Rheological properties of biopolymers drilling fluids

Drilling muds are complex fluids, generally used to clean the well, maintain hole integrity, transport the rock cuttings, lubricate the drill bit and control formation pressures. Two basic types of drilling fluids are used, water based muds (WBM) and oil based muds (OBM). OBM are very effective but polluting, and environmental regulations continue to restrict the use of oil based muds in many areas of the world. In order to reduce the mud toxicity, we developed water based mud systems using two biopolymers, which are xanthan gum and scleroglucan, generally proposed for high permeability reservoirs or for complex geometries such as horizontal wells. In this study, we evaluated the rheological behaviour of different samples and we determined the effect of components such as clay, calcium carbonate and potassium chloride. This formulations exhibit non-Newtonian rheological behaviour which can be described well by the tree parameter in Herschel–Bulkley rheological model.     

Immediate-type heat urticaria: report of a case and study of plasma histamine release

We report a 68-year-old man who had immediate-type heat urticaria with systemic symptoms. Immersing his hand in water at 42 degrees C (heat challenge test) produced an urticarial response, with an increase in the plasma histamine level from 0.26 to 7.64 ng/mL. Administration of oral antihistamines alone did not suppress either the urticarial response or the increase in plasma histamine. However, a combination of antihistamines and desensitization improved the skin lesions and reduced the plasma histamine level. The heat challenge test subsequently provoked a negative response and there was no increase in plasma histamine level 3 months after starting the combination therapy. These results indicate that the histamine level reflected the result of the heat challenge test and the amelioration of the skin eruption.     

Changes in microflora of the cloaca and oviduct of hens after intracloacal or intravaginal inoculation with Salmonella enteritidis

Quantitative and qualitative microbiological examination was carried out on cloacal and oviductal contents pre- and postinfection with Salmonella enteritidis (SE) intracloacally or intravaginally. Before inoculation with SE, the means +/- standard deviation (SD) of total bacterial counts, anaerobic bacterial counts, and aerobic bacterial counts in the cloaca were log10 7.7 +/- 0.7, 7.4 +/- 0.2, and 6.9 +/- 0.8 colony-forming units (CFU)/g, respectively. The predominant bacteria were Bacteroidaceae, Lactobacillus, and Escherichia coli. Before inoculation with SE, the means +/- SD of total bacterial counts, anaerobic bacterial counts, and aerobic bacterial counts in the vagina were log10 5.7 +/- 1.4, 5.5 +/- 1.3, and 3.6 +/- 2.7 CFU/g, respectively. Bacteroidaceae and Lactobacillus were predominant. Following inoculation with SE, only the cloacal population of Lactobacillus in hens inoculated intracloacally was significantly increased compared to that before the inoculation. Other indigenous microflora were stable even after the inoculation. In the uterus, very few bacteria, Lactobacillus and Staphylococcus, were isolated. Five of 20 eggs (25%) from hens inoculated with SE intravaginally were positive for SE, whereas no SE was recovered from 22 eggs in hens inoculated with SE intracloacally. SE was recovered from the uterus after intravaginal inoculation with SE and from the vagina after intracloacal inoculation with SE. Contamination may ascend from the cloaca into the lower parts of the oviduct and subsequently contaminated eggs may occur.     

Collagen and elastin synthesis by desmoid tumor in vitro

In order to characterize human desmoid tumors in vitro, the production of collagen and elastin and the expression of collagen types alpha1(I), alpha1(III) and transforming growth factor (TGF)-beta1 mRNA were investigated in six desmoid tumors; five derived from familial adenomatous polyposis patients and one from a sporadic case. The proportion of collagen production to total protein production was determined by 3H-imino acid incorporation, an indicator of collagen synthesis, using high-performance liquid chromatography (HPLC). The proportion of collagen production to total protein production was much higher in all six desmoid tumors compared with human skin fibroblasts (HSF). Quantitatively, the rate of elastin synthesis in desmoid tumor cells monitored by valine-proline peptide was also significantly higher than in HSF. Pro-alpha1(I) collagen mRNA was highly expressed in both desmoid tumors and HSF at approximately the same level, whereas pro-alpha1(III) collagen mRNA was more abundant in some of the desmoid tumors than the normal skin fibroblastic cell lines. Tumor growth factor-beta1 mRNA, which is believed to stimulate collagen synthesis, was expressed in both desmoid tumors and HSF to the same extent. These results demonstrate the increased formation of collagen and elastin in desmoid tumors in vitro and suggest that the increased synthesis of elastin rather than of collagen and TGF-beta1 may be involved in increased fibrogenesis by desmoid tumors.     

Effect of tylosin tartrate on humoral immune responses in chickens

This article examines the 50-year struggle of osteopathic physicians to gain entry into the US Military Medical Corps on the same basis as allopathic physicians. The author explores various arguments put forth by both physician groups, as well as those arguments presented by the respective surgeons general and relevant government officials.     

Wind-flow measurement over the Subaru Telescope

Wind flows over the 8.2-m Subaru Telescope at Mauna Kea in Hawaii were analyzed with a correlation method. Three or four wind flows were detected from our measurements. Spatial and temporal resolution of the wind-flow analysis across the 8.2 m pupil were investigated experimentally. A three-dimensional spatiotemporal-frequency analysis was also applied to the wind-flow data.     

Microassembly of semiconductor three-dimensional photonic crystals

Electronic devices and their highly integrated components formed from semiconductor crystals contain complex three-dimensional (3D) arrangements of elements and wiring. Photonic crystals, being analogous to semiconductor crystals, are expected to require a 3D structure to form successful optoelectronic devices. Here, we report a novel fabrication technology for a semiconductor 3D photonic crystal by uniting integrated circuit processing technology with micromanipulation. Four- to twenty-layered (five periods) crystals, including one with a controlled defect, for infrared wavelengths of 3-4.5 microm, were integrated at predetermined positions on a chip (structural error <50 nm). Numerical calculations revealed that a transmission peak observed at the upper frequency edge of the bandgap originated from the excitation of a resonant guided mode in the defective layers. Despite their importance, detailed discussions on the defective modes of 3D photonic crystals for such short wavelengths have not been reported before. This technology offers great potential for the production of optical wavelength photonic crystal devices.     

Applying secondary ion mass spectrometry to the analysis of elements in goblet cells of conjunctiva

We investigated the location of elements in the goblet cells of rat conjunctiva by analyzing ion images produced by secondary ion mass spectrometry (SIMS) and comparing them with those produced by energy dispersive X-ray analyser (EDX). Conjunctivas of normal Spraque-Dawley rats were quenched in propane prechilled liquid nitrogen. Semi-thin sections were made with a cryo-ultramicrotome, freeze-dried, carbon-coated and observed under a light microscope, SIMS and scanning electron microscope (SEM). In the element analysis by SIMS, images of positive ions were examined with an O2+ primary ion source and images of negative ions with a Ga+ ion source. The same sections were observed and analysed with SEM-EDX. Morphological features and images of elements with SIMS and EDX were compared. Na, Mg, K, and Ca were detected as positive ions and OH, CN, P, S, and Cl as negative ions with SIMS, but C, N, O, Na, Mg, P, S, Cl, K, and Ca were detected with EDX. The spatial resolution of SIMS in element location was higher than that of EDX. Many elements were clearly located in the goblet cells on ion images by SIMS. Element ion images were demonstrated more densely in goblet cells than in other parts within conjunctiva and by SIMS compared to EDX. SIMS is a useful method for the detection of elements and their locations in ocular tissues and cells.