Repair of extensive ionizing-radiation DNA damage at 95 degrees C in the hyperthermophilic archaeon Pyrococcus furiosus

We investigated the capacity of the hyperthermophile Pyrococcus furiosus for DNA repair by measuring survival at high levels of 60Co gamma-irradiation. The P. furiosus 2-Mb chromosome was fragmented into pieces ranging from 500 kb to shorter than 30 kb at a dose of 2,500 Gy and was fully restored upon incubation at 95 degrees C. We suggest that recombination repair could be an extremely active repair mechanism in P. furiosus and that it might be an important determinant of survival of hyperthermophiles at high temperatures.     

The strategy of edge wear prediction in CIM concept

A monitoring of tool wear in different cutting operations has been studied for many years. Special techniques have been used to detect a wear status basing upon cutting forces, acoustic emission, temperature, torque and power, vibration, noise and acceleration sensors. The adapting of a proper prediction method allows to solve problems of an automatic supervision in Computer Integrated Manufacturing systems. A task of the abrasive edge wear index prediction can be formulated as follows: disposing by the data collection of the edge wear status in a time period preceding the concerning the wear status in the successive time period embraced by the prediction method.     

The lattice dynamics of the Fe(tpa) (NCS)2 complex : light-induced excited spin state trapping effect

A light-induced excited spin state trapping (LIESST) experiment for a thermal gradual spin crossover complex, Fetris (2-pyridylmethyl) amine(NCS)2 or Fe(tpa) (NCS)2, was attempted for the first time. The high spin (HS) state after light inducement stayed metastable over a period of days without relaxation at 10 K. Intersystem relaxation from a high to a low spin (LS) complex occurred at 50 K after bleaching at 10 K. Investigation of the Mossbauer spectra of the LIESST and relaxation experiment indicated that the Debye–Waller factor was a correlation parameter of the HS fraction and that the co-operative effect played a role in the relaxation process for such a solid compound. This revised version was published online in November 2006 with corrections to the Cover Date.     

R-Calculus for ELP:An Operational Approach to Knowledge Base Maintenance

Sme concepts used in knowledge base maintenace,such as sequence,new law,user‘s rejection and reconstructions of a knowledge base,are first introduced,and then a framework for extended logic programming(ELP)is given,where an extended logic program is equivalent to a knowledge base.A transition system called R-calculus for ELP is provided.For a given knowledge base and a user‘s rejection,the R-calculus for ELP will deduce best revisions of the base.The soundness and the completeness of the R-calculus for ELP are proved,and the R-calculus for ELP is implemented in Prolog.In addition,the research is compared with other relevant work.     

Automatic tuning of decentralized PID controllers for MIMO processes

An automatic tuning algorithm for decentralized PID control in multiple-input multiple-output (MIMO) plants is presented. This algorithm generalizes the authors' recent auto-tuner for two-input two-output systems to any number of inputs and outputs. The algorithm consists of two stages. In the first, the desired critical point, which consists of the critical gains of all the loops and a critical frequency, is identified. The auto-tuner identifies the desired critical point with almost no a priori information about the process. During the identification phase all controllers are replaced by relays, thus generating limit cycles with the same period in all loops. It is shown that each limit cycle corresponds to a single critical point of the process. By varying the relays parameters different points can be determined. The auto-tuner contains a procedure which converges rapidly to the desired critical point while maintaining the amplitudes of the process variables as well as of the manipulated variables within prespecified ranges. In the second stage, the data of the desired critical point is used to tune the PID controllers by the Ziegler-Nichols rules or their modifications. This paper focuses on the first stage. The steady-state process gains, which are required for the appropriate choice of the desired critical point, are determined by the auto-tuner in closed-loop fashion simultaneously with the identification of the critical point. The identification of the process gains is achieved at no extra plant time. Based upon a large number of simulated cases, the proposed auto-tuner seems to be efficient and robust. The paper discusses the underlying principles of the auto-tuner and its properties and capabilities are demonstrated via examples.     

