外加剂混凝土动态与静态坍落度损失的流变特性

本文对动、静态下混凝土坍落度损失的规律进行了研究,并从流变学的角度分析了外加剂对动、静态下混凝土坍落度损失的影响坍落度损失存在差别的原因.     

Total transfer capability computation for multi-area power systems

This paper presents a method for multi-area power system total transfer capability (TTC) computation. This computation takes into account the limits on the line flows, bus voltage magnitude, generator reactive power, voltage stability, as well as the loss of line contingencies. The multi-area TTC problem is solved by using a network decomposition approach based on REI-type network equivalents. Each area uses REI equivalents of external areas to compute its TTC via the continuation power flow (CPF). The choice and updating procedure for the continuation parameter employed by the CPF is implemented in a distributed but coordinated manner. The proposed method leads to potential gains in the computational efficiency with limited data exchanges between areas. The developed procedure is successfully applied to the three-area IEEE 118-bus test system. Numerical comparisons between the integrated and the proposed multi-area solutions are presented for validation.     

Monoalkyl Esters of Isoalkylphosphonic Acid as Extractants in Rare Earth Separation

Four monoalkyl esters of isoalkylphosphonic acids have been studied for the chromatographic separation ofrare earths (RE).The relationship between distribution ratios and acid concentration of the eluants forsamarium and ytterbium has been explored.The characteristics of these extractants loaded onto macroreticularpoly (methyl methacrylate) resin beads for the separation of lanthanum,cerium,praseodymium and neodymiumhave been compared.Among the extractants studied,mono(1-methylheptyl) ester of isooctylphosphonic acidwas found to be the best for RE separation.The acidity for separation is lower than any known P-containingextractants for the same purpose.For instance,with 1.73 mol·L~(-1) nitric acid as eluent,thulium,ytterbium andlutetium can be separated quantitatively.The extractant-loaded resins possess high column efficiency with goodkinetic characteristics.The extraction mechanism was also explored.     

广州市西村水厂生物预处理试验研究

介绍广州市西村水厂生物预处理试验研究,探讨用生物预处理工艺处理西村水厂现有原水的效果。试验结果表明生物预处理对改善西村水厂现有水源水质效果显著,"生物预处理 常规处理"后的最终出水的考察项目全部符合《生活饮用水卫生标准》。指出实施生物预处理工艺与西江引水工程相衔接,完全可以保障西村水厂的供水水质。     

Stability analysis of regional and national voting schemes by a continuous model

The previous discrete-model-based stability analysis of regional and national voting has been extended to a continuous-model-based analysis in the simultaneous presence of white and concentrated components of noise, reconfirming the previous conclusion that regional voting with smaller sized regions always demonstrates an improved stability over those with larger sized regions, including the national voting in its limiting case in particular. The conclusion remains valid as long as the weak distribution assumption is valid.     

Stability of Mixtoxantrone Hydrochloride in Solution

A stability-indicating reversed-phase high performance liquid chromatographic method was developed for the detection of mitoxantrone HC1 and its degradation products under accelerated degradation conditions. The degradation kinetics of mitoxantrone HC1 in aqueous solution over a pH range of 1.18 to 7.20 and its stability in propylene glycol-or polyethylene glycol 400-based solutions were investigated. The observed rate constants were shown to follow apparent first-order kinetics in all cases. The pH-rate profile shows that maximum stability of mitoxantrone HC1 was obtained at pH 4.01. No general acid or base catalysis from acetate or phosphate buffer species was observed. The catalysis rate constants on the protonated mitoxantrone imposed by hydrogen ion water and hydroxy ion were determined to be 3.72 × 10 min^-1 5.64 × 10-min^-1 and 1.108 × 10^-2min^-1, respectively. The degradation rate constants of mitoxantrone affected by different ionic strength systems. Irradiation with 254 nm UV light at 25±0.5°C was found when canpared with the light-protected controls. Incorporation of nonaqueous propylene glycol or polyethylene glycol in the pH 4.01 mitoxantrone solution shows an increase in its stability at 502±0.5°C.     

A segmentation-based lossless image coding method forhigh-resolution medical image compression

Lossless compression techniques are essential in archival and communication of medical images. Here, a new segmentation-based lossless image coding (SLIC) method is proposed, which is based on a simple but efficient region growing procedure. The embedded region growing procedure produces an adaptive scanning pattern for the image with the help of a very-few-bits-needed discontinuity index map. Along with this scanning pattern, an error image data part with a very small dynamic range is generated. Both the error image data and the discontinuity index map data parts are then encoded by the Joint Bi-level Image Experts Group (JBIG) method. The SLIC method resulted in, on the average, lossless compression to about 1.6 b/pixel from 8 b, and to about 2.9 b/pixel from 10 b with a database of ten high-resolution digitized chest and breast images. In comparison with direct coding by JBIG, Joint Photographic Experts Group (JPEG), hierarchical interpolation (HINT), and two-dimensional Burg prediction plus Huffman error coding methods, the SLIC method performed better by 4% to 28% on the database used