On the electrochemical activation of alkali-treated soft carbon for advanced electrochemical capacitors

The electrochemical activation process of the so-called “alkali-treated soft carbon” (ASC) has been examined in organic electrolyte solutions. SEM observation demonstrated that the edge plane of graphene structure of the ASC particle becomes rough after the activation, and XRD measurements indicated that the average lattice constant of graphene stacking in ASC increases after the activation process. Ex-situ ⁷Li NMR measurements proved that the insertion of cation (Li⁺) into the pore structure of ASC is associated with the activation process in the electrolyte dissolving Li salt. The pore-size distribution determined from N₂-gas adsorption for ASC electrodes before and after the electrochemical activation indicates that the pore structure becomes developed after the electrochemical polarization, especially in the pore-diameter range of 2–10 nm. A schematic model of the activation process has been presented, which includes electrochemical insertion of ions into the inside of the ASC.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Thermal Stability,Optical Transmittance,and Refractive Index Dispersion of La2O3–Nb2O5–Al2O3 Glasses

La₂O₃–Nb₂O₅–Al₂O₃ high‐refractive‐index glasses were fabricated by containerless processing, and the glass‐forming region was determined. The thermal stability, density, optical transmittance, and the refractive index dispersion of these glasses were investigated. All the glasses were colorless and transparent in the visible to near infrared (NIR) region and had high refractive index with low wavelength dispersion. Some of these glasses were found to have significantly high glass‐forming ability. These results indicate that the ternary glasses are suitable for optical applications in the visible to NIR region. The effects of the substitution of Al₂O₃ for Nb₂O₅ on optical properties were discussed on the basis of the Drude–Voigt equation. It was suggested that the substitution of Al₂O₃ for Nb₂O₅ increased the molecular density and suppressed a decrease in the refractive index, even when both the average oscillator strength and inherent absorption wavelength decreased in La₂O₃–Nb₂O₅–Al₂O₃ glasses. These results are helpful for designing new optical glasses controlled to have a higher refractive index and lower wavelength dispersion.     

Dynamic Characteristics Analysis of Two‐DOF Oscillatory Actuator and Experimental Verification of Prototype

Recently, linear oscillatory actuators have been used in a wide range of applications. In particular, small linear oscillatory actuators are expected to be used in haptic devices by being extended to provide multi‐degree‐of‐freedom motion with arbitrary acceleration. In this paper, we propose a compact two‐DOF oscillatory actuator that can move in various directions on a plane. The static and dynamic characteristics of the actuator are determined by the 3D finite element method. The effectiveness of this method is shown through a comparison of the measured results with the experimental results from a prototype. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 58–65, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22312     

Beat Noise Mitigation of Spectral Amplitude Coding OCDMA Using Heterodyne Detection

In order to relax the limitation of the number of multiplexed signal lights caused by beat noise between signal lights, we investigate the applicability of a heterodyne detection technique to a spectral amplitude coding optical code division multiple access scheme. In this investigation, for the first time, we found analytically that the optical frequency chips that form parts of the signal and local lights require uniform phase differences even for envelope detection. We also confirm this requirement and our theoretical analysis experimentally.     

Covalently cross-linked multilayer thin films composed of diazoresin and brilliant yellow for an optical pH sensor

The multilayered thin films composed diazoresin (DR) and brilliant yellow (BY) were fabricated by a layer-by-layer (LbL) deposition technique, and the ionic bonds between diazonium ion in DR and sulfonate residues in BY were converted to covalent bonds by UV light irradiation. The cross-linking between BY and DR prevented BY from desorption even in a pH 13 solution. The cross-linked (DR/BY)₁₀DR film exhibited pH-dependent absorption spectra in pH 9-13, and the response was repeatable and quick. The pH response time of the films was within a few seconds upon change from pH 9.0 to 13.0, and ca. 40 s upon change from pH 13.0 to 9.0.     

Novel Video Memory Reduces 45% of Bitline Power Using Majority Logic and Data-Bit Reordering

We propose a low-power two-port SRAM for real-time video processing that exploits statistical similarity in images. To minimize the discharge power on a read bitline, a majority-logic circuit decides if input data should be inverted in a write cycle, so that ldquo1rdquos are in the majority. In addition, for further power reduction, write-in data are reordered into digit groups from the most significant bit group to the least significant bit group. The measurement result of a 68-kbit video memory in a 90-nm process demonstrates that a 45% power saving is achieved on the read bitline. The speed and area overheads are 4% and 7%, respectively.     

High-speed InGaAlAs-InAlAs MQW directional coupler waveguide switchmodules integrated with a spotsize converter having a lateral taper,thin-film core, and ridge

Fully packaged 2×2 and 4×4 semiconductor optical switch modules are successfully developed by integrating spotsize converters (SSCs) consisting of lateral tapers, thin-film cores, and ridges in InGaAlAs-InAlAs multiple quantum-well (MQW) directional coupler waveguide switches in the 1.55-μm wavelength region. Good reproducibility is obtained for the perfect coupling length of the directional coupler by appropriately designing the ridge width and gap of strip-loaded optical waveguides and by making use of the Cl₂ reactive-ion-beam-etching and successive wet-etching. Since the switching time is sufficiently short (<70 ps, which is limited by the driver speed) for the 4×4 switch module, no bits are lost during a 10-Gb/s switching experiment at a wavelength of 1.55 μm     

Synthesis,properties, and solid-state assemblies of β-alkyl-substituted dipyrrolyldiketone BF2 complexes

In this paper, the synthesis and solid-state structures of β-alkyl-substituted dipyrrolyldiketone BF₂ complexes are discussed; these complexes can function as π-conjugated acyclic anion receptors (“molecular flippers”) and are potential building subunits of anion-responsive π-conjugated oligomers or polymers. Modes of the solid-state assemblies in these complexes determined by performing single-crystal X-ray analysis are found to depend on the lengths of the alkyl chains at the β-positions. A β-methyl-substituted receptor has a highly planar structure, which efficiently forms stacking assemblies in the core π-plane in the solid state, while a β-ethyl-substituted receptor shows no stacking assemblies due to the presence of bulky ethyl moieties, which form only dimeric structures by hydrogen bonding. β-Alkyl-substituted anion receptors can be used not only as monomer units of stimuli-responsive polymeric macromolecules but also as components of solid-state electronic materials.     

Homogeneous and Disordered Assembly of Densely Packed Nanocrystals

A homogeneous and disordered assembly of densely packed nanocrystals is generated without the assistance of organic molecules, from an aqueous solution at room temperature. The densely packed nanocrystals of tin dioxide (SnO₂) and titanium dioxide (TiO₂), 2–3 nm in size, form glassy macroscopic transparent objects of 2–10 mm. The monodisperse nanocrystals, which have a surface hydrated layer and are synthesized in aqueous solution, are densely packed in an homogeneous and disordered assembly through the evaporation of water as the dispersion medium. The formation of transparent bulk objects on the macroscopic scale originates from the homogeneous and disordered nature of the densely packed nanocrystals. The resultant homogeneous architectures are distinguishable from the typical inhomogeneous and disordered aggregates of nanoparticles observed after evaporation of the dispersion medium. Among superstructures based on nanocrystals, such as superlattices and mesocrystals, the resultant homogeneous and disordered assembly can be regarded as a new class of solid‐state material.