Joint QoE-based user association and efficient cell–carrier distribution for enabling fully hybrid spectrum sharing approach in 5G mmWave cellular networks

Densifying the network by adding more minicell towers or relays throughout a hot spot area while extensively reusing the available spectrum is an essential choice to improve QoS. Unfortunately, this approach can be prohibitively costly. One possible solution to reduce the capital and operating expenditure in such overdensified networks is the adoption of the spectrum-sharing approach. However, both approaches would complicate the interference phenomenon either among inter- or intraoperators, which may cause serious performance degradation. In this paper, a fully hybrid spectrum-sharing (FHSS) approach aided by an efficient cell–carrier distribution was proposed with consideration to the interference dilemma. Moreover, an adaptive hybrid QoE-based mmWave user association (mUA) scheme was presented to assign a typical user to the serving mmWave base station (mBS), which offers the highest achievable data rate. The proposed FHSS approach (with the presented QoE-based mUA) was compared with recent works and with both FHSS approach using the conventional max-SINR-based mUA, which assigns a typical user to the tagged mBS carrying the highest signal-to-interference-plus noise ratio and the baseline scenario (licensed spectrum access). In particular, three spectrum access methods (licensed, semipooled, and fully pooled) were integrated in a hybrid manner to engage improved data rates to users. Numerical results show that the joint cell–carrier distribution and FHSS approach with QoE-based mUA outperform both baselines FHSS with the max-SINR mUA scheme and the licensed spectrum access. Furthermore, results demonstrate the effectiveness of the proposed approach in terms of both operators’ independence and fairness.

     

ECRP: an energy-aware cluster-based routing protocol for wireless sensor networks

Energy conservation is the main issue in wireless sensor networks. Many existing clustering protocols have been proposed to balance the energy consumption and maximize the battery lifetime of sensor nodes. However, these protocols suffer from the excessive overhead due to repetitive clustering resulting in high-energy consumption. In this paper, we propose energy-aware cluster-based routing protocol (ECRP) in which not only the cluster head (CH) role rotates based on energy around all cluster members until the end of network functioning to avoid frequent re-clustering, but also it can adapt the network topology change. Further, ECRP introduces a multi-hop routing algorithm so that the energy consumption is minimized and balanced. As well, a fault-tolerant mechanism is proposed to cope up with the failure of CHs and relay nodes. We perform extensive simulations on the proposed protocol using different network scenarios. The simulation results demonstrate the superiority of ECRP compared with recent and relevant existing protocols in terms of main performance metrics.

     

Fabrication and simulation studies on D-shaped optical fiber sensor via surface plasmon resonance

This paper describes simulation and experimental methods for designing a D-shaped surface plasmon resonance (SPR) fibre sensor. The sensor consists of two set-up approaches. Finite element method is used in simulation on the fibre sensor device. Two experimental methods for detecting relative intensity are used by varying the wavelength of the optical signal sources and the thickness of gold layer coated on the D-shaped fibre. In the first method, the sensor device works by detecting the relative intensity of two optical signal sources having different wavelengths. In the second set-up, the relative intensity between two D-shaped fibres coated with different thicknesses of gold is measured when a single signal source is launched at the input. The difference in intensities of the signal outputs is used to estimate the refractive index at the sensing region. A prototype SPR D-shaped fibre sensor has been fabricated and the experimental results show good agreement with simulation.     

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λ_o × 0.215 λ_o × 0.0196 λ_o with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.     

Assessment of a medical information system: the mediating role of use and user satisfaction on the success of human interaction with the mobile healthcare system (iHeart)

Cognition, Technology & Work - iHeart is a mobile healthcare system which monitors and tracks patients with hypertension and arrhythmia. This empirical study aims to assess the interaction...     

Modeling and Exploring Co‐variations in the Geometry and Configuration of Man‐made 3D Shape Families

We introduce co‐variation analysis as a tool for modeling the way part geometries and configurations co‐vary across a family of man‐made 3D shapes. While man‐made 3D objects exhibit large geometric and structural variations, the geometry, structure, and configuration of their individual components usually do not vary independently from each other but in a correlated fashion. The size of the body of an airplane, for example, constrains the range of deformations its wings can undergo to ensure that the entire object remains a functionally‐valid airplane. These co‐variation constraints, which are often non‐linear, can be either physical, and thus they can be explicitly enumerated, or implicit to the design and style of the shape family. In this article, we propose a data‐driven approach, which takes pre‐segmented 3D shapes with known component‐wise correspondences and learns how various geometric and structural properties of their components co‐vary across the set. We demonstrate, using a variety of 3D shape families, the utility of the proposed co‐variation analysis in various applications including 3D shape repositories exploration and shape editing where the propagation of deformations is guided by the co‐variation analysis. We also show that the framework can be used for context‐guided orientation of objects in 3D scenes.     

