Heat capacities of aluminium alloys

In the framework of the European COST 507 project the specific heat capacities of aluminium alloys and metal matrix composites based thereon have been measured between 20 and 520 °C by differential scanning calorimetry and stored in the databank THERSYST along with other thermophysical properties mainly drawn from literature. The curves show the influence of additional elements and reinforcements, of the fabrication process, thermomechanical treatment and scanning rate on the precipitation and dissolution kinetics of the various metastable phases and their relative amounts. The database may be used to select existing light alloys or elaborate new ones in view of specific technical applications.Dedicated to Professor Dr. Hans Löffler on the occasion of his 72nd birthday.     

Adult age differences in episodic memory: Further support for an associative-deficit hypothesis.

This study further tested an associative-deficit hypothesis (ADH; M. Naveh-Benjamin, 2000), which attributes a substantial part of older adults' deficient episodic memory performance to their difficulty in merging unrelated attributes-units of an episode into a cohesive unit. First, the results of 2 experiments replicate those observed by M. Naveh-Benjamin (2000) showing that older adults are particularly deficient in memory tests requiring associations. Second, the results extend the type of stimuli (pictures) under which older adults show this associative deficit. Third, the results support an ADH in that older adults show less of an associative deficit when the components of the episodes used are already connected in memory, thereby facilitating their encoding and retrieval. Finally, a group of younger adults who encoded the information under divided-attention conditions did not show this associative deficit. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Study and characterization of porous copper oxide produced by electrochemical anodization for radiometric heat absorber

The aim of this work is to optimize the different parameters for realization of an absorbing cavity to measure the incident absolute laser energy. Electrochemical oxidation is the background process that allowed the copper blackening. A study of the blackened surface quality was undertaken using atomic force microscopy (AFM) analysis and ultraviolet-visible-infrared spectrophotometry using a Shimadzu spectrophotometer. A two-dimensional and three-dimensional visualization by AFM of the formed oxide coating showed that the copper surfaces became porous after electrochemical etching with different roughness. This aspect is becoming more and more important with decreasing current density anodization. In a 2 mol L ^-1 of NaOH solution, at a temperature of 90°C, and using a 16 mA cm² constant density current, the copper oxide formed has a reflectivity of around 3% in the spectral range between 300 and 1,800 nm. Using the ‘mirage effect’ technique, the obtained Cu₂O diffusivity and thermal conductivity are respectively equal to (11.5 ± 0.5) 10 to 7 m² s^-1 and (370 ± 20) Wm^-1 K^-1. This allows us to consider that our Cu₂O coating is a good thermal conductor. The results of the optical and thermal studies dictate the choice of the cavity design. The absorbing cavity is a hollow cylinder machined to its base at an angle of 30°. If the included angle of the plane is 30° and the interior surface gives specular reflection, an incoming ray parallel to the axis will undergo five reflections before exit. So the absorption of the surface becomes closely near 0.999999.     

Dosimetric characteristic of a new 125I brachytherapy source

A new brachytherapy (125)I source has been investigated at Iranian Agricultural, Medical and Industrial Research School. Dosimetric characteristics [dose-rate constant Λ, radial dose function g(l)(r) and anisotropy function F(r,)] of IRA-(125)I were theoretically determined in terms of the updated AAPM task group 43 (TG-43U1) recommendations. Versions 5 and 4C of the Monte Carlo radiation transport code were used to calculate the dosimetry parameters around the source. The Monte Carlo calculated dose-rate constant of the (125)I source in water was found to be 92×10(-4) Gy h(-1) U(-1) with an approximate uncertainty of ±3 %. Brachytherapy seed model, 6711-(125)I, carrying (125)I radionuclides, was modelled and benchmarked against previously published values. Finally, the calculated results were compared with the published results of those of other source manufacturers.     

