Nucleotide-Driven Molecular Sensing of Monkeypox Virus Through Hierarchical Self-Assembly of 2D Hafnium Disulfide Nanoplatelets and Gold Nanospheres

Liquid interfaces facilitate the organization of nanometer-scale biomaterials with plasmonic properties suitable for molecular diagnostics. Using hierarchical assemblage of 2D hafnium disulfide nanoplatelets and zero-dimensional spherical gold nanoparticles, the design of a multifunctional material is reported. When the target analyte is present, the nanocomposites’ self-assembling pattern changes, altering their plasmonic response. Using monkeypox virus (MPXV) as an example, the findings reveal that adding genomic DNA to the nanocomposite surface increases the agglomeration between gold nanoparticles and decreases the π-stacking distance between hafnium disulfide nanoplatelets. Further, this self-assembled nanomaterial is found to have minimal cross-reactivity toward other pathogens and a limit of detection of 7.6 pg µL⁻¹ (i.e., 3.57 × 10⁴ copies µL⁻¹) toward MPXV. Overall, this study helped to gain a better understanding of the genomic organization of MPXV to chemically design and develop targeted nucleotides. The study has been validated by UV–vis spectroscopy, X-ray diffraction, scanning transmission electron microscopy, surface-enhanced Raman microscopy and electromagnetic simulation studies. To the best knowledge, this is the first study in literature reporting selective molecular detection of MPXV within a few minutes and without the use of any high-end instrumental techniques like polymerase chain reactions.     

Sunlight-proof optical distance measurements with a dual-line lock-in time-of-flight sensor

This work describes time-of-flight distance measurements with a line sensor based on the correlation principle. It is capable of suppressing maximum bright sunlight and even more electronically in each pixel autonomously without using any optical filters. The optical fill factor of a pixel is 58% embodying a 100 × 100 μm2 photodiode. Working principle of the pixel circuit and the mechanism for suppression of ambient illumination as well as physical limitation of accuracy are discussed. Characterizations of the single-pixel performance with 650 nm laser and 850 nm LED sources with optical output powers of 1 mW and 900 mW, respectively, are presented. Finally, measured characteristics of the line sensor for distances up to 3.2 m are shown. The standard deviation is below 2 cm up to 1.2 m at a measurement time of 50 ms per distance point and the near-infrared LED illumination.     

Microfluidic deans switch for comprehensive two-dimensional gas chromatography

A microfluidic Deans switch was used as a comprehensive two-dimensional gas chromatography (GCxGC) modulator. The simplicity and wide temperature range of the Deans switch make it a promising alternative to existing modulation techniques. However, the Deans switch is a low duty cycle modulator; that is, it samples only a small portion of the primary column effluent. Like all low duty cycle modulators, the Deans switch produces inconsistent transfer of components from the primary to the secondary column if the primary peaks are undersampled. Theoretical simulations and experimental studies show that the relative standard deviation (RSD) of the fraction of material transferred from the primary column to the secondary column is less than 1% if the modulation ratio is greater than 2.5. But the RSDs increase rapidly as the modulation ratio is decreased below 2.5. Deans switch GCxGC was validated by analyzing the aromatic content of gasoline. A fast analysis (<10 min) produced narrow primary peaks and a modulation ratio of 1.7. The quantitative results were in good agreement with results obtained with differential flow modulation GCxGC and GC/MS, but the RSDs of single-component levels were approximately three times greater. The Deans switch modulator was also used for a slower gasoline analysis (33 min run time) that produced modulation ratios near 5. In this case, the quantitative results and RSDs were in excellent agreement with the differential flow GCxGC and GC/MS results. These studies demonstrate that a Deans switch can be an effective modulator provided that modulation ratios greater than approximately 2.5 are employed.     

