (OCT). The axial resolution of OCT is given by half the coherence length of the light source. We fabricated a SLS with a coherence length of 2.3 microm and a side-lobe intensity of 45% with an intensity ratio of LED1:LED2 = 1:0.5 by combining two light sources, LED1, with a central wavelength of 691 nm and a spectral bandwidth of 99 nm, and LED2, with a central wavelength of 882 nm and a spectral bandwidth of 76 nm. The coherence length of 2.3 microm was 56% of the shorter coherence length in the two LEDs, which indicates that the axial resolution is 1.2 microm. The lateral resolution was measured at less than 4.4 microm by use of the phase-shift method and with a test pattern as a sample. The measured rough surfaces of a coin are illustrated and discussed.     

Evaluation of the Anti-Proliferative Activity of Rare Aldohexoses against MOLT-4F and DU-145 Human Cancer Cell Line and Structure-Activity Relationship of D-Idose

D-Allose (D-All), a C-3 epimer of D-glucose (D-Glc), is a naturally rare monosaccharide, which shows anti-proliferative activity against several human cancer cell lines. Unlike conventional anticancer drugs, D-All targets glucose metabolism and is non-toxic to normal cells. Therefore, it has attracted attention as a unique “seed” compound for anticancer agents. However, the anti-proliferative activities of the other rare aldohexoses have not been examined yet. In this study, we evaluated the anti-proliferative activity of rare aldohexoses against human leukemia MOLT-4F and human prostate cancer DU-145 cell lines. We found that D-All and D-idose (D-Ido) at 5 mM inhibited cell proliferation of MOLT-4F cells by 46 % and 60 %, respectively. On the other hand, the rare aldohexoses at 5 mM did not show specific anti-proliferative activity against DU-145 cells. To explore the structure–activity relationship of D-Ido, we evaluated the anti-proliferative activity of D-sorbose (D-Sor), 6-deoxy-D-Ido, and L-xylose (L-Xyl) against MOLT-4F cells and found that D-Sor, 6-deoxy-D-Ido, and L-Xyl showed no inhibitory activity at 5 mM, suggesting that the aldose structure and the C-6 hydroxy group of D-Ido are important for its activity. Cellular glucose uptake assay and western blotting analysis of thioredoxin-interacting protein (TXNIP) expression suggested that the anti-proliferative activity of D-Ido is induced by inhibition of glucose uptake via TXNIP-independent pathway.     

Simulation of rubber isostatic pressing and shape optimization of rubber mold

An elastic–plastic FEM is developed to study the fundamental features of rubber isostatic pressing of powder with a view to performing a net-shape process. Experiments are also performed. It is thus shown that the properties of the rubber, in particular Poisson's ratio, give a great influence on the shape of compact and density distribution. The thickness of the rubber mold is also influential; the thicker the mold, the closer is the shape of compact to the cavity shape. An optimization scheme is also developed, so that one is able to determine the cavity shape that gives a desired shape of compact.     

Motion of Crystal Particles by the Electromagnetic Vibrations in Mg-Cu-Y Bulk Metallic Glasses

The method for producing Mg-Cu-Y and Fe-Co-B-Si-Nb bulk metallic glasses using electromagnetic vibrations is effective in forming the metallic glass phase. Disappearance or decrement of clusters by the electromagnetic vibrations applied to the liquid state is considered to cause suppression of crystal nucleation, because the electromagnetic vibrations vibrate the clusters vigorously in the melt. The purpose of this study was to investigate motion of the crystal particles by the electromagnetic vibrations in Mg-Cu-Y bulk metallic glasses. The electromagnetic vibration force vibrated the crystal particles or the clusters that become crystal nuclei in the melt, because the electric current for the electromagnetic vibrations concentrates in those. Thus, the electromagnetic vibrations were found to select vibration particles from the melt. Moreover, it was considered that composites for which second phases or other compounds are dispersed into the metallic glass phase or a nanostructure phase can be produced by the electromagnetic vibration process. This article is based on a presentation given in the symposium entitled “Bulk Metallic Glasses IV,” which occurred February 25–March 1, 2007 during the TMS Annual Meeting in Orlando, Florida under the auspices of the TMS/ASM Mechanical Behavior of Materials Committee.     

Detection of CpG Methylation in G-Quadruplex Forming Sequences Using G-Quadruplex Ligands

Genomic DNA methylation is involved in many diseases and is expected to be a specific biomarker for even the pre-symptomatic diagnosis of many diseases. Thus, a rapid and inexpensive detection method is required for disease diagnosis. We have previously reported that cytosine methylation in G-quadruplex (G4)-forming oligonucleotides develops different G4 topologies. In this study, we developed a method for detecting CpG methylation in G4-forming oligonucleotides based on the structural differences between methylated and unmethylated G4 DNAs. The differences in G4 topologies due to CpG methylation can be discriminated by G4 ligands. We performed a binding assay between methylated or unmethylated G4 DNAs and G4 ligands. The binding abilities of fluorescent G4 ligands to BCL-2, HRAS1, HRAS2, VEGF G4-forming sequences were examined by fluorescence-based microtiter plate assay. The differences in fluorescence intensities between methylated and unmethylated G4 DNAs were statistically significant. In addition to fluorescence detection, the binding of G4 ligand to DNA was detected by chemiluminescence. A significant difference was also detected in chemiluminescence intensity between methylated and unmethylated DNA. This is the first study on the detection of CpG methylation in G4 structures, focusing on structural changes using G4 ligands.     

Evaluation of corrosion behaviors for reactor pressure vessels/primary containment vessels in Fukushima Daiichi units 1–3 nuclear power plant

Fukushima Daiichi nuclear power plants (1F) were damaged by unprecedented severe accident in the Great East Japan Earthquake on 11 March 2011, and seawater has been injected as an emergency countermeasure for the core cooling. Although, the RPV and PCV were not supposed to be exposed to diluted seawater, they have been exposed to diluted seawater environment or high-moisture environment. Therefore, seawater corrosion has become an important issue. Immersion corrosion tests were performed for low-alloy steel of RPV material and carbon steel of PCV material in 1F cooling-water-simulated environment. As a result, the mass loss by corrosion was reduced with the decreasing temperature and chloride ion concentration. Moreover, the effects of nitrogen deaeration and Na₂WO₄ addition on corrosion protection were remarkable among the selected corrosion countermeasures. In addition, the integrity assessments of RPV and PCV were performed considering the reduction of plate thickness based on corrosion test data and the load condition based on earthquake response analysis results. It had been confirmed that primary stresses for RPV and PCV equipment satisfied with the allowable values until at least 15 years after the accident.     

Thermal and mechanical properties of a poly(ϵ‐caprolactone)/graphite oxide composite

The effect of graphite oxide (GO) as the enforcing filler on the properties of poly(?‐caprolactone) (PCL) was investigated in this study. Through the introduction of GO, the Young's modulus of PCL was increased from 340 to 1000 MPa, and the tensile strength of PCL was increased from 15 to 26 MPa. Furthermore, the interlayer distance of GO (0.6 nm) was found to expand to 1.1 nm in the PCL/GO composite, which indicated the intercalation of the PCL chain into the GO layers. Because of this intercalation structure of the PCL/GO composite, GO showed a higher reinforcing effect than graphite on the mechanical properties of PCL. The intercalation should have enabled much effective load transfer in the PCL/GO composites. Moreover, GO showed a nucleating effect toward the crystallization of PCL, as the nonisothermal crystallization peak temperature shifted from 25°C for pure PCL to about 34°C for the PCL/GO composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008