水溶性油墨用富马酸改性松香树脂的研制

介绍了一种水溶性富马酸改性松香树脂的制备方法 ,选取了较佳的工艺条件 ,本产品经国内几家油墨厂使用 ,结果表明适合水溶性油墨的应用要求     

磷钨酸乙醇染色法在嗜铬颗粒电镜X射线显微分析中的应用

通过比较常规透射电镜制样法、快速冷冻固定－冷冻超薄切片法及磷钨酸乙醇（EPTA）染色法在嗜铬颗粒透射电镜X射线显微分析中的应用，发现磷钨酸乙醇染色法能使嗜铬颗粒电子着色，从而较好地显示嗜铬颗粒的超微结构。同时磷钨酸乙醇染色法也以在一定程度上原位保留生物样品中元素，可以应用于检测样品元素含量的变化或比较样品元素含量的组间差别，提示磷钨酸乙醇染色法是一种可应用于透射电镜X射线显微分析的经济简便的生物样品制备方法。     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

标识化语言的发展及在电子物流中的应用

重点阐述了XML技术的发展和对EDI技术的有效补充与改进，并展望基于XML技术的电子商务物流数据交换技术的发展前景。     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

A random switching method for HPWM full-bridge inverter

To overcome the problem of unequal switching loss in power switches, in conventional hybrid pulse width modulation (HPWM) full-bridge inverters, a random switching method for HPWM full-bridge inverters is proposed. The proposed method equalizes switching losses of the four switches, while also providing good output performance     

储层敏感性快速预测软件在大港油田的研究与应用

在储层特征分析，室内实验，机理研究的基础上，利用人工神经BP网络建立预测模型，并编制了预测储层5种敏感性的软件，该软件受人为因素干扰小，所需参数少，准确度高，综合符合率大于80％现场应用结果表明，该技术能为制定保护油气层技术措施提供较可靠的依据，能提高油田滚动开发效益，改善老油田的开发效果，该软件对BP算法进行了改进，（1）从两方面入手使网络摆脱平坦区，一是对输入数据进行归一化处理，使O1的取值在[0,1]之间，二是一旦网络陷入平坦区域，局部极小，使连接权值Wkj,Wji和阈值Qk,Qj同时缩小一个因子，λ＞1，可使Ok(1-Ok)脱离零值，离开平坦区；（2）加速收敛，方法有自动调整学习因子，添加动量项以及对权值进行批处理，用BP算法预测储层潜在敏感性，首先应确定影响储层敏感性的主要因素，然后根据这些因素有针对性地收集有关资料并进行处理，再根据敏感性预测的要求，设计相应的网络结构进行训练，最后对训练好的网络进行.检验。     

等偏移距自动初至静校正

茅金根 ,梁秀文 ,杨午阳 ,冯有奎 .等偏移距自动初至静校正 .石油地球物理勘探 ,2 0 0 2 ,37(5 ) :4 6 9～ 4 72　　本文提出一种自动计算静校正量的新方法。它首先在等偏移距道集内对相邻道的初至波采用高精度相关构建一个关于炮、检时差的超大矩阵方程 ,然后采用优化统计迭代算法求解炮点和检波点的静校正量 ,并用概率分布函数确定精确的炮、检静校正量 ,最后用误差校正函数消除炮、检静校正误差。实际资料处理结果表明 ,本方法自动、省时、精度高。     

浅谈水利枢纽道路工程建设中的几个问题及其对策

从水利枢纽工程建设的实际出发,分析了枢纽道路建设中的几个值得考虑的基本问题。针对永久性道路的建设环境和建筑特点以及临时性道路的复杂性和多样性,提出了永久性道路和临时性道路建设的基本对策。基于高新技术材料HEC作为道路建筑胶凝材料的实际工程应用,在道路结构布局观念、设计思想、建筑选材和施工工艺及其技术经济性能比等方面提出了枢纽道路工程建设的实施方案,其有效性和可推广性在水布垭道路工程建设中得到了印证。     

CCD型束流截面探测器

CCD型束流截面探测器的主要特点是使用电荷耦合器件做传感器,用束流同步光中的可见光成份做为信号源。该探测器同时具有模拟量和数字量两种输出,工作周期短,速度高,不影响束团粒子寿命,在电子储存环物理运行中,是一种有效的探测设备。