Contour superresolved imaging of static ground targets using satellite platform

We propose a method for increasing the contour resolution of static ground targets and to overcome the diffraction limit of an optical system installed on top of a satellite. The resolution improvement is obtained by using a sequence of low-resolution images taken from different angles realized by the movement of the satellite platform. The superresolving process is obtained by the generation of relative movement between the inspected object and the a priori known high-resolution background. The relative movement is caused because the images are taken from different angles. The captured set of low-resolution images are decoded by the a priori known high-resolution background obtained from a set of reference images taken only once by a high-resolution camera. The proposed concept is demonstrated via Matlab simulation and laboratory experiments.     

The impact of Ontario's extended drinking hours on cross-border cities of Windsor and Detroit

PURPOSE: This study evaluated the cross-border safety impact of extended drinking hours from 1:00 to 2:00 a.m., in licensed establishments in Ontario, Canada. METHODS: This study examined patterns in total and alcohol-related casualties in: (1) Windsor, Ontario, Canada compared to Detroit, Michigan, US with a 2:00 a.m. closing time, and (2) Ontario compared to Michigan for overall trends. The criterion outcome indicators were: (1) monthly motor vehicle casualties (major injuries and fatalities) for the city-regions of Windsor and Detroit and (2) Ontario and Michigan monthly motor vehicle fatalities occurring between 11:00 p.m. and 3:00 a.m. for 4 years pre- and 3 years post-policy change. In order to examine cross-border drinking consequences, data were disaggregated to assess trends of motor vehicle injury collisions involving vehicles with US licence plates and with US drivers aged 16-20 in the Windsor region; similarly trends were assessed for motor vehicle injury collisions involving vehicles with Ontario licence plates in the Detroit region. RESULTS: The Windsor region total motor vehicle casualty data showed a non-significant pre-post increase, while the Detroit region showed a statistically significant decrease for total motor vehicle casualties. In the Windsor region, a significant increase was found for alcohol-related motor vehicle casualties after the drinking hours were extended. However, the Detroit region showed a statistically significant decrease in alcohol-related motor vehicle casualties concomitant with Ontario's drinking hour extension. No similar trends were found for the province of Ontario and the state of Michigan as a whole. Moreover, a significant decrease was found for injury collisions involving vehicles with Ontario licence plates in the Detroit region but no similar pattern was found for injury collisions involving vehicles with US licence plates and with 16-20-year-old US drivers in the Windsor region. DISCUSSION: These data seem to support a cross-border impact of the Ontario extended drinking policy. A significant increase in alcohol-related motor vehicle casualties was found in the Windsor region and concomitantly, significant decreases in total and alcohol-related motor vehicle casualties were found in the Detroit region after the extended drinking hours amendment. The Ontario government's belief that the extended drinking hour policy would "reduce the number of patrons who cross the border when Ontario's bars and restaurants close" may have been realized.     

Basic considerations and topologies of switched-mode assistedlinear power amplifiers

This paper presents a combined power amplifier system consisting of a linear amplifier unit with a switched-mode (class D) current dumping stage arranged in parallel. With this topology, the fundamental drawback of conventional linear power amplifiers-the high loss-is avoided. Compared to a pure class D (switching) amplifier, the presented system needs no output filter to reduce the switching frequency harmonics. This filter (usually of multistage type) generally deteriorates the transient response of the system and impairs the feedback loop design. Furthermore, the low-frequency distortions of switching amplifiers caused by the interlock delay of their power transistors are avoided with the presented switched-mode assisted linear amplifier system. This can be considered as a master-slave system with a guiding linear amplifier and a supporting class D slave unit. The paper describes the operating principle of the system, analyzes the fundamental relationships for the circuit design, and presents simulation results. Finally, various further topologies of switched-mode assisted linear amplifiers are given     

Clinical features of major depressive disorder in adolescents and their relatives: Impact on familial aggregation, implications for phenotype definition, and specificity of transmission.

