Radiation pattern design of photonic crystal LED optimized by using multi-objective grey wolf optimizer

Photonic Network Communications - This paper proposes an effective method for shaping the radiation pattern intensity of photonic crystal (PhC) light-emitting diode (LED). In this method, the...     

Hydrogen production employing Cu(BDC) metal–organic framework support in methanol steam reforming process within monolithic micro-reactors

Cu(BDC) metal–organic framework (MOF) was used as a support for the copper (Cu) catalyst applied in the methanol steam reforming (MSR) process at low temperatures (130–250 °C) with a feed WHSV = 9.2 h^?1 within the monolithic reactor. Also, the effects of diverse promoters were examined on the catalytic activities of the Cu/X–Cu(BDC) (X = Ce, Zn, Gd, Sm, La, Y, Pr) catalysts. Results showed that the Ce/Sm–Cu(BDC) supports exhibited highest activities, lowest reduction temperatures and largest specific surface areas, which caused highest distributions of the active copper metal nanoparticles on the supports. The reactor tests displayed that the activities of Cu/X–Cu(BDC) (X = Ce, Zn, Gd, Sm, La, Y, Pr) catalysts followed the order X = Ce > Sm > Y > La > Pr > Cu(BDC) > Zn > Gd. The highest activities of Ce and Sm containing catalysts were attributed to the presence of CeO₂ and Sm₂O₃ caused the oxygen vacancies on the catalyst surface which had positive effects on the methanol reforming process. The time-on-stream stability tests showed the highest resistance of the Cu/Ce–Cu(BDC) catalyst to the carbon formation during 32 h. Consequently, the Cu/Ce–Cu(BDC) with the highest stability, methanol conversion and carbon monoxide selectivity could be used in practical industrial applications.     

Human Cellular Retinol Binding Protein II Forms a Domain-Swapped Trimer Representing a Novel Fold and a New Template for Protein Engineering

Domain-swapping is a mechanism for evolving new protein structure from extant scaffolds, and has been an efficient protein-engineering strategy for tailoring functional diversity. However, domain swapping can only be exploited if it can be controlled, especially in cases where various folds can coexist. Herein, we describe the structure of a domain-swapped trimer of the iLBP family member hCRBPII, and suggest a mechanism for domain-swapped trimerization. It is further shown that domain-swapped trimerization can be favored by strategic installation of a disulfide bond, thus demonstrating a strategy for fold control. We further show the domain-swapped trimer to be a useful protein design template by installing a high-affinity metal binding site through the introduction of a single mutation, taking advantage of its threefold symmetry. Together, these studies show how nature can promote oligomerization, stabilize a specific oligomer, and generate new function with minimal changes to the protein sequence.     

Vertex-Edge Degree Based Indices of Honey Comb Derived Network

Chemical graph theory is a branch of mathematics which combines graph theory and chemistry. Chemical reaction network theory is a territory of applied mathematics that endeavors to display the conduct of genuine compound frameworks. It pulled the research community due to its applications in theoretical and organic chemistry since 1960. Additionally, it also increases the interest the mathematicians due to the interesting mathematical structures and problems are involved. The structure of an interconnection network can be represented by a graph. In the network, vertices represent the processor nodes and edges represent the links between the processor nodes. Graph invariants play a vital feature in graph theory and distinguish the structural properties of graphs and networks. In this paper, we determined the newly introduced topological indices namely, first -degree Zagreb index, first -degree Zagreb index, second -degree Zagreb index, -degree Randic index, -degree atom-bond connectivity index, -degree geometric-arithmetic index, -degree harmonic index and -degree sum-connectivity index for honey comb derived network. In the analysis of the quantitative structure property relationships (QSPRs) and the quantitative structureactivity relationships (QSARs), graph invariants are important tools to approximate and predicate the properties of the biological and chemical compounds. Also, we give the numerical and graphical representation of our outcomes.     

Studying the effect of particle size on the antibacterial activity of some N-nicotinyl phosphoric triamides

Using ultrasonic top-to-down method, nanoparticles of two N-nicotinyl phosphoric triamides: C₅H₄NC(O)NHP(O)R, R?=?4-CH₃-NC₅H₁₀ (1), (CH₃)₃CNH₂ (2) were prepared for the first time and characterized by ³¹P, ¹³C, ¹H NMR, FTIR, scanning electron microscopy, energy dispersive X-ray. The average particle size of 1 and 2 were 60–70 and 40–50?nm, respectively, and the morphology was spherical for 1 and rod for 2. Solid state (powder) antibacterial effect of these compounds and two other similar reported ones, in their macro- and nanosizes, were evaluated with colony counting method on one Gram-positive (Staphylococcus aureus) and one Gram-negative (Escherichia coli) bacteria in Brain–Heart infusion culture medium. Results showed that all the macro- and nanosized compounds, except macrosized 1, were antibacterial and all nanoscaled ones had stronger antibacterial activity than their macroscaled analogues. The most effect of the particle size was observed for 1: by decreasing the particle sizes, the antibacterial activity state of 1 was changed from inactive (for macro) to potent (for nano).     

