高聚物中渗入C_(60)/C_(70)后计算内阻的压力函数法

应用宏观力学模型对高聚物渗入Ｃ６０／Ｃ７０后的微观内阻机理进行力学分析,提出分子滚珠轴承的设想,得出计算内阻的压力函数法和滚滑内阻权函数的概念。     

电势公式Φ=q/(4πε_o)(1/r-1/r′)的推广应用研究

根据唯一性定理及镜像法把真空中的电势公式Φ =q4πεo(1r - 1r′)推广到电介质中去 ,使电介质中电势的求解问题得到了进一步简化     

添加ZrO2对铜基摩擦材料摩擦磨损性能的影响

采用粉末冶金方法制备了高速列车用铜基摩擦材料,研究了添加ZrO2的量对材料的摩擦因数、磨损量的影响规律。结果表明:在添加ZrO2的材料中,含5%(质量分数,下同)ZrO2的材料摩擦因数较高,磨损量也较大;添加8%ZrO2的材料在高速下的摩擦因数较高,磨损率较小且变化平稳。材料的磨损在较低的速度下以粘着磨损为主;随着速度的上升,磨损也逐渐变成以剥层脱落和氧化磨损的混合机制为主。     

A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

斩波串级调速系统换相失败的分析与仿真

换相失败是串级调速系统逆变器的常见故障,与许多因素有关。分析了串级调速系统换相失败的原因及其影响因素,并针对电源故障引起的换相失败,提出了控制方法,运用MATLAB/simulink对该方法进行仿真研究。结果表明该方法是准确的、可行的,便于工程上的应用研究。     

SPS烧结M42粉末冶金高速钢的显微组织与性能

采用放电等离子烧结技术(SPS)制备了M42粉末冶金高速钢,研究了SPS烧结M42粉末冶金高速钢及其热处理后的显微组织与性能。结果表明:与普通粉末冶金高速钢相比,SPS烧结制备的M42粉末冶金高速钢显微组织均匀、晶粒细小、无碳化物偏析。经过在1180℃×5min×550℃×1h的热处理后,硬度比普通粉末冶金高速钢提高1～2HRC。     

二维三氧化钨纳米结构的合成及其在光电探测器中的应用

三氧化钨（WO₃）是制造晶体管和光电探测器的理想材料,虽然在WO₃纳米结构的生长方面已经完成了一些工作,但是制造足够长的理想型纳米线仍然是一个挑战。在众多的合成方法中,作者选择了化学气相沉积（CVD）方法合成WO₃纳米线,并对其在光电传感器中的应用进行了研究。影响WO₃纳米线成品率的主要因素是前体材料温度、基片位置、载气流速和生长持续时间。在合适的生长条件下生长的纳米线长度最长约为100 μm。这些WO₃纳米线可用来制造高性能的光电探测器,WO₃光电探测器具有灵敏度高、响应速度快、模块微型化等优良的器件性能,表明二维WO₃纳米线在光电探测器的制造中具有很大的优势。      

燃气轮机叶片材料0Cr17Ni4Cu4Nb砂带磨削性能研究

理论分析了在切除过程中磨粒与材料表面的交互作用机理,进行了砂带磨削燃气轮机叶片材料0Cr17Ni4Cu4Nb的试验研究,系统分析了各磨削工艺参数对材料切除率的影响规律,该研究对生产实践具有理论指导意义.     

Antireflection and band gap extension effects of ZnO nanocrystalline films grown on ITO-coated glasses by low temperature process

Zinc oxide (ZnO) nanocrystalline films coated on indium tin oxides (ITO, 90:10 wt%) glasses were prepared by low temperature process. The thin films were composed of uniform nanoparticles with average diameter around 8.4 nm. All samples exhibited excellent optical antireflective phenomena, and the maximum transmission reached 92.8% for the sample spin coated at 1500 rpm at 453 nm, improved by 21.5%. The antireflective results were explained by the coherence theory. And the antireflective effects were induced by the ITO and ZnO films. The calculated thicknesses of the ZnO films agreed well with the experimental results. The theoretical calculated band gap from the average diameter of ZnO nanoparticles was also well consistent with the experimental ones obtained from the optical transmission spectra. This result was promising for applications in organic solar cells.     

重载包装木箱端板结构分析

比较重载包装木箱端板的原有设计与加入斜挡的改进设计的端板结构受力分析,通过计算,改进后的端板结构端梁抗弯强度提高12倍,端面角立柱的抗压强度提高3倍,有效提高了重载包装木箱承载能力.