Probiotic yoghurt functionalised with microalgae and Zedo gum: chemical,microbiological, rheological and sensory characteristics

In this study, using a central composite design, the effects of addition of Spirulina platensis and Zedo gum to plain and probiotic yoghurt samples were investigated during storage. Lactobacillus paracasei proliferation was directly dependent on the addition of microalgae and was inversely affected by storage time. Probiotic samples containing S. platensis showed the highest antioxidative activity. Maximum stability was obtained at higher amounts of Zedo gum, while organoleptic and rheological attributes improved at 0.25% Zedo gum. Given the importance of probiotic viability, supplementation of probiotic yoghurt with Zedo gum/S. platensis may be consideredas a novel nutraceutical formulation.     

Optical and structural properties of sol-gel derived nanostructured CeO2 film

Sol-gel derived nanostructured CeO2 film was deposited on glass substrate using by dip-coating technique with annealing at 65℃.X-ray diffraction (XRD),scanning electron microscopy (SEM),Fourier transform infrared (FTIR),UV/vis and photoluminescence (PL) spectroscopy studies were employed to analyze the structural and optical properties of the sol-gel derived nanostructured CeO2 film.The average crystallite size was estimated from the XRD pattern using by Scherrer equation as about 3-4nm.An SEM micrograph shows that the film was porous in nature and crack free.The UV-visible absorption spectroscopic measurement results showed that the products had conspicuous quantum size effects.The absorption spectrum indicates that the sol-gel derived nanostructured CeO2 film has a direct bandgap of 3.23 eV and the photoluminescence spectra of the film show a strong band at 378 nm:it may have a promising application as an optoelectronic material.     

Inorganic-organic phase arrangement as a factor affecting gas-phase desulfurization on catalytic carbonaceous adsorbents

Dried sewage sludge was physically mixed with waste paper (paper-to-sludge ratios from 25% to 75%). To increase the catalytic activity, from 1% to 6% calcium hydroxide was added to the mixtures. Then the precursors were carbonized at 950 degrees C. The performance of materials as H2S adsorbents was tested using a home-developed dynamic breakthrough test. The samples, before and after the adsorption process, were characterized by adsorption of nitrogen, potentiometric titration, thermal analysis, XRF, and SEM. Differences in the performance were linked to the surface properties. Itwas found that mixing paper with sludge increases the amount of H2S adsorbed/oxidized in comparison with that adsorbed/oxidized by the adsorbents obtained from pure precursors (sludge or waste paper) and the capacity is comparable to those of the best activated carbons existing on the market. Although both sewage sludge and waste paper provide the catalytic centers for hydrogen sulfide oxidation, the dispersion of the catalyst and its location within accessible pores is an important factor. The presence of cellulose in the precursor mixture leads to the formation of a light macroporous char whose particles physically separate the inorganic catalytic phase of the sewage sludge origin, decreasing the density of the adsorbent and thus providing more space for storage of oxidation products. This, along with calcium, contributes to a significant increase in the capacity of the materials as hydrogen sulfide adsorbents. On their surface about 30 wt % H2S can be adsorbed, mainly as elemental sulfur or sulfates. The results demonstrate the importance of the composition and arrangement of inorganic/ organic phases for the removal of hydrogen sulfide. The interesting finding is that although some microporosity is necessary to increase the storage area for oxidation products, the carbonaceous phase does not need to be highly microporous. It is important that it provides space for deposition of sulfur, which is formed on the inorganic-phase catalyst. That space can be in meso- and macropores as shown in the case of char derived from the waste paper.     

