Rapid consolidation of powdered materials by induction hot pressing

A rapid hot press system in which the heat is supplied by RF induction to rapidly consolidate thermoelectric materials is described. Use of RF induction heating enables rapid heating and consolidation of powdered materials over a wide temperature range. Such rapid consolidation in nanomaterials is typically performed by spark plasma sintering (SPS) which can be much more expensive. Details of the system design, instrumentation, and performance using a thermoelectric material as an example are reported. The Seebeck coefficient, electrical resistivity, and thermal diffusivity of thermoelectric PbTe material pressed at an optimized temperature and time in this system are shown to agree with material consolidated under typical consolidation parameters.     

Self-generation of reward by logarithmic transformation of multiple sensor evaluations

Artificial Life and Robotics - Although the design of the reward function in reinforcement learning is important, it is difficult to design a system that can adapt to a variety of environments and...     

Negative emotion recognition using multimodal physiological signals for advanced driver assistance systems

Artificial Life and Robotics - Recent advanced driver assistance systems’ (ADASs) control cars to avoid accidents, but few of them consider driver’s comfort. To realize comfortable...     

Patterning of Discotic Liquid Crystals with Tunable Molecular Orientation for Electronic Applications

The large‐area formation of functional micropatterns with liquid crystals is of great significance for diversified applications in interdisciplinary fields. Meanwhile, the control of molecular alignment in the patterns is fundamental and prerequisite for the adequate exploitation of their photoelectric properties. However, it would be extremely complicated and challenging for discotic liquid crystals (DLCs) to achieve the goal, because they are insensitive to external fields and surface chemistry. Herein, a simple method of patterning and aligning DLCs on flat substrates is disclosed through precise control of the formation and dewetting of the capillary liquid bridges, within which the DLC molecules are confined. Large‐area uniform alignment occurs spontaneously due to directional shearing force when the solvent is slowly evaporated and programmable patterns could be directly generated on desired substrates. Moreover, the in‐plane column direction of DLCs is tunable by slightly tailoring their chemical structures which changes their self‐assembly behaviors in liquid bridges. The patterned DLCs show molecular orientation–dependent charge transport properties and are promising for templating self‐assembly of other materials. The study provides a facile method for manipulation of the macroscopic patterns and microscopic molecular orientation which opens up new opportunities for electronic applications of DLCs.     

Fetal heart rate patterns in postasphyxiated fetal lambs with brain damage

OBJECTIVE: We previously showed that in asphyxiated fetal lambs the duration of hypotension correlated well with the severity of histologic damage to the brain, whereas the duration of bradycardia did not. This study compares fetal heart rate patterns with the degree of histologic damage to the brain. STUDY DESIGN: Twelve chronically instrumented near-term fetal lambs were subjected to asphyxia by umbilical cord occlusion until fetal arterial pH was <6. 9 and base excess was <-20 mEq/L. An additional 4 fetuses served as sham-asphyxia controls. Fetal heart rate (from electrocardiogram), arterial blood pressure, fetal breathing movements, and electrocorticogram were continuously monitored before, during, and for 72 hours after asphyxia. Fetal brain histologic features were categorized as mild (group 1, n = 5), moderate (group 2, n = 4), and severe (group 3, n = 3). Long-term fetal heart rate variability expressed as amplitude range was assessed visually every 5 minutes from 30 minutes before asphyxia until 2 hours of recovery and at 6, 12, 24, 48, and 72 hours of recovery. RESULTS: Long-term fetal heart rate variability amplitude decreased from 32 +/- 17 beats/min (mean +/- SEM) preocclusion to 4 +/- 13 beats/min at the end of occlusion (P <.001) without significant differences among the 3 groups. During 10 to 45 minutes of recovery, the long-term variability of group 1 was significantly greater than that of groups 2 and 3. At 24 to 72 hours of recovery, the long-term variability of groups 1 and 2 was significantly higher than that of group 3, which was almost 0. The "checkmark" and sinusoidal fetal heart rate patterns were observed during the recovery period in groups 2 and 3. CONCLUSIONS: Decreased long-term fetal heart rate variability and the "checkmark" and sinusoidal fetal heart rate patterns were indicators of the severity of asphyxial histologic damage in the fetal brain.     

