Preparation of shish‐kebab and nanofiber polyethylene with chromium/Santa Barbara amorphous silica‐15 catalysts

Cr/SBA‐15 catalysts were prepared by the grafting of chromium nitrate nonahydrate [Cr(NO₃)₃·9H₂O] complexes onto SBA‐15 mesoporous materials. Shish‐kebab and nanofiber polyethylenes (PEs) were prepared under different temperatures via ethylene extrusion polymerization with the Cr(NO₃)₃·9H₂O catalytic system. The diameter of a single nanofiber was 100–250 nm. Scanning electron microscopy images showed that the polymer obtained from the SBA‐15‐supported catalyst under different polymerization temperatures produced nanofiber and/or shish‐kebab morphologies. X‐ray diffraction and differential scanning calorimetry were used to characterize microstructures of the materials. Polymers obtained with all of the catalysts showed a melting temperature, bulk density, and high load melt index; this indicated the formation of linear high‐density PE. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of new photoactive polyamides containing 4‐(4‐dimethylaminophenyl)urazole units

4‐(4‐dimethylaminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( DAPTD ) was prepared from 4‐dimethylaminobenzoic acid in five steps. The compound DAPTD was reacted with excess acetyl chloride in N,N‐dimethylacetamide (DMAc) solution and gave 1,2‐bisacetyl‐4‐[4‐(dimethylaminophenyl)]‐1,2,4‐triazolidine‐3,5‐dione as a model compound. Solution polycondensation reactions of monomer with succinyl chloride (SucC), suberoyl chloride (SubC), and sebacoyl chloride (SebC) were performed under conventional solution polymerization techniques in the presence of triethylamine and pyridine as a catalyst in N‐methylpyrrolidone (NMP) and led to the formation of novel aliphatic polyamides. These novel polyamides have inherent viscosities in the range of 0.09–0.21 dL/g in N,N‐dimethylformamide (DMF) at 25°C. Fluorimetric studies of the model compound as well as polymers were performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 947–954, 2007     

The first report on the atom transfer radical polymerization of an optically active acidic monomer based on L‐phenylalanine

For the first time, acidic monomer chiral N‐acryloyl‐L ‐phenylalanine was polymerized directly by atom transfer radical polymerization under mild conditions. Controlled polymerization was carried out in pure water, methanol/water mixture, or pure methanol using water‐soluble initiators, such as 2‐hydroxyethyl‐2′‐methyl‐2′‐bromopropionate and sodium‐4‐(bromomethyl)benzoate at room temperature. The corresponding optically active biocompatible amino acid‐based homopolymers were obtained in good yields with narrow molecular weight distributions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Applying Pebax-1657/ZnO mixed matrix membranes for CO2/CH4 separation

Abstract

Membrane technologies as conservative approaches have absorbed much attention in chemical and petroleum engineering, recently. The current research presents the preparation of effectively mixed matrix membranes (MMMs) using polyether-block-amide (Pebax-1657) as a polymeric matrix and zinc oxide (ZnO) nanoparticles with various contents (0.0, 2.5, 5.0, 7.5, and 10.0?wt%) as a filler. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and field emission scanning microscopy (FESEM) were conducted to characterize the prepared membranes. The membrane performance was evaluated by caring out permeation experiments of the CO₂ and CH₄ at a pressure of 3?bar and temperature of 30?°C. Based on the obtained results, the CO₂ permeability and ideal CO₂/CH₄ selectivity increased about 13 and 21%, respectively at 10.0?wt% loading of ZnO in the polymer matrix.     

Multifractal analysis of Mg-doped ZnO thin films deposited by sol–gel spin coating method

A multifractal analysis has been performed on the 3D (three-dimensional) surface microtexture of magnesium-doped zinc oxide (ZnO:Mg) thin films with doping concentration of 0, 2, 4, and 5%. Thin films were deposited onto the glass substrates via the sol–gel spin coating method. The effect of magnesium doping, on the crystal structure, morphology, and band gap for ZnO:Mg thin films has been analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV–Vis spectroscopy. It has been observed that the surface of ZnO thin films is multifractal in nature. However, multifractality and complexity observed to decrease with increasing content of Mg in ZnO thin films due to formation of islands on the surface in accordance with Volmer–Weber growth mechanism. The investigations revealed that crystallinity, microtexture, morphology, and optical properties of the thin films can be tuned by controlling the Mg content within the ZnO lattice. In particular, their optical band gap energies were 3.27, 3.31, 3.34, and 3.33 eV at 0, 2, 4, and 5%, respectively. The prepared thin films of ZnO:Mg with tuned characteristics would have promising applications in optoelectronic devices.     

Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione and Diisocyanates

Summary 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione (DAPTD) was prepared from 4-dimethylaminobenzoic acid in five steps. The reaction of monomer DAPTD with n-isopropylisocyanate was performed at room temperature in N,N-dimethylacetamide (DMAc) solution and the resulting bis-urea derivative was obtained in high yield and was finally used as a model compound for polymerization reaction. The step-growth polymerization reactions of monomer with hexamethylene diisocyanate (HMDI), isophorone diisocyanate (IPDI) and toluene-2,4-diisocyanate (TDI) were performed in DMAc solution in the presence of pyridine, triethylamine or dibutyltin dilurate as catalysts. Some physical properties and structural characterization of these novel polyureas are reported. Fluorimetric studies of the model compound as well as polymers were performed.     

Optimization of the water-based road-marking paint by experimental design, mixture method

The main purpose of this research is formulating and optimizing a new road-marking paint which is an environmentally friendly product. This paint is produced with an emulsion of an acrylic copolymer and contains the least of the volatile organic compounds. The formulation and optimization procedure is carried out on the base of experimental design by the method of mixture in which the important paint properties are modeled by using special cubic model. The present method has the capability of investigation the effect of raw materials at different levels with fewer experiments than factorial and fractional factorial design.

In this research, the main parameters such as resin, pigment and filler were selected at different levels, and different samples were prepared by combination of additives and other required reagents. The properties of wet and dry films of the samples were determined using ASTM test methods. Different responses such as pigment volume concentration (PVC), latex critical pigment volume concentration (LCPVC), abrasion resistance, hardness, gloss, no pick up time and surface drying time, were selected as the objective functions of this study. By running DX6 software, using special cubic model and selection of desired range of end-use properties, the region of optimum paint formula was determined.

The accuracy of the model was examined by preparing a sample in optimized region and by determining its final properties, experimentally. The results exhibit a good agreement between the model and experimental measurements. This product was compared with commercial solvent based traffic paint and good quality was reported in end-use properties.