Investigating the effect of custom‐made insoles and exercises on lower limb and back discomfort in assembly‐line workers in a rubber tire factory: A randomized controlled trial

Many occupations require standing for prolonged periods, which can be a major contributor to musculoskeletal problems and cause disturbances in different parts of the body, especially the lower back and lower extremities. The aim of this study was to investigate the effect of custom‐made insoles and exercise training on the lower limb and lower back discomfort in workers on a production line at a rubber tire factory. One hundred male workers (mean age 35.96 years, work experience of 10.62 years, standing time 6.58 hr) participated in this randomized controlled trial. The men were randomly assigned to one of four groups: (a) custom‐made insole plus lower limb exercises, (b) insoles only, (c) lower limb exercises only, and (d) no intervention. Discomfort level was recorded with a visual analog scale and a body map. The data were analyzed with analysis of covariance. The results showed a significant difference in discomfort levels between groups in the lower back (p = .001), thigh (p = .001), and knee (p = .001) areas. The combined insole and exercise group had less discomfort in the lower back, thigh, and knee. In the group that used the insole only without exercises, the discomfort level in the lower back area was reduced. The results indicate that the simultaneous use of insoles and exercises might be an effective intervention to reduce discomfort in the lower limbs and lower back in workers who remain standing for prolonged periods.     

Beneficial Effects of Silicon Application in Alleviating Salinity Stress in Halophytic Puccinellia Distans Plants

Silicon - Little is known on the impact of silicon (Si) nutrition in halophytes. Accordingly, response of Si accumulating halophyte Puccinellia distans to Si nutrition was investigated. The...     

Effects of Plant Growth Hormones on Mucor indicus Growth and Chitosan and Ethanol Production

The objective of this study was to investigate the effects of indole-3-acetic acid (IAA) and kinetin (KIN) on Mucor indicus growth, cell wall composition, and ethanol production. A semi-synthetic medium, supplemented with 0–5 mg/L hormones, was used for the cultivations (at 32 °C for 48 h). By addition of 1 mg/L of each hormone, the biomass and ethanol yields were increased and decreased, respectively. At higher levels, however, an inverse trend was observed. The glucosamine fraction of the cell wall, as a representative for chitosan, followed similar but sharper changes, compared to the biomass. The highest level was 221% higher than that obtained without hormones. The sum of glucosamine and N-acetyl glucosamine (chitin and chitosan) was noticeably enhanced in the presence of the hormones. Increase of chitosan was accompanied by a decrease in the phosphate content, with the lowest phosphate (0.01 g/g cell wall) being obtained when the chitosan was at the maximum (0.45 g/g cell wall). In conclusion, IAA and KIN significantly enhanced the M. indicus growth and chitosan production, while at the same time decreasing the ethanol yield to some extent. This study shows that plant growth hormones have a high potential for the improvement of fungal chitosan production by M. indicus.     

Coagulation performance of cationic polyelectrolyte/TiO2 nanocomposites prepared under LED irradiation

A series of acrylic-based cationic polyelectrolyte nanocomposites including water-soluble monomers acrylamide (AAm) and 2-acryloyloxyethyltrimethylammonium chloride (DAC) with different mole percent of DAC (30, 40, and 45%) in feed were produced using TiO₂ nanoparticles (0.018, 0.037, and 0.11 wt%) as photoinitiator in the aqueous solution of monomers and named as p(ADT)_1–9. The LED light at 365 nm was used for photocatalysis activation of TiO₂ nanoparticles. Structure and morphology of the synthetic polyelectrolyte were characterized by FT-IR, NMR, TGA, FESEM-EDX, and TEM. The other properties of synthetic polyelectrolyte such as molecular weight, viscosity, charge density, AAm/DAC molar ratio in copolymers, reactivity ratio values for the AAm and DAC monomers, and polymerization degree were measured. Furthermore, coagulation performance of these polyelectrolytes was investigated in soil suspension (1,000 ml, initial turbidity = 1,715 NTU). The prepared nanocomposites enhanced the coagulation of soil suspension up to 99.5% in low dosages. The best turbidity removal efficiencies (TRE) between 99.5–99.77% were achieved by p(ADT)₃ conatining 30% DAC and 0.11 wt% TiO₂. Decreasing the temperature from room temperature to 0°C led to an increase in TRE from 98 to 99.8%. Also, increasing the pH from 4 to 12 led to a decrease in TRE from 99.86 to 94%.     

Formulation and Characterization of Human Milk Fat Substitutes Made from Blends of Refined Palm Olein,and Soybean,Olive, Fish,and Virgin Coconut Oils

The simplest and the most cost-effective way of human milk fat substitute (HMFS) production is formulating of suitable vegetable oils at proper ratios. To do this, the D-optimal mixture design was used to optimize the HMFS formulation. The design included 25 formulations made from refined palm olein (35–55%), soybean oil (5–25%), olive oil (5–20%), virgin coconut oil (5–15%), and fish oil (0–10%). Samples were produced in laboratory and characterized in terms of fatty acid and triacylglycerol (TAG) compositions, free fatty acid content, peroxide value, iodine value, and oxidative stability index (OSI). HMFS samples were also compared with Codex Alimentarius (CA) and Iran National Standards Organization (INSO) standards. Each characteristic of HMFS samples was then expressed as a function of ingredient ratio using regression models. Finally, using numerical optimization, four optimized blends (PB₁-PB₄) were selected, made in the laboratory (HMFS₁-HMFS₄), characterized, and compared with CA and INSO standards. The properties of all the optimized blends (except the palmitic acid content of HMFS₂ and the monounsaturated fatty acid [MUFA] content of HMFS₃) met the standards. HMFS₄ showed the highest OSI in Rancimat and the lowest oxidation rate in Schaal oven tests. POL (19.53–21.73%), PPO (20.77–21.73%), OOO (9.11–11.16%), and OPO (8.84–9.46%) were the main (totally about 60%) TAG species found in HMFS samples. In conclusion, the HMFS₄ formula (55% palm olein, 13.5% soybean oil, 16% refined olive oil, 15% virgin coconut oil, and 0.5% fish oil) was suggested as the best formula for HMFS production.