Synthesis,Thermal Properties and Electrical Conductivity of Na-Sialate Geopolymer

This work aims to study the thermal behavior of basic-geopolymers derived from metakaolin (clay). The geopolymers were characterized by different techniques: thermal analysis (DTA, TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and impedance spectroscopy. Some physicochemical properties of the products were also determined: the phases obtained after geopolymer heat treatment and their electrical properties. The results obtained after drying and heat treatment showed that the products kept their initial shapes, but revealed variable colors depending on the temperatures at which they were treated. The products obtained are amorphous between 300 up to 600 °C with peaks relating to the presence of nanocrystallites of muscovites and zeolite, thus at 900 °C it is quite amorphous but only contains nanocrystallites of muscovites. From the temperature of 950 °C, we notice that the geopolymer has been transformed into a crystalline compound predominated by the Nepheline (NaAlSiO₄) with the presence of a crystalline phase by minor peaks of Muscovite, this crystalline character has been increased at 1100 °C to obtain a whole phase crystalline of a Nepheline. The treatment of this geopolymer for one hour at 1200 °C shows an amorphous phase again corresponding to corundum (α-Al₂O₃). This indicates that the dissolution of the grains by the liquid phase induces the conversion of the material structure from sialate [–Si–O–Al–O] to sialate siloxo [–Si–O–Al–O–Si–O–] and the formation of a new crystalline phase (α-Al₂O₃). This development of sialate to sialate-siloxo was confirmed by IR spectroscopy. As mentioned above, from 300 to 900 °C, Na-sialate geopolymer exhibits the same disorder structure of nepheline. The crystal structure of nepheline is characterized by layers of six-membered tetrahedral rings of exclusively oval conformation. The rings are built by Regularly alternating tetrahedral AlO₄ and SiO₄. Stacking the layer’s parallel to the c axis gives a three-dimensional network containing channels occupied by Na cations. This topology favors easy movement of Na⁺ ions throughout the structure. For this reason, ionic migration in nepheline is widely reported. The refinement of Na-Sialate geopolymer at room temperature gives bulk high ionic conductivity of about 5 × 10^?5 S cm^?1 and this is due to the probable joint contribution of H⁺ and Na⁺ ions. Above 200 °C, Na⁺ seems to remain the only charge carrier with a low activation energy of about Ea?=?0.26 eV. At higher temperatures, the characteristic frequencies become so close that it is impossible to distinguish the contributions. A total resistance comprising both grain and grain boundaries contribution is then determined.

     

Optimization of a continuous ultrasound assisted oxidative desulfurization (UAOD) process of diesel using response surface methodology (RSM) considering operating cost

A continuous-flow ultrasound-assisted oxidative desulfurization(UAOD) of partially hydro-treated diesel has been investigated using hydrogen peroxide-formic acid as simple and easy to apply oxidation system. The effects of different operating parameters of oxidation stage including residence time(2–24 min), formic acid to sulfur molar ratio(10–150), and oxidant to sulfur molar ratio(5–35) on the sulfur removal have been studied using response surface methodology(RSM) based on Box–Behnken design. Considering the operating costs of the continuous-flow oxidation stage including chemical and electrical energy consumption, the appropriate values of operating parameters were selected as follows: residence time of 16 min, the formic acid to sulfur molar ratio of 54.47, and the oxidant to sulfur molar ratio of 8.24. In these conditions, the sulfur removal and the volume ratio of the hydrocarbon phase to the aqueous phase were 86.90% and 4.34, respectively. By drastic reduction in the chemical consumption in the oxidation stage, the volume ratio of the hydrocarbon phase to the aqueous phase was increased up to 10. Therefore, the formic acid to sulfur molar ratio and the oxidant to sulfur molar ratio were obtained 23.64 and 3.58, respectively, which lead to sulfur removal of 84.38% with considerable improvements on the operating cost of oxidation stage in comparison with the previous works.     

An Insight View on Synthetic Protocol,Surface Activity,and Biological Aspects of Novel Biocompatible Quaternary Ammonium Cationic Gemini Surfactants

In this study, we prepared a novel series of diester-functionalized cationic gemini surfactants (C_m-E2O2-C_m) containing ethylene oxide as a spacer with varying alkyl chain lengths and characterized by ¹H NMR, FT-IR, elemental analysis, and ESI-MS. The physicochemical properties of the geminis were explored by tensiometry, fluorescence, dye solubilization, and Krafft point. These geminis acquire superior surface activity than the conventional surfactants. Fluorescence spectroscopy analysis affirmed that the micropolarity and aggregation number of micelles diminished with increase in the alkyl chain length. These geminis represent a new group of amphiphiles of considerably high biodegradability, better cleavability, and low toxicity as assessed by BOD test, FT-IR analysis, and HC₅₀ analysis, respectively. They also showed significant level of antimicrobial activity toward some specified bacterial strains of Gram-positive and Gram-negative by using agar well diffusion method. Furthermore, the thermogravimetric analysis provided information regarding thermal stabilities of the newly synthesized gemini surfactants.     

