Noninvasive blood glucose assay using a newly developed near-infrared system

This paper reports in vivo near-infrared (NIR) noninvasive blood glucose assay using dermis tissue spectra. We assume that the glucose content in dermis tissue traces the variations in blood glucose. For dermis spectra measurements, epidermis, especially stratum corneum, acts as an interference in skin tissue. Thus, we have developed a method for the selective measurement of dermis tissue spectra, enabling us to obtain better quality spectra for an accurate blood glucose assay. The selective measurement of the dermis spectra realized by using a newly developed fiber-optic probe that consists of source and detector optical fibers separated by 0.65 mm on a skin surface. The light path in the skin tissue for this geometry has been simulated by a Monte Carlo method. The simulation results show that detected light mainly interrogates dermis tissue. As the absorbance signal of glucose in human tissue is extremely small, the quality of the measured spectra is critical for the reliable assay. The present method for blood glucose assay has been applied to one Type 1 diabetic. The correlation coefficient between the blood glucose content predicted by NIR spectra and those measured by finger-prick was 0.928 and the standard error of prediction was 32.2 mg/dL. These results demonstrate the potential of our methodology for noninvasive NIR blood glucose assay.     

Cooperative Control by System Voltage Control Equipments in Consideration of Reducing Capacity of STATCOM

In recent years, the number of renewable energy sources (RESs) such as photovoltaic generation systems and wind power generation systems connected to the grid has been increasing as a way of reducing negative effects on the environment. The outputs of these RESs vary rapidly because of the influence of the weather and the conditions of the location. Therefore, there are concerns that the point voltages in a distribution system may vary drastically and that the voltages may deviate from the appropriate voltage range as a result of the influence of the RES connected to the distribution system or to the diversification of loads. Furthermore, there are concerns about adverse effects on electric power quality, such as voltage imbalances and harmonics. In this paper, we propose a cooperative voltage control method for a distribution system using system voltage control equipment in order to reduce the capacity of the static synchronous compensator. Numerical calculations were performed in order to verify the validity of the proposed method.     

Chitin Foils and Coatings Prepared from Ionic Liquids

Chitin and its deacetylated derivative, chitosan, are nontoxic, antibacterial, biodegradable, and biocompatible biopolymers. Due to these properties, they are widely used for biomedical applications such as scaffolds for tissue engineering, wound dressings, separation membranes and antibacterial coatings. Unfortunately, there is still a lack of suitable solvent systems for the direct processing of chitin, e.g., into films and coatings. Such solvents must be nontoxic, noncorrosive, nondegrading, and allow for high chitin concentrations. Here, the potential of designed ionic liquids (IL) as solvents for chitin is outlined. Phosphonium‐ and imidazolium‐based ILs are synthesized, characterized and the influence of the cation on the solution process has been evaluated. It is shown that particularly imidazolium carboxylate‐based ILs are appropriate solvents for chitin and are suitable for the production of foils and coatings on both fabrics and foams.

     

Synthesis,properties, and solid-state assemblies of β-alkyl-substituted dipyrrolyldiketone BF2 complexes

In this paper, the synthesis and solid-state structures of β-alkyl-substituted dipyrrolyldiketone BF₂ complexes are discussed; these complexes can function as π-conjugated acyclic anion receptors (“molecular flippers”) and are potential building subunits of anion-responsive π-conjugated oligomers or polymers. Modes of the solid-state assemblies in these complexes determined by performing single-crystal X-ray analysis are found to depend on the lengths of the alkyl chains at the β-positions. A β-methyl-substituted receptor has a highly planar structure, which efficiently forms stacking assemblies in the core π-plane in the solid state, while a β-ethyl-substituted receptor shows no stacking assemblies due to the presence of bulky ethyl moieties, which form only dimeric structures by hydrogen bonding. β-Alkyl-substituted anion receptors can be used not only as monomer units of stimuli-responsive polymeric macromolecules but also as components of solid-state electronic materials.     

Homogeneous and Disordered Assembly of Densely Packed Nanocrystals

A homogeneous and disordered assembly of densely packed nanocrystals is generated without the assistance of organic molecules, from an aqueous solution at room temperature. The densely packed nanocrystals of tin dioxide (SnO₂) and titanium dioxide (TiO₂), 2–3 nm in size, form glassy macroscopic transparent objects of 2–10 mm. The monodisperse nanocrystals, which have a surface hydrated layer and are synthesized in aqueous solution, are densely packed in an homogeneous and disordered assembly through the evaporation of water as the dispersion medium. The formation of transparent bulk objects on the macroscopic scale originates from the homogeneous and disordered nature of the densely packed nanocrystals. The resultant homogeneous architectures are distinguishable from the typical inhomogeneous and disordered aggregates of nanoparticles observed after evaporation of the dispersion medium. Among superstructures based on nanocrystals, such as superlattices and mesocrystals, the resultant homogeneous and disordered assembly can be regarded as a new class of solid‐state material.     

Energy Efficiency of a Multi-Core Processor by Tag Reduction

We consider the energy saving problem for caches on a multi-core processor.In the previous research on low power processors,there are various methods to reduce power dissipation.Tag reduction is one of them.This paper extends the tag reduction technique on a single-core processor to a multi-core processor and investigates the potential of energy saving for multi-core processors.We formulate our approach as an equivalent problem which is to find an assignment of the whole instruction pages in the physical memory to a set of cores such that the tag-reduction conflicts for each core can be mostly avoided or reduced.We then propose three algorithms using different heuristics for this assignment problem.We provide convincing experimental results by collecting experimental data from a real operating system instead of the traditional way using a processor simulator that cannot simulate operating system functions and the full memory hierarchy.Experimental results show that our proposed algorithms can save total energy up to 83.93% on an 8-core processor and 76.16% on a 4-core processor in average compared to the one that the tag-reduction is not used for.They also significantly outperform the tag reduction based algorithm on a single-core processor.     

Infrared and raman investigations of the charge ordering phenomena in the monoclinic salts κ-(BEDT-TTF)4[M(CN)6][N(C2H5)4]·2H2O (M=CoIII, FeIII)

The monoclinic crystals of κ-phase charge-transfer salts formed by BEDT-TTF with Co(CN)₆ or Fe(CN)₆ anions undergo a phase transition at T=150 K. Temperature dependences of FT-NIR Raman spectra and IR reflectance spectra were studied. We show that the phase transition is related to a charge ordering and there exist charge fluctuations above 150 K.     

Utilization of a Biodegradable Mulch Sheet Produced from Poly(Lactic Acid)/Ecoflex?/Modified Starch in Mandarin Orange Groves

We have developed a mulch sheet made by inflation molding of PLA, Ecoflex^® and modified starch, which all have different biodegradabilities. A field test of use as an agricultural mulch sheet for mandarin oranges was carried out over two years. The mechanical properties of the mulch sheet were weakened with time during the field test, but the quality of the mandarin oranges increased, a result of the controlled degradation of the sheet. The most degradable modified starch degraded first, allowing control of the moisture on the soil. Accelerator mass spectroscopy was used for evaluation of the biomass carbon ratio. The biomass carbon ratio decreased by degradation of the biobased materials, PLA and modified starch in the mulch sheet.