Crossover from 3D to 2D metallic conduction in Sr2RuO4

We have investigated the normal-state conduction of superconducting Sr₂RuO₄ (T_c 1K), which is isostructural to La_2–xSr_xCuO₄. The resistivity of single crystals shows a crossover at T_M130K from 3D metallic conduction at lower temperatures to 2D one at higher temperatures. Concerning the temperature dependence of the out-of-plane resistivity, we present a systematic interpretation based on competition between the life time of the quasiparticles and the time for the quasiparticles to travel between the adjacent RuO₂ planes.     

NMR study of quaternary superconductor RM2B2C (R = Y,La, Th,and M = Ni,Pd, Pt)

¹⁹⁵Pt-,¹³⁹La- and¹¹B-NMR have been investigated in quaternary RM₂B₂C (R=Y, La, Th and M=Ni, Pd, Pt). The electric quadrupole frequency of¹³⁹La changes more than 5 times in magnitude from M=Ni to Pt, indicating that the hybridization of La-5d and d-electrons of M-element changes largely. The analysis of¹¹B and¹³⁹La spectra shows also the large change of the magnetic anisotropy with R and M element, i.e., _{II c}>_{II ab} in LaNi₂B₂C, but _{II c}>_{II ab} YNi₂B₂C.The data of T₁T and K of¹⁹⁵Pt and¹¹B are consistent with the band effects and with no evidence of strong antiferromagnetic correlation effects.     

Quantitative determination of cardiac glycosides in Digitalis lanata leaves by reversed-phase thin-layer chromatography

We have recently chosen to undertake a comprehensive evaluation of the modulation of gene expression by oxidative stress, using mRNA as a marker. Our model system is HA-1 hamster fibroblasts, using conditions under which we observe an adaptive response. Under these conditions, the HA-1 cells respond to a minimally toxic "pretreatment" dose of hydrogen peroxide by synthesizing RNAs and proteins that protect them against subsequent exposure to a highly cytotoxic concentration of hydrogen peroxide. Using the differential display technique to screen for modulated RNAs, we have recently reported an RNA species, adapt15/gadd7, whose steady-state level is significantly induced by a pretreatment dose of hydrogen peroxide (D. R. Crawford, G. P. Schools, S. L. Salmon, and K. J. A. Davies (1996) Arch. Biochem. Biophys. 325, 256-264). Here we report a second induced mRNA, designated adapt33. Two homologous adapt33 mRNAs were revealed by Northern blot hybridization. Both of these species were inducible by hydrogen peroxide, and they were sized at 1.46 and 0.99 kb. These inductions appeared to be dependent upon calcium, occurred as early as 90 min, and were maximal at 5 h. Cell fractionation revealed that a significant proportion of adapt33 RNA is associated with active translation. adapt33 is a novel sequence, as determined by cloning, sequencing, and GenBank analysis. adapt33 represents a new oxidant-inducible RNA and marker of cellular oxidative stress and a potential aid in the study, detection, and possible therapy of oxidant-related disorders.     

Design of discrete time adaptive PID control systems with parallel feedforward compensator

This paper deals with the design of an adaptive PID control system with a parallel feedforward compensator (PFC) for discrete-time SISO systems and its application to water level control of a 3-tank system. The proposed method utilizes the characteristics of almost strict positive realness (ASPR) of the controlled plant. A conventional design scheme of a PFC which realizes an ASPR augmented controlled plant is also proposed. Further it is shown that the introduction of an internal model improves the control performance of the control system with the PFC. The effectiveness of the proposed method is confirmed through water level control experiments on a three-tank SISO system.