沉积物源的综合识别与岩性圈闭的确定——以柴达木盆地七个泉地区为例

 柴达木盆地西部南区的阿尔金山前带是寻找岩性地层油气藏的有利地区。但该区沉积物源多、砂层薄，仅用常规的、单一的方法难以取得岩性地层油气藏勘探的效果。本文通过建立层序地层格架确定寻找岩性油气藏的主要目的层段，应用重矿物组分、测井响应、波阻抗反演等多种方法进行沉积物源和岩性圈闭的综合识别，在柴达木盆地西部南区七个泉构造斜坡带上确定一个地层岩性圈闭，已获得钻探的证实。     

锚注支护技术在修复巷道中的应用

新庄孜煤矿在总结各类支护型式优缺点的基础上 ,大力推广应用锚注支护技术 ,先后在修复高应力软岩冒落架棚巷道、修复砌碹巷道、修复大断面峒室等施工中灵活使用锚注支护技术 ,均取得良好的支护效果和显著的技术经济效益     

大变量逻辑函数最佳覆盖问题研究

逻辑函数的最佳覆盖，一直是逻辑综合领域的关键环节。尤其是大变量逻辑函数最佳覆盖，对复杂的逻辑综合更为重要，但也更加困难。本文在对逻辑覆盖算法研究的基础上，提出了适合大变量逻辑函数最佳覆盖的Beister改进算法。经过大量算题的测试表明，改进的列覆盖算法在时间复杂度和选择效果方面均优于Beister算法。     

μC/OS-Ⅱ在ADSP-BF531上的移植

介绍源代码公开的实时操作系统μC/OS-Ⅱ的特点、内核结构及ADSP-BF531的硬件特征,同时给出将μC/OS-Ⅱ移植到ADSP-BF531型数字信号处理器上的详细步骤和关键代码.     

硫化矿石氧化性的实验室综合评判

探讨了一种硫化矿石氧化性综合评判的新方法 ,并将该方法应用于矿山实际 ,得到了准确的评判结果。该项成果对于硫化矿石自燃防治理论与技术的研究具有很高的参考价值。     

硫在铅熔炼过程中的行为分析

介绍了铅烧结焙烧-鼓风炉还原熔炼过程中硫的分布及存在形态，着重分析了混合料含硫量与结块率的关系，得出了混合料含硫的临界值。论述了烧结块中残留的硫离子及硫酸根离子对铅熔炼生产的影响。针对硫的不同存在形态，提出了有效的解决办法和改进措施。     

Resource management in the next-generation DS-CDMA cellular networks

Direct sequence code-division multiple access has been shown as the predominant access technology to provide high-speed multimedia services in next-generation wireless cellular networks. The DS-CDMA cellular network significantly differentiates itself from the traditional narrowband TDMA/FDMA system, in which great capacity gain can be explored by taking advantage of its unique characteristics. This article addresses resource management in DS-CDMA cellular networks. We first provide an overview of the DS-CDMA network and discuss the main challenges in the design of resource management schemes. We then examine several critical issues within the scope of resource management, including congestion control, rate and power control, and cell planning, with the emphasis on call admission control. Finally, we offer some insights and discussions on the performance aspects, strengths, and weaknesses of existing proposals.     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

重油催化装置试运转技术分析

中石油宁夏大元炼油化工有限责任公司2套60万 t/aRFCCU,采用逆流两段再生新工艺,对投料试生产期间出现的问题进行技术分析,同时对装置操作特点等进行总结分析     

阳离子交换树脂铁中毒的复苏研究

软化器中使用的阳离子交换树脂容易受到铁离子的污染。采用均匀设计的方法,利用回归分析和最优化技术,研究了复苏剂中各组分对阳离子复苏效果的影响,得出了最佳复苏配方,开发出了一种新的复苏方法。这种方法具有腐蚀性低和复苏效果良好的特点,为生产现场树脂的复苏提供了有益的借鉴。