压缩机废油回收工艺小结

介绍了压缩机废油回收的原理、工艺及操作要点,达到了节油降耗的目的。     

以人为本的儿童医院候诊设施及服务系统的构建原则初探——以无锡儿童医院输液候诊区为例

旅游发展既促进了江南水乡传统建筑景观的保护,又对其产生了消极影响。旅游的消极影响表现在旅游容量对水乡建筑环境的压力,旅游的商业化、低俗化对建文章从以人为本(HCD)的设计理念出发,结合服务设计中接触点的分析方法,以无锡儿童医院输液候诊区为例,进行服务流程失败点的分析。提出以设计介入儿童医院候诊设施及服务系统构建的四大原则,旨在提升国内儿童医院候诊效率和服务水平,为新医疗服务模式提供案例参考。     

阿根廷工艺设计师马塞洛·卢西尼的本土意识

阿根廷首都布宜诺斯艾利斯被称为拉丁美洲的"巴黎",工艺设计师马塞洛·卢西尼的自创品牌airedelsur工作室就在这个美丽的城市。他的设计充分体现了在潘帕平原这片广袤的土地上,众多的民族文化和丰富的艺术气息。运用自己国家的民族特色来进行工艺设计,使设计师马塞洛·卢西尼的创作看起来既生动又独特。他的设计是现代与民族的完美结合,看似简洁大方,其实材料和制作的过程中包含的都是阿根廷本土的民族文化。这种本土文化运用在设计领域的成功案例给处在探索中的当代中国设计师以启发。     

一种新的S/PDIF接收机数据译码的实现方法

论文分析了S/PDIF音频数据流的特点,引入模式识别中的训练机对S/PDIF音频数据流进行现场脉冲宽度特征提取。依据训练机结果建立分类器实现脉冲宽度分类,根据脉冲宽度进行同步前置码和逻辑电平的解码。利用硬件描述语言Verilog进行设计实现与验证,仿真结果说明这种特征提取方法可以提高S/PDIF接收机数据解译码的适应性和准确性。     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

Fuel combustion test in constant volume combustion chamber with built-in adaptor

Combustion tests of pre-mixture of methane and air in constant volume combustion chamber(CVCC) have been carried out by means of flame propagation photo and gas pressure measurement,the effects of CVCC body temperature,intake pressure of pre-mixture of methane and air,equivalence ratio and location of the built-in adaptor have been investigated.The whole combustion chamber can be divided into two parts,i.e.the upper combustion chamber and the lower combustion chamber,by the built-in adaptor with through hol...     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

超低功耗智能监护报警器研究与设计

该文针对现有国内婴幼儿智能护理产品的优缺点,深入分析了如何防止睡觉受凉和尿床等问题,并对国外婴幼儿护理产品和婴幼儿护理理论进行了深入研究,设计了一种新型的智能化监护报警器。该报警器以低成本的松翰单片机为核心,采用纽扣电池供电,实现了超低功耗设计。实验表明,该装置集尿湿报警、走失报警、踢被报警、发烧报警和人工呼救多功能于一体,在具有使用安全、性能可靠、低功耗、报警及时、准确等优点的同时,还具有极好的性价比。     

Relationship of hydrocarbon and source-rock in Nos.3-5 tectonic belts of the Lenghu area, northern Qaidam Basin

Based on analyses of the components of crude oil hydrocarbons and carbon isotopes, the content of normal alkane de-creased from 49.00% to 20.10% when moving from the No.3 to No.5 tectonic belt of the Lenghu area of the Qaidam Basin, while cycloalkanes increased from 30.00% to 52.20% and aromatic and branch chain alkanes increased gradually as well. The maturity of sterane in crude oil is higher than that of its source-rock, which shows that the hydrocarbons were generated from a deep source-rock of high maturity around the tectonic belts of the Lenghu area. The analysis of the characteristics of carbon isotopes also shows that these isotopes of hydrocarbon compounds in the No.4 and No.5 tectonic belt are apparently heavier than those in the No.3 belt. The results of our research show that the hydrocarbons in the No.3 tectonic belt are mainly from a relatively rich sapropelic substance, while the hydrocarbons in the No.4 and No.5 tectonic belt originated mainly from organic matter of a rela-tively rich humic type substance.     

Relation between structural evolution of the Longmenshan orogenic zone and sedimentation of its foreland basin

In order to determine the area for oil and gas exploration in China's north Sichuan basin, we have divided the time during which the Longmenshan foreland basin was formed into five periods, based on the sedimentary response relationship of the fore-land basin to structural evolution: 1) a late Triassic Noric period; 2) an early-Middle Jurassic period; 3) a late Jurassic to early Cre-taceous period; 4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well, we analyzed the sedimen-tary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area, making it a major region for future oil and gas exploration in China's northern Sichuan basin.