Adhesion kinetics of viable Cryptosporidium parvum oocysts to quartz surfaces

The transport and deposition (adhesion) kinetics of viable Cryptosporidium parvum oocysts onto ultrapure quartz surfaces in a radial stagnation point flow system were investigated. Utilizing an optical microscope and an image-capturing device enabled real time observation of oocyst deposition behavior onto the quartz surface in solutions containing either monovalent (KCl) or divalent (CaCl2) salts. Results showed a significantly lower oocyst deposition rate in the presence of a monovalent salt compared to a divalent salt. With a monovalent salt, oocyst deposition rates and corresponding attachment efficiencies were relatively low, even at high KCl concentrations where Derjaguin-Landau-Verwey-Overbeek (DLVO) theory predicts the absence of an electrostatic energy barrier. On the other hand, in the presence of a divalent salt, oocyst deposition rates increased continuously as the salt concentration was increased over the entire range of ionic strengths investigated. The unusually low deposition rate in a monovalent salt solution is attributed to "electrosteric" repulsion between the Cryptosporidium oocyst and the quartz surface, most likely due to proteins on the oocyst surface that extend into the solution. It is further proposed that specific binding of calcium ions to the oocyst surface functional groups results in charge neutralization and conformational changes of surface proteins that significantly reduce electrosteric repulsion.     

Fuzzy Analysis of Slope-Area Discharge Estimates

When velocity estimates of channel flows are not available, the slope-area method is widely used to make discharge estimates. The accuracy of such estimates depends on many factors but is generally believed to be low. In this study, fuzzy set analyses were used to compute the distribution of slope-area discharge estimates, with the distribution very similar to that assessed using statistical methods used in hydrology. The effects of errors in channel roughness, channel width, channel side-slopes, and flow depth on the accuracy of discharges were assessed. The large errors possible in channel roughness are a primary source of error in discharge estimates. Channel incision and vegetal growth are shown to significantly influence the accuracy of slope-area discharge estimates and the length of time before a slope-area rating curve should be recalculated. Records as short as 10 years can be seriously biased due to a failure to account for the effects of incision or vegetal growth.     

Wavelet-based feature extraction from oceanographic images

Features in satellite images of the oceans often have weak edges. These images also have a significant amount of noise, which is either due to the clouds or atmospheric humidity. The presence of noise compounds the problems associated with the detection of features, as the use of any traditional noise removal technique will also result in the removal of weak edges. Recently, there have been rapid advances in image processing as a result of the development of the mathematical theory of wavelet transforms. This theory led to multifrequency channel decomposition of images, which further led to the evolution of important algorithms for the reconstruction of images at various resolutions from the decompositions. The possibility of analyzing images at various resolutions can be useful not only in the suppression of noise, but also in the detection of fine features and their classification. This paper presents a new computational scheme based on multiresolution decomposition for extracting the features of interest from the oceanographic images by suppressing the noise. The multiresolution analysis from the median presented by Starck-Murtagh-Bijaoui (1994) is used for the noise suppression     

The Pole Term in Linear Response Theory: An Example From the Transverse Response of the Electron Gas

In linear response theory, the dielectric response at zero frequency sometimes appears to violate the f-sum rule, which has apparent implications for causality. Here, we study the origin of this apparent discrepancy, focusing on Lindhard’s formula for the transverse response of the electron gas. At non-zero frequency, first-order poles contribute to the imaginary part of the dielectric function in the usual way. At zero frequency, second-order poles contribute in a way which forces a careful consideration of the notation of summation and integration to avoid an error. A compact formula for the contribution of the second-order poles is presented. The sense in which the f-sum rule is satisfied is discussed.     

Automatic vigilance for negative words in lexical decision and naming: Comment on Larsen, Mercer, and Balota (2006).

An automatic vigilance hypothesis states that humans preferentially attend to negative stimuli, and this attention to negative valence disrupts the processing of other stimulus properties. Thus, negative words typically elicit slower color naming, word naming, and lexical decisions than neutral or positive words. Larsen, Mercer, and Balota (see record 2006-04603-006) analyzed the stimuli from 32 published studies, and they found that word valence was confounded with several lexical factors known to affect word recognition. Indeed, with these lexical factors covaried out, Larsen et al. found no evidence of automatic vigilance. The authors report a more sensitive analysis of 1011 words. Results revealed a small but reliable valence effect, such that negative words (e.g., "shark") elicit slower lexical decisions and naming than positive words (e.g., "beach"). Moreover, the relation between valence and recognition was categorical rather than linear; the extremity of a word's valence did not affect its recognition. This valence effect was not attributable to word length, frequency, orthographic neighborhood size, contextual diversity, first phoneme, or arousal. Thus, the present analysis provides the most powerful demonstration of automatic vigilance to date. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Angiotensin III-induced dipsogenic and pressor responses in rodents.