Nanoraspberry-like palladium/spongy nickel oxide for electrooxidation of five light fuels

The spongy nickel oxide (SNO) was synthesized the solution combustion method. The SNO was selected as a promoter to boost the catalytic activity of nanoraspberry-like palladium (NRPd) toward electrooxidation of five light fuels (LFs): methanol, ethanol, formaldehyde, formic acid, and ethylene glycol. The X-ray powder diffraction, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy, and field emission scanning electron microscope techniques were used for the materials characterization. In comparison with nonpromoted Pd, the NRPd-SNO electrocatalyst shown an excellent efficiency in parameters like the electrochemical active surface area and anti-CO poisoning behavior. The turnover data and the parameters, including reaction order, activation energy, and the coefficients of electron transfer and diffusion, were evaluated for the each process of LFs electrooxidation. The outcome for NRPd-SNO activity toward LFs electrooxidation was compared to some reported electrodes. The SNO increases the removal of intermediates created in the oxidation of LFs that can poison the surface of palladium catalyst. This is due to the presence of the lattice oxygens in SNO structure and Ni switching between its high and low valances. The compatibility of the adsorption process of LFs on the surface of the NRPd-SNO catalyst with different isotherms was determined by studying the Tafel polarization and calculating the surface coverage.     

Assessment of in vitro antioxidant, antibacterial and immune activation potentials of aqueous and ethanol extracts of Phyllanthus niruri

BACKGROUND: Recently much attention has been paid to biologically active plants because of their low production cost and fewer adverse effects compared with chemical drugs. In the present investigation the bioactivity of Phyllanthus niruri ethanol and aqueous extracts was evaluated in vitro. RESULTS: The ethanol extract of P. niruri showed a high level of flavonoid content (123.9 ± 0.002 mg g^?1), while the aqueous extract showed the highest 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH; IC₅₀6.85 ± 1.80 µmol L^?1) and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS; 46.44 ± 0.53 µmol L^?1) free radical scavenging activities with high phenol content (376 ± 0.02 mg g^?1) and elevated levels of ferric reducing antioxidant power (FRAP; 23 883 ± 0.019 mmol g^?1) with excellent antibacterial activity against Staphylococcus aureus (20 mm inhibition zone) and Streptococcus agalactiae (12 mm inhibition zone), respectively, in addition to the best immune activation potential of human peripheral blood mononuclear cells (450.5%). CONCLUSIONS: It is clear from our results that both extracts of P. niruri has excellent bioactivity roles via elevated levels of antibacterial, antioxidant and percentage of peripheral blood mononuclear cell proliferation, which could lead to the development of medications for clinical use. Copyright © 2012 Society of Chemical Industry     

Comparison of pH-dependent sonodisruption of re-assembled casein micelles by 35 and 130 kHz ultrasounds

Sonodisruption behavior of re-assembled casein micelles was compared at two ultrasound frequencies (35 and 130 kHz) by turbidity measurement and laser-diffraction based particle size analysis. Sonochemical ultrasound (130 kHz) was more effective than power ultrasound (35 kHz) in micelle disruption. This was attributed to the higher strain rates generated upon implosion of cavities, as well as the liberation of more free radicals to the surrounding medium. The higher the pH of solution, the more effective was the ultrasonic disruption due to a looser expanded assembly of particles at higher pH values. Sonochemical ultrasound decreased the consistency coefficient of casein solutions and increased their flow index except at a pH value of 6.35, while power ultrasound did not affect the flow behavior of solutions across the whole pH range.