丙烯酸酯聚氨酯紫外固化凝胶生成动力学研究

采用丙烯酸酯聚氨酯和二苯甲酮/安息香乙醚复合光敏剂,对该体系紫外光固化反应的凝胶生成动力学进行分析。用红外光谱定量测定光聚合过程的变化,发现光聚合反应主要是以双键打开,交联为特征的,并得出1408cm~(-1)双键吸收峰随光照时间而变化的关系式:P_(c=c)=0.325 t~(0.135)。临界凝胶点可由双键反应程度与凝胶分数之间关系外推得到,凝胶点后,体系中存在一个凝胶与溶胶之间分配关系,此时凝胶与溶胶共存,凝胶中双键反应程度P_(A(g))>总双键反应程度P_A>溶胶中双键反应程度P_(A(S))。随着凝胶增加,P_A和P_(A(g))逐渐上升,而P_(A(s))下降。此体系的紫外固化实验工作曲线与理论值基本一致。     

全局最小均方算法

本文提出了一种基于全局均方误差最小准则的全局最小均方（ＴＬＭＳ）算法，在理论上分析了它的统计特性和收敛性，用数字仿真技术优良地它的性能。     

含氮化合物废气选择性催化氧化技术研究进展

通过对当前含氮化合物废气治理技术的对比分析,总结选择性催化氧化的相关技术优势。根据对含氮化合物的种类及来源分析,介绍氨气、腈类、胺类及其他含氮化合物的催化净化技术。重点总结催化剂的种类、研发进展和在实际使用中可能遇到的问题,同时展望含氮化合物废气选择性催化氧化技术的研发方向。     

OFDM技术及其应用

首先对OFDM的发展以及应用做了简要的介绍,然后讨论了当前OFDM研究过程中的两个关键技术问题,最后展望了OFDM的未来发展。     

A general approach for the stability analysis of the time-domain finite-element method for electromagnetic simulations

This paper presents a general approach for the stability analysis of the time-domain finite-element method (TDFEM) for electromagnetic simulations. Derived from the discrete system analysis, the approach determines the stability by analyzing the root-locus map of a characteristic equation and evaluating the spectral radius of the finite element system matrix. The approach is applicable to the TDFEM simulation involving dispersive media and to various temporal discretization schemes such as the central difference, forward difference, backward difference, and Newmark methods. It is shown that the stability of the TDFEM is determined by the material property and by the temporal and spatial discretization schemes. The proposed approach is applied to a variety of TDFEM schemes, which include: (1) time-domain finite-element modeling of dispersive media; (2) time-domain finite element-boundary integral method; (3) higher order TDFEM; and (4) orthogonal TDFEM. Numerical results demonstrate the validity of the proposed approach for stability analysis.     

计算机辅助药物设计专家系统Apex中镇痛药物数据库的建立

文章扼要介绍了计算机辅助药物设计专家系统Ａｐｅｘ中镇痛药物建立的方法和过程，同时也讨论了用药物设计专家系统Ａｐｅｘ进行全新药物设计的方法，并依据哌替啶类药物的药效团设计了一个与这一药效团相符的新化合物。     

剂量率对聚四氟乙烯辐射裂解的影响

本文研究了在以电子加速器的电子射线为辐射源时,剂量率对PTFE辐射裂解的影响。在剂量相同的条件下,剂量率从1.44×10~4 rad/s增至5.75×10~4 rad/s,裂解效率提高3.3倍。剂量率和各断裂参数(单位剂量裂解度a_0,G(s)值等)均成线性关系。当裂解度一定时,剂量率与剂量成反变关系。     

Temporal and molecular characteristics of lacZ mutations in somatic tissues of transgenic mice

In order to help establish criteria for optimizing protocols for in vivo mutation studies, lacZ transgenic mice (Muta mouse) were treated with five consecutive daily doses of ethylnitrosourea (50 mg/kg), sampled at times up to 55 days after treatment, and mutant frequencies and DNA sequences determined for liver and bone marrow. In the bone marrow, the mutant frequency rose very rapidly in the first 5 days after treatment to 34 times the control frequency. Subsequently, there was a brood peak where the mutant frequency did not vary significantly, although it did appear to begin to decline after 45 days. In contrast, in the liver, the peak mutant frequency (11 times the control frequency) was not achieved until 35 days, after which there appeared to be a slow decline up to 55 days, which was not statistically significant. Once the maximum mutant frequency was reached, the mutation spectra in the two tissues were indistinguishable. In contrast to the G:C-->A:T transitions in 5'-CpG sites characteristic of untreated mice, A:T-->T:A transversions and A:T-->G:C transitions were prominent in both liver and bone marrow of ENU-treated mice, suggesting the involvement of unrepaired O2- and O4-ethylthymine adducts. In addition, G:C-->T:A transversions were induced in liver. This study demonstrates the possibility that although tissues may have different mutation fixation times, a single mutation fixation time equal to the longest time may be appropriate for in vivo mutation studies, provided that the mutation frequency does not decline appreciably after the peak is reached. This study also illustrates the necessity of ensuring that mutation characteristics are determined after optimal fixation has occurred.     

A Generic Pigment Model for Digital Painting

We propose a generic pigment model suitable for digital painting in a wide range of genres including traditional Chinese painting and water-based painting. The model embodies a simulation of the pigment-water solution and its interaction with the brush and the paper at the level of pigment particles; such a level of detail is needed for achieving highly intricate effects by the artist. The simulation covers pigment diffusion and sorption processes at the paper surface, and aspects of pigment particle deposition on the paper. We follow rules and formulations from quantitative studies of adsorption and diffusion processes in surface chemistry and the textile industry. The result is a pigment model that spans a continuum from the very wet to the very dry brush stroke effects. We also propose a new pigment mixing method based on machine learning techniques to emulate pigment mixing in real life as well as to support the creation of new artificial pigments. To experiment with the proposed model, we embedded the model in a sophisticated digital brush system. The combined system exhibits interactive speed on a modest PC platform. http://www.cs.hku.hk/~songhua/pigment provides supplementary materials for this paper.