Synthesis of phosphonated styrenic copolymers and their chemical modifications

We report, for the first time, the synthesis of a phosphonated styrenic monomer dimethyl vinylbenzyl phosphonate (VBP) according to the methods described in the literature for its equivalent diethyl vinylbenzyl phosphonate, and also the monodealkylation of this monomer (VBP) to the monosalt in a neutral medium and to the corresponding monoacid via a sulfonic resin. Various statistical copolymers and statistical block copolymers of styrene and VBP were prepared with different molar percentages of these comonomers. The dealkylation of statistical copolymers was carried out in the same way as for VBP. The phosphonated statistical copolymers, prepared, were characterized by various analytical methods which show good agreement with their structures. © 2002 Society of Chemical Industry     

(<Emphasis Type="Italic">E,E</Emphasis>)-α-Farnesene,an Alarm Pheromone of the Termite <Emphasis Type="Italic">Prorhinotermes canalifrons</Emphasis>

The behavioral and electroantennographic responses of Prorhinotermes canalifrons to its soldier frontal gland secretion, and two separated major components of the secretion, (E)-1-nitropentadec-1-ene and (E,E)-α-farnesene, were studied in laboratory experiments. Behavioral experiments showed that both the frontal gland secretion and (E,E)-α-farnesene triggered alarm reactions in P. canalifrons, whereas (E)-1-nitropentadec-1-ene did not affect the behavior of termite groups. The alarm reactions were characterized by rapid walking of activated termites and efforts to alert and activate other members of the group. Behavioral responses to alarm pheromone differed between homogeneous and mixed groups, suggesting complex interactions. Antennae of both soldiers and pseudergates were sensitive to the frontal gland secretion and to (E,E)-α-farnesene, but soldiers showed stronger responses. The dose responses to (E,E)-α-farnesene were identical for both soldiers and pseudergates, suggesting that both castes use similar receptors to perceive (E,E)-α-farnesene. Our data confirm (E,E)-α-farnesene as an alarm pheromone of P. canalifrons.     

Nanocomposite piezoelectric films of P(VDF‐TrFE)/LiNbO3

Piezoelectric films were prepared by incorporation of lithium niobate (LiNbO₃) nanoparticles into copolymer of vinylidene difluoride and trifluoroethylene. Nanoparticles of LiNbO₃ with ferroelectric phase were successfully synthesized and dispersed homogenously by ultrasonication in the copolymer matrix without any surfactant or surface functionalization. The nanocomposites were fully characterized by electronic microscopy, X‐ray diffraction, differential scanning calorimetry, dynamical mechanical analysis, and piezometer. Surprisingly, the copolymer matrix crystallinity and morphology were not affected by the incorporation of nanoparticles. Therefore the nanocomposites remained good mechanicals properties and high ferroelectricity coupled to nonlinear optical activity thanks to the noncentro symmetric space group of lithium niobate. This could be a novel approach to develop new multifunctional materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Inhibition of HIV-1 by a peptide ligand of the genomic RNA packaging signal Psi

The interaction of the nucleocapsid NCp7 of the human immunodeficiency virus type 1 (HIV-1) Gag polyprotein with the RNA packaging signal Psi ensures specific encapsidation of the dimeric full length viral genome into nascent virus particles. Being an essential step in the HIV-1 replication cycle, specific genome encapsidation represents a promising target for therapeutic intervention. We previously selected peptides binding to HIV-1 Psi-RNA or stem loops (SL) thereof by phage display. Herein, we describe synthesis of peptide variants of the consensus HWWPWW motif on membrane supports to optimize Psi-RNA binding. The optimized peptide, psi-pepB, was characterized in detail with respect to its conformation and binding properties for the SL3 of the Psi packaging signal by NMR and tryptophan fluorescence quenching. Functional analysis revealed that psi-pepB caused a strong reduction of virus release by infected cells as monitored by reduced transduction efficiencies, capsid p24 antigen levels, and electron microscopy. Thus, this peptide shows antiviral activity and could serve as a lead compound to develop new drugs targeting HIV-1.     

Syndiotactic Polystyrene/Organoclay Nanocomposites: Synthesis via In Situ Coordination‐Insertion Polymerization and Preliminary Characterization

Summary: Syndiotactic polystyrene (sPS)/organophilic clay nanocomposites were obtained by in situ coordination‐insertion polymerization of styrene. Two cationic surfactants (alkylammonium and alkylphosphonium) were used for the intercalation of montmorillonite (MMT). For each organically modified clay, three protocols were performed using an MAO‐activated hemi‐metallocene catalyst, in order to compare the influence of experimental conditions on the composite microstructure and on its thermal stability. The microstructures of nanocomposites were investigated by wide angle X‐ray scattering and DSC. Partially exfoliated or intercalated materials were obtained in all cases and a decrease of crystallinity is observed. Thermal properties were also studied by DSC and thermogravimetric analysis. The presence of clay does not have a strong influence on the sPS thermal transitions but the thermal decomposition process of the material was slowed down in the presence of few organoclay percents, particularly in the degradation beginning. The influence of these two organically modified clays on the thermal stability of the material is discussed.

Gel and suspension formed from the combination of cloisite with toluene (left) and styrene (right), respectively.     

MODELING VACUUM-CONTACT DRYING OF WOOD: THE WATER POTENTIAL APPROACH

ABSTRACT

A two-dimensional mathematical model for vacuum-contact drying of wood is presented. The moisture and heat equations are based on the water potential concept whereas the pressure equation is formulated considering unsteady state conservation equation of dry air. Most of the model parameters were determined during independent experiments. The set of equations is then solved in a coupled form using the finite element method. The validation of the model is performed using experimental results obtained during vacuum-contact drying of sugar maple sapwood. The experimental and calculated data are in good agreement. Nevertheless, some discrepancies are observed which can be attributed to the boundary conditions used and to the fact that heat transfer by convection was neglected.     

Electroseparation of an antibacterial peptide fraction from snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes

Recently, a snow crab by-products hydrolysate has demonstrated antibacterial properties due to a peptide with a molecular weight of about 800 Da, but only at high concentration. Consequently, peptide hydrolysate has been fractionated to obtain peptides in a more purified form. The aim of this work was to separate a snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes (EDUF). EDUF, which allows separation of molecules according to their charges and molecular weights, was used to recover and concentrate the active antibacterial fraction. Two different ultrafiltration membranes (20 and 50 kDa) and two electrical field strengths (2 and 14 V/cm) were used as separation parameters. After EDUF separation, the 300-600 Da peptide molecular weight range was the most recovered with an abundance of 94%. Moreover, fractionation at 14 V/cm with ultrafiltration membranes of 50 kDa allowed the recovery of an anionic fraction which showed antibacterial properties on Escherichia coli ATCC 25922 and Listeria innocua HPB 13.     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

Pairwise testing for software product lines: comparison of two approaches

Software Product Lines (SPL) are difficult to validate due to combinatorics induced by variability, which in turn leads to combinatorial explosion of the number of derivable products. Exhaustive testing in such a large products space is hardly feasible. Hence, one possible option is to test SPLs by generating test configurations that cover all possible t feature interactions (t-wise). It dramatically reduces the number of test products while ensuring reasonable SPL coverage. In this paper, we report our experience on applying t-wise techniques for SPL with two independent toolsets developed by the authors. One focuses on generality and splits the generation problem according to strategies. The other emphasizes providing efficient generation. To evaluate the respective merits of the approaches, measures such as the number of generated test configurations and the similarity between them are provided. By applying these measures, we were able to derive useful insights for pairwise and t-wise testing of product lines.