Effect of sintering on the microstructure and mechanical properties of alloy titanium-wollastonite composite fabricated by powder injection moulding process

Composite biomaterials are in high demand in the medical field of today. The combination of bioactive wollastonite (WA) glass ceramic with the biocompatibility of alloy titanium (Ti6Al4V) could be a good candidate for implant applications. The rheological properties of Ti6Al4V/WA feedstock show a pseudoplastic behaviour with low activation energy. The feedstock was successfully injected as a green part with no defects. The green part was solvent debound for 6?h in heptane and thermal debound in an argon environment for 1?h. The brown part was successfully sintered at 1300?°C for 3?h with 5?°C/min heating and cooling rates. The average sintered density was 4.12?g/cm³; which is 97.5% from the theoretical density. The highest Young's modulus obtained was 18.10?GPa; which is in the range of human bone strength. EDX analysis shows that by increasing sintering temperature, the level of oxygen decreased. Cell viability test shown an absorbance increased with days increasing indicated that the cellular were proliferated on the composite Ti6Al4V/WA composite which also proved that the composite was non-toxic. This indicates that the Ti6Al4V/WA composite is suitable for bone implant applications.     

On business process monitoring using cross-flow coordination

This paper presents an approach for monitoring the execution progress of business processes. The monitoring focuses on the exceptions that could arise during this execution and, hence, could make the processes fail if not handled properly and timely. The approach relies on three flows known as control, communication, and navigation. The control flow connects tasks together with respect to a certain business logic. The communication flow captures the messages exchanged between persons/machines when they perform tasks of processes. Finally, the navigation flow captures the interactions between specialized networks that offer solutions to exceptions. These networks are built upon relations between tasks, between persons, and between machines. The coordination of control, communication, and navigation flows focuses on both the actions that are taken and the messages that are exchanged when handling exceptions. A system demonstrating flow development and coordination is, also, presented in the paper.     

Carbonaceous microsphere-based superabsorbent polymer as filler for coating of NPK fertilizer: Fabrication,properties, swelling,and nitrogen release characteristics

Recently, the use of controlled release fertilizers in agriculture has resulted in huge benefits in plant growth and cultivation. Superabsorbent polymer (SAP)-coated fertilizers have the added advantage in retaining water in soil after irrigation and also reduce the nutrient release rate from soil in a controlled manner. This study aimed to produce a nitrogen–phosphorus–potassium (NPK) fertilizer coated with superabsorbent carbonaceous microspheres polymer (SPC) by inverse suspension polymerization method with water-retention and controlled release properties. Two sets of experiments were conducted: (1) three different weight percentages and (2) different materials. NPK coated with SPC showed increasing water-retention ability with respect to carbon microsphere percentages and retains >80% water at the 30th day of experiment compared with pure NPK and NPK coated with SAP. The slow release behavior of all samples was investigated by induced coupled plasma mass spectrometry spectrometry and results showed that NPK coated with SAP and SPC has a low release rate with <50% nutrient release compared with uncoated NPK at the 30th day. The release mechanism kinetics of NPK coated with SAP and SPC were studied based on the Kosmeyer–Peppas model. The mechanisms approached Fickian diffusion-controlled release as the n value for both samples was less than 0.5. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48396.     

Heavy metal ions removal from wastewater using electrocoagulation processes: A comprehensive review

A vast number of publications have investigated the application of electrocoagulation (EC) process in heavy metal ions removal from wastewaters. Most of these studies were simple lab-scale using synthetic wastewater with the absence of holistic and systematic approach to consider the process complexity. This comprehensive review considers the fundamental aspects of EC processes such as mechanisms, kinetic models, and isotherm models used by different researchers. Furthermore, the impact of the main design and process operational parameters on the removal efficiency is discussed and analyzed. Many concluding remarks and perspectives are stated to give insights for possible future investigations.     

Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2,4-Dinitrophenol

Molecularly imprinted polymers (MIPs) were prepared by bulk polymerization in acetonitrile using 2,4-dinitrophenol, acrylamide, ethylene glycol dimethacrylate, and benzoyl peroxide, as the template, functional monomer, cross-linker, and initiator, respectively. The MIP membrane was prepared by hybridization of MIP particles with cellulose acetate (CA) and polystyrene (PS) after being ground and sieved. The prepared MIP membrane was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters studied for the removal of 2,4-dinitrophenol included the effect of pH, sorption kinetics, and the selectivity of the MIP membrane. Maximum sorption of 2,4-nitrophenol by the fabricated CA membrane with MIP (CA-MIP) and the PS membrane with MIP (PS-MIP) was observed at pH 7.0 and pH 5.0, respectively. The sorption of 2,4-dinitrophenol by CA-MIP and PS-MIP followed a pseudo–second-order kinetic model. For a selectivity study, 2,4-dichlorophenol, 3-chlorophenol, and phenol were selected as potential interferences. The sorption capability of CA-MIP and PS-MIP towards 2,4-dinitrophenol was observed to be higher than that of 2,4-dichlorophenol, 3-chlorophenol, or phenol.     

Electrokinetic chromatography utilizing two pseudostationary phases providing ion-exchange and hydrophobic interactions

The electrokinetic chromatographic separation of a series of inorganic and organic anions was achieved by utilizing an electrolyte system comprising a cationic soluble polymer (poly(diallydimethylammonium chloride, PDDAC) and a neutral beta-cyclodextrin (beta-CD) as pseudostationary phases. The separation mechanism was a combination of electrophoresis, ion-exchange (IE) interactions with PDDAC, and hydrophobic interactions with beta-CD. The extent of each chromatographic interaction was independently variable, allowing for control of the separation selectivity of the system. IE interactions could be varied by changing either the PDDAC concentration or the concentration of a competing ion (e.g., chloride) in the BGE, while the hydrophobic interactions could be varied by changing the concentration of beta-CD. The separation system was very robust, with the reproducibility of the migration times being <0.7% RSD. A mathematical model that predicted the mobilities of analytes under varying experimental conditions was derived and was shown to give good correlation (r2 = 0.9804) between predicted and experimental migration times. Parameters derived from the model were in good agreement with the ion-exchange and hydrophobic characteristics of the analytes. The model was also applied successfully to the optimization of conditions for the separation of a mixture of analytes or for conditions under which particular analytes migrated in a desired order. That is, the opportunity to tune the separation selectivity has been demonstrated.