Three experiments examined responses to angiotensins in 64 male Sprague-Dawley rats, 64 male Mongolian gerbils, and 40 Octodon degus—a South American rodent. In Exp I, injections of [des-Asp–1]-angiotensin I ([des-Asp–1]-AI), angiotensin II (AII), and angiotensin III (AIII), at doses of .001–2 mg/kg (sc), induced drinking in the rat and degus, but not in the gerbil. In Exp II, pretreatment with captopril (50 mg/kg), an angiotensin converting enzyme inhibitor, prevented the endogenous conversion of sc injected [des-Asp–1]-AI to AIII and prevented drinking in rats and degus. The pharmacological artifact of hypovolemia caused by angiotensin-induced increases in vascular permeability was not observed in members of these species. In Exp III, blood pressure changes resulting from injections of AII and AIII in rats and gerbils were measured. Significant pressor elevations were seen following the administration of both analogs, although AII was more potent. Results demonstrate that AIII is dipsogenic in rats and degus and serves as a pressor agent in rats and gerbils. No explanation was found for the gerbil's relative lack of dipsogenicity to the presently tested angiotensins. (54 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Physiology and ecology of bacteriophages of the marine bacterium Beneckea natriegens: salinity

The effects of variation in ionic levels on the stability and replication of two bacteriophages (nt-1 and nt-6) host specific for the marine bacterium Beneckea natriegens were examined. Monovalent cations influenced the adsorption of the nt-1 but not the nt-6 phage; however, one-step growth studies showed that NaCl was required for replication of both phage. The NaCl optimum for nt-1 production was 0.25 M NaCl, the same as the growth optimum for B. natriegens. However, the optimum for nt-6 production was 0.16 M NaCl. These NaCl optima for host and phage are at estuarine rather than oceanic levels. The nt-1 phage was better suited to replicate at NaCl levels typical of higher salinity areas (18-35%) and the nt-6 phage was better suited to replicate at lower salinities (5-18%). The nt phage were more resistant to low NaCl levels than their host bacterium and appeared limited to marine waters by the lower survival salinity of B. natriegens coupled with phage inactivation processes occurring in natural estuarine waters.     

Experimental intravitreal gentamicin

Rabbits received intravitreal injections of gentamicin and indirect ophthalmoscopy, electroretinography, and histopathology determined relative toxicity. An intravitreal dose of 0.1 to 0.2 mg of commercially available gentamicin was well tolerated in the rabbit eye. A dosage of 0.4 mg or higher consistently produced significant ocular toxicity as evidenced by extinction of the electroretinogram, gross fundus changes, and histopathologic alterations.     

Hydrophobicity, adhesion, and friction properties of nanopatterned polymers and scale dependence for micro- and nanoelectromechanical systems

Applications in micro/nanoelectromechanical systems generally require low adhesion and friction values between two materials of interest. By alteration of the material combinations and surface roughness, including nanopatterning, adhesion and friction can be tailored to meet a specific requirement. Surfaces found in nature, such as hydrophobic lotus leaves, provide a good example of this optimization. Recent models of hydrophobic leaf surfaces show a correlation between roughness and hydrophobicity, which can be mimicked by the presence of nanopatterned asperities on a polymer surface. In addition, by introducing nanopatterns on the polymer surface, the real area of contact decreases when another surface comes into contact with the patterned surface, which reduces adhesion and friction. This study explores the effect of nanopatterning on hydrophobicity, adhesion, and friction for two different hydrophilic polymers, poly(methyl methacrylate) (PMMA) and polyurethane acrylate (MINS), with two types of patterned asperities, low aspect ratio and high aspect ratio, investigated by use of an atomic/friction force microscope (AFM/FFM). In addition to the polymers, a hydrophobic coating was deposited on the surface of the patterned PMMA to study the effect of roughness on the contact angle, along with adhesion and friction. Relative contribution due to change in contact angle and real area of contact are explored. Scale dependence on adhesion and friction was also studied using AFM tips of various radii. Since applications of these surfaces will require operation in varying environments, the effect of relative humidity is investigated.