Three questions were addressed using family study data from a community sample: (a) Which clinical features of major depressive disorder (MDD) in adolescents are associated with elevated rates of MDD in relatives? (b) Which features of MDD in relatives distinguish family members of depressed adolescents from relatives of adolescents without mood disorders (NMD)? and (c) Do depressed adolescents with particular features have higher proportions of depressed relatives with the same features? Participants included 268 MDD adolescents, 401 NMD adolescents, and their 2,202 first-degree relatives. Rates of MDD were highest among relatives of depressed adolescents with recurrent episodes and greater impairment. Depression severity best distinguished the relatives of depressed adolescents from relatives of controls. Specific clinical features did not aggregate in families. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The synthesis and absorption of pantothenic acid in the gastrointestinal tract of the adult sheep

A microbiological assay using Lactobacillus plantarum was used to determine the levels of pantothenic acid (PA) in food and digesta samples from sheep fitted with duodenal and ileal re-entrant cannulas, given a variety of diets. ACP-bound PA was not measured. With most of the diets studied there was an increase in ‘total’ PA and CoA-bound PA before the small intestine. Both the increase in CoA-bound PA prior to the duodenum and the ‘total’ PA reaching the duodenum were positively and significantly related to the microbial dry matter synthesised in the rumen. Free PA at the duodenum was significantly related to the dietary intake of free PA. The apparrent absorption of total PA within the small intestine was significantly related to the quantity entering the small intestine suggesting a passive absorption mechanism. It is suggested that CoA-bound PA entering the small intestine is hydrolysed to release free PA which is then available for absorption.     

Tricalcium phosphate based resorbable ceramics: Influence of NaF and CaO addition

Resorbable bioceramics have gained much attention due to their time-varying mechanical properties in-vivo. Implanted ceramics degrade allowing bone in-growth and eventual replacement of the artificial material with natural tissue. Calcium phosphate based materials have caught the most significant attention because of their excellent biocompatibility and compositional similarities to natural bone. Doping these ceramics with various metal ions has significantly influenced their properties. In this study, tricalcium phosphate (TCP) compacts were fabricated via uniaxial compression with five compositions: (i) pure TCP, (ii) TCP with 2.0 wt.% NaF, (iii) TCP with 3.0 wt.% CaO, (iv) TCP with a binary of 2.0 wt.% NaF and 0.5 wt.% Ag₂O, and (v) TCP with a quaternary of 1.0 wt.% TiO₂, 0.5 wt.% Ag₂O, 2.0 wt.% NaF, and 3.0 wt.% CaO. These compacts were sintered at 1250 °C for 4 h to obtain dense ceramic structures. Phase analyses were carried out using X-ray diffraction. The presence of NaF in TCP improved densification and increased compression strength from 70 (± 25) to 130 (± 40) MPa. Addition of CaO had no influence on density or strength. Human osteoblast cell growth behavior was studied using an osteoprecursor cell line (OPC 1) to assure that the biocompatibility of these ceramics was not altered due to the dopants. For long-term biodegradation studies, density, weight change, surface microstructure, and uniaxial compression strength were measured as a function of time in a simulated body fluid (SBF). Weight gain in SBF correlated strongly with precipitation viewed in the inter-connected pores of the samples. After 3 months in SBF, all samples displayed a reduction in strength. NaF, CaO and the quaternary compositions maintained the most steady strength loss under SBF.     

Electroplate and lift lithography for patterned micro/nanowires using ultrananocrystalline diamond (UNCD) as a reusable template

A fast, simple, scalable technique is described for the controlled, solution-based, electrochemical synthesis of patterned metallic and semiconducting nanowires from reusable, nonsacrificial, ultrananocrystalline diamond (UNCD) templates. This enables the repeated fabrication of arrays of complex patterns of nanowires, potentially made of any electrochemically depositable material. Unlike all other methods of patterning nanowires, this benchtop technique quickly mass-produces patterned nanowires whose diameters are not predefined by the template, without requiring intervening vacuum or clean room processing. This technique opens a pathway for studying nanoscale phenomena with minimal equipment, allowing the process-scale development of a new generation of nanowire-based devices.