An experimental investigation into the performance of a domestic thermosyphon solar water heater under varying operating conditions

An experimental investigation has been carried out on a thermosyphon solar water heater. The system consisted of a flat-plate collector of 1.5 m² absorber area with 21 tubes/m width and storage tank of 125 litre capacity. Experiments were carried out for both cloudy and clear weather conditions in winter and summer. The hourly system performance was evaluated for all test conditions. The final mean tank temperature was measured daily which enabled the calculation of the possible contribution of solar energy for domestic hot water supply in Basrah, Iraq (latitude 30.76°N). The system was tested at both no-load and loading conditions. Intermittent and continuous load was imposed, and system performance was evaluated for each condition.     

Recycling value of building materials in building assessment systems

The selection of green building materials and products is by far the most controversial task in sustainable construction. Determining the merits of building materials and products in terms of their recycling value, which seems to be a simple matter, is a very controversial topic in building assessment systems. This paper suggests a method to assess energy savings by recycling building materials, which can be a potential indicator of recycling worth. The method takes account of material selection, construction and deconstruction technologies, and the frequency of recycling. The result of this study can be used in assessment tools as a factor separate from the embodied energy. Since embodied energy affects the potential recycling energy, another factor is defined, based on these two factors, in order to make it possible to compare and select materials correctly, based on their embodied energy and recycling potential.     

Comparative studies on protein fractions and amino acid composition from sorghum and pearl millet

A defatted flour sample of sorghum and pearl millet were separated into three fractions. These procedures involve extracting the defatted flour with aqueous sodium hydroxide (pH 11.9) followed by precipitation with diluted HCl acid (pH 4.8). The two protein fractions I (soluble at pH 4.8) and II (insoluble at pH 4.8) along with the remaining residues (fraction III) were lyophilized separately. The amino acid composition of the original flour and the three fractions were determined. Lysine seems to be the most deficient amino acid in the original flour and the remaining residues. Fraction I and II, in which the lysine accumulated, have essentially better amino acid profile and consequently nutritionally better quality than the protein of the original defatted flour. The recovered protein-rich fractions I and II should be useful as a protein ingredient in foods. The remaining residues can be extruded into convenience foods.     

Changes in blocking mechanisms during membrane processing of pomegranate juice

The effect of pressure, velocity, pretreatment, membrane type and pore size on fouling mechanisms were evaluated. Pomegranate juice was treated with polyvinylidene fluoride (PVDF) 0.22 μm and mixed cellulose ester (MCE) 0.1 μm at different pressures. Cake formation which was the dominant mechanism was formed in the first stages of process and, as the filtration proceeded, intermediate, standard, and complete blocking, respectively occurred at higher pressure (5 kPa). At lower pressure (0.5 kPa) the last mechanism did not occur. Results showed that cake formation was the only mechanism in MCE 0.22 μm, however, others occurred with MCE 0.1 μm and PVDF 0.22 μm. Using MCE 0.22 μm prior to MCE 0.025 μm can reduce the role of cake formation in pore blocking. Evaluation of the impact of velocity showed that at the higher velocity (0.53 m s⁻¹) the complete blocking occurred faster than at the lower velocity (0.09 m s⁻¹).     

DC and AC electrical conductivity of electro-deposited carbon-black–epoxy composite films

Carbon-black–epoxy composite films were prepared by cathodic electro-deposition of a dispersion containing carbon black and epoxy resins. The films, after baking at elevated temperature, show a semi-conducting behavior. Using DC conductivity measurements it was possible to determine the glass transition temperature of the samples, the conductivities of which lie in the sensitivity range of the instrument. Conductive samples show a positive temperature coefficient both below and above T_g. Based on the electrical impedance data extracted from the electrochemical impedance spectra, the exponents x and y were determined for the frequency dependence of the complex conductivity and complex dielectric constant as 0.8 and 0.2, respectively. These values are in good agreement with the classical values of x = 0.72 and y = 0.28. It was also found that these exponents are the same for all the CCB contents studied.