Muscle transformation of the sartorius muscle in a canine model: clinical impact for electrodynamic graciloplasty as a "neosphincter"

PURPOSE: Transformation of fast-twitching skeletal muscles to slow-twitching, slowly fatigable muscles has become of clinical interest in the recent past. Transposition and transformation of the gracilis muscle to use it as a substitute for a resected or defected anal sphincter (graciloplasty) have been reported as achieving promising results in the treatment of fecal incontinence caused by sphincter defects or following abdominoperineal anorectal excision for cancer. METHOD: This experimental study used a canine model and the sartorius muscle to evaluate the functional efficiency of two different configurations of the muscle loop to compare the presently applied transformation program (8 weeks) with a shorter (5 weeks) protocol. In six beagle dogs, both sartorius muscles were wrapped around two stomas, either in an alpha fashion or in the so-called split-sling technique. Muscle transformation was achieved by controlled neuromuscular stimulation either during eight (Program A) or five weeks (Program B). After completion of the transformation period, the function of the muscle slings was evaluated by manometry, and histomorphologic evaluation of the sartorius muscles was performed. RESULTS: It was shown that muscle transformation led to a slowly fatigable muscle that made it possible to perform continuos (tetanic) contraction, regardless of the configuration or the duration of the transformation. Median pressures created by these muscles also did not differ significantly. In accordance with these functional findings, the histologic evaluation showed the typical, significant increase of Type I fibers in both muscle slings and following both transformation protocols. Although the decrease of fast-twitching Type II fibers was more pronounced following the conventional (8 weeks) program, this finding did not influence the functional results. CONCLUSIONS: Results of our experiment indicate the possibility for using a shorter transformation protocol for transformation of the gracilis muscle during graciloplasty in the clinical setting. Furthermore, the efficacy and safety of the modified (split-sling) wrap technique was demonstrated.     

In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems

Particulate TiB₂ reinforced aluminum-based metal matrix composites (MMCs) were successfully fabricated by means of the reaction processing method. TiB₂ particulates were formed in situ through the reaction of Ti and B in Ti-Al-B, TiO₂ and B in TiO₂-Al-B, and TiO₂ and B₂O₃ in TiO₂-Al-B₂O₃ systems. The results showed that in situ TiB₂ particulates formed in the Ti-Al-B system had a size of 5 μm and they exhibited block and rodlike structures. Moreover, coarse Al₃Ti blocks several tens of micrometers in size were also formed simultaneously. On the other hand, equiaxed Al₂O₃ and TiB₂ particulates with a size of less than 2 μm were formed in situ in the TiO₂-Al-B and TiO₂-Al-B₂O₃ systems. The Al₃Ti phase was completely eliminated in the TiO₂-Al-B system with increasing B content. Tensile tests revealed that the Al₂O₃ · TiB₂/Al composite fabricated from the TiO₂-Al-B system exhibits excellent mechanical properties. The yield strength of the Al₂O₃ · TiB₂/Al composite appeared to increase with increasing TiB₂ content. The yield strength of the Al₂O₃ · TiB₂/Al composite could be further increased by introducing CuO into the TiO₂-Al-B system. Such an increment in mechanical strength arose from the strengthening effect caused by the Al₂Cu precipitates. The incorporation of CuO had no effect on the in situ reaction process of the TiO₂-Al-B system. Finally, the effect of SiC addition on the microstructure and mechanical properties of the composites fabricated from the TiO₂-Al-B and TiO₂-Al-B-CuO systems was also investigated.     

Antibody against synthetic rat PTH peptide (1-34) blocks PTH-mediated cAMP formation and phosphate transport in opossum kidney cells

The expression of the NMDA subtype of glutamate receptors was investigated by Western blot analysis and RT-PCR in cultured chick Bergmann and Müller glial cells. Using subunit-specific antibodies directed to the carboxy terminus of the rat NMDAR2A/B we detected the expression of the NMDAR2 subunit in both kinds of culture. The functional subunit of the NMDA receptor, NMDAR1, was detected by means of RT-PCR. These results, together with our previous functional characterization of NMDA receptors in radial glia, provide conclusive evidence for the expression of functional NMDA receptor/channels in Bergmann and Muller glia cells. Our findings strengthen the notion of a modulatory role of glial cells in synaptic transmission.