Magnetic field effects on g-jitter induced flow and solute transport

Numerical modeling and analyses are presented of magnetic damping of g-jitter driven fluid flow and its effect on the solutal striation in a simplified Bridgman-Stockbarger crystal growth system under microgravity. The model development is based on the finite element solution of the momentum, energy and solute transport equations under g-jitter conditions in the presence of an external magnetic field. The numerical model is verified by comparison with analytical solutions obtained for a simple parallel plate channel flow driven by g-jitter in a transverse magnetic field. Simulations are carried out to study the behavior of convective flow and solutal transport induced by the combined g-jitter and magnetohydrodynamic forces. Both the idealized single frequency g-jitter force and the real g-jitter perturbation taken during space flight are considered. Results indicate that an applied magnetic field can effectively damp the velocity caused by g-jitter and help to reduce the time variation of solute redistribution. A stronger applied field is more effective in suppressing the convective flows and hence reducing concentration variation. It is found that g-jitter driven flows have the same oscillation period as the driving force with or without the applied field. However, an applied magnetic field shortens the transient period over which the flow field evolves into a quasi-steady state time harmonic oscillation after g-jitter sets in. The flow intensity increases with an increase in g-jitter magnitude but decreases with an increase in the applied field strength. The reduced convection in the liquid pool by the applied magnetic field results in a reduction of the concentration oscillation. The magnetic field is very useful in suppressing the spiking velocities that are induced by the spikes in the real g-jitter data. The damping effect is more pronounced if the magnetic field is switched on before the onset of g-jitter disturbances.     

OSEK/VDX——汽车电子系统的开放式平台

介绍了当前在国际汽车工业界日益占据主导地位的汽车电子系统开放式平台--OSEK/VDX体系.详细地论述了这种体系的由来、运行机制和最新的发展动向,以及它对汽车电子技术发展的深远影响.     

A new family of yeast genes implicated in ergosterol synthesis is related to the human oxysterol binding protein

We have identified three yeast genes, KES1, HES1 and OSH1, whose products show homology to the human oxysterol binding protein (OSBP). Mutations in these genes resulted in pleiotropic sterol-related phenotypes. These include tryptophan-transport defects and nystatin resistance, shown by double and triple mutants. In addition, mutant combinations showed small but apparently cumulative reductions in membrane ergosterol levels. The three yeast genes are also functionally related as overexpression of HES1 or KES1 alleviated the tryptophan-transport defect in kes1Δ or osh1Δ mutants, respectively. Our study implicates this new yeast gene family in ergosterol synthesis and provides comparative evidence of a role for human OSBP in cholesterol synthesis.     

Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能

研究了预热对Ｔｉ－２３Ａｌ－１４Ｎｂ－３Ｖ合金焊接性，特别是对消除氩弧焊冷裂纹的作用以及对接头显微组织和力学性能的影响。结果表明，焊前预热可有效降低该合金的冷裂倾向。经预热处理后，焊缝区的结晶层状线消失，热影响区的硬度峰得到缓和，整个焊缝的显微硬度分布趋于均匀，但焊缝区的枝晶发生粗化，热影响区有所扩大。焊件接头的拉伸试验表明，预热可使焊缝区的接头强度系数增加，但无论预热与否，接头强度均低于母材强度，且不显示宏观塑性。     

中国香港电信盈科公司近期经营业绩分析

中国香港电信与盈科数码动力有限公司合并以后更名为电信盈科。它由一家以技术为主的电信公司转型为亚太地区、特别是两岸三地的商界及个人客户提供服务的综合通信服务供应商，主要提供电话服务、互联网、商企电贸服务、数据中心、客户联络中心、环球通信服务和基建业务。分析了2001-2002年上半年其电信、商企电贸、基建以及与Telstra结盟等业务市场的经营情况。     

精密深孔表面环状硬挤条纹的产生机理与控制

本文建立了不同条件下环状硬挤条纹的生成模型,详细分析了其产生机理.用理论解析和试验验证了所建模型的可靠性,最后提出了控制其产生的方法.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

求解机械装配规划的新方法

本文提出一个求解机械装配规划的算法,其计算量～O(sN~2),其中s是零件所有可能装配方向的个数,N是工件的零件数(一般s～O(N)).而现行的求机械装配规划的算法,其计算量均随N的增加按指数律增加.     

个性设计

Corus Bausysteme的新KalzipFP立面系统为个性设计创造了广阔的空间．并且使每座建筑都具有自己独一无二的特色。它既适用于建筑的翻新．也适用于新建筑的修建。类似于Kalzip屋顶系统．不同的表面处理（天然的灰泥浮雕、铝加锌、铝加铜）以及各种颜色（有颜色的表面涂层、PVDF或聚酯涂层）都可以采用这种后置通风的立面系统。也可以采用抗涂鸦涂层．它可以保证在不破坏原有覆层的前提下．完全去除损毁的部分。长跨度闸盒的覆盖宽度为250mm、300mm、333mm、500mm和600mm．用一个隐形的弹夹系统就可以将它们安装在有凹口的窗棂上．而不需采用铆钉和螺丝。