不饱和聚醚醋酸酐酯化封端合成工艺的探讨

简单介绍了目前不饱和伯羟基聚醚封端的几种常用方法,讨论了最具可操性的工艺方案,即利用醋酸酐酯化封端工艺各因素对封端结果影响的问题,通过系列正交实验数据,得出最佳封端剂用量、反应温度及时间等工艺条件。     

CATALYTICALLY ACTIVE COMPONENTS OF Fe_2O_3-Sb_2O_4 MIXED OXIDE CATALYSTS AND THEIR ROLE IN AMMOXIDATION OF PROPYLENE

The catalytically active components of a series of Fe_2O_3-Sb_2O_4 mixed oxide catalysts with differentSb/Fe ratio,calcined at elevated temperature,as well as with or without support,have been investigated byX-ray diffraction analysis,Mossauer spectroscopy and XPS in order to elucidate their catalytic behavior inammoxidation of propylene.Correlations of acrylonitrile yield with Fe~2 and Fe~3 respectively showed that,FeSbO_4 seems to bethe basic active component of catalyst,upon which the formation of new phase containing Fe~3 is responsiblefor a good selective oxidation.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

火焰原子吸收光谱法测定硅粉中的铜

介绍了用火焰原子吸收法测定工业硅粉中微量铜的具体方法和过程，同时也给出了最佳实验条件。实验中采用新的样品处理方法，得到了令人满意的结果。其中样品回收率为99．8％—104．0%，相对标准偏差为0．31％—0.38％。本方法在实际应用过程中，简单、快速、     

钛酸铝材料性能及合成工艺

着重介绍了钛酸铝（Al2TiO3）陶瓷的结构、性能和合成工艺，并对今后发展趋势提出了基本观点。     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...     

Application of structural curvature of coalbed floor on CBM development in the Zaoyuan block of the southern Qinshui Basin

Based on controls of structural style and the position in coalbed methane(CBM)development,we used a method of curvatures to study its relations with CBM development parameters.We calculated structural curvatures of contours of the No.3coal seam floor of the Shanxi Formation in the Zaoyuan block of the Qinshui Basin and analyzed its relations with development parameters of coalbed methane wells.The results show that structural curvature is negatively related to coal reservoir pressure,while positively related to permeability.With an increase in structural curvature,the average production of coalbed methane wells increases at first and then decreases,reaching the highest production at 0.02 m-1 of structural curvature.Therefore,structural curvature can be an important index for potential evaluation of coalbed methane development and provide a basis for siting coalbed methane wells.     

2,4,6-三甲氧基脱氧安息香的合成新方法

以1,3,5-三甲氧基苯替代间苯三酚为原料和苯乙腈反应,用甲苯替代不易回收且安全性较差的乙醚为溶剂,通过Hoesch反应制备得到2,4,6-三甲氧基脱氧安息香,产品经HNMR和MS定性.因醚键的保护作用降低了羟基的反应活性,抑制了副反应,使得方法改进后,Hoesch反应的单步收率提高到81.3%.考察了原料配比、反应时间及ZnCl2用量对反应的影响,得到了较佳的反应条件为1,3,5-三甲氧基苯与苯乙腈的摩尔配比为1.2∶1,反应时间为28 h,ZnCl2与苯乙腈的摩尔配比为0.3∶1.     

6-PRRS并联机器人的动力学建模研究

为解决并联机器人动力学模型的计算复杂性与实时准确控制之间的矛盾,采用虚功原理建立6-PRRS并联机器人各构件随参数变化的完整动力学方程,对6-PRRS并联机器人动力学模型在各种工作情况下进行仿真分析,对机器人各部分质量和转动惯量对驱动力的影响进行研究,提出动力学模型简化策略,减小了动力学计算量,提高并联机器人动力学的计算速度,为并联机器人的控制和参数识别奠定了基础.