Cubic membranes: a structure-based design for DNA uptake.

Cubic membranes are soft three-dimensional crystals found within cell organelles in a variety of living systems, despite the aphorism of Fedorov: 'crystallization is death'. They consist of multi-bilayer lipid-protein stacks, folded onto anticlastic surfaces that resemble triply periodic minimal surfaces, forming highly swollen crystalline sponges. Although cubic membranes have been observed in numerous cell types and under different pathophysiological conditions, knowledge about the formation and potential function(s) of non-lamellar, cubic structures in biological systems is scarce. We report that mitochondria with this cubic membrane organization isolated from starved amoeba Chaos carolinense interact sufficiently with short segments of phosphorothioate oligonucleotides (PS-ODNs) to give significant ODNs uptake. ODNs condensed within the convoluted channels of cubic membrane by an unknown passive targeting mechanism. Moreover, the interaction between ODNs and cubic membrane is sufficient to retard electrophoretic mobility of the ODN component in the gel matrix. These ODN-cubic membrane complexes are readily internalized within the cytoplasm of cultured mammalian cells. Transmission electron microscopic analysis confirms ODNs uptake by cubic membranes and internalization of ODN-cubic membrane complexes into the culture cells. Cubic membranes thus may offer a new, potentially benign medium for gene transfection.     

Hexavalent chromium reduction by Acinetobacter haemolyticus isolated from heavy-metal contaminated wastewater

Possible application of a locally isolated environmental isolate, Acinetobacter haemolyticus to remediate Cr(VI) contamination in water system was demonstrated. Cr(VI) reduction by A. haemolyticus seems to favour the lower concentrations (10-30 mg/L). However, incomplete Cr(VI) reduction occurred at 70-100 mg/L Cr(VI). Initial specific reduction rate increased with Cr(VI) concentrations. Cr(VI) reduction was not affected by 1 or 10 mM sodium azide (metabolic inhibitor), 10 mM of PO(4)3-, SO4(2-), SO(3)2-, NO3- or 30 mg/L of Pb(II), Zn(II), Cd(II) ions. However, heat treatment caused significant dropped in Cr(VI) reduction to less than 20% only. A. haemolyticus cells loses its shape and size after exposure to 10 and 50 mg Cr(VI)/L as revealed from TEM examination. The presence of electron-dense particles in the cytoplasmic region of the bacteria suggested deposition of chromium in the cells.     

Synthesis of mesoporous titania nanoparticles with anatase frameworks and investigation of their photocatalytic performance

In this research paper, we synthesize various types of mesoporous titania nanoparticles (MTNs) with suitable surface area and pore size while creating anatase frameworks by applying hydrothermal treatment or calcination at different temperatures. Wide-angle XRD patterns and N2 adsorption-desorption isotherms reveal that the MTNs with crystallized anatase frameworks can be synthesized after an optimized hydrothermal treatment. In contrast, calcination of MTNs at high temperature caused the collapse of mesoporous structure, resulted in drastic reduction of the surface area of the MTNs. In addition, we investigate the photocatalytic activity of the prepared MTNs by measuring the degradation of methylene blue (MB). The results show that the reaction rates of the photocatalytic MB decomposition strongly depend on the degree of crystallinity in the MTNs frameworks and on the surface area of MTNs.     

Case Study: Flood Mitigation of the Muda River, Malaysia

The 2003 flood of the Muda River reached 1,340?m3/s at Ladang Victoria and adversely impacted 45,000 people in Malaysia. A flood control remediation plan proposed a levee height based on a 50-year discharge of 1,815?m3/s obtained from hydrologic models. This design discharge falls outside the 95% confidence intervals of the flood frequency analysis based on field measurements. Instream sand and gravel mining operations also caused excessive riverbed degradation, which largely off sets apparent benefits for flood control. Pumping stations have been systematically required at irrigation canal intakes. Several bridge piers have also been severely undermined and emergency abutment protection works were needed in several places. Instream sand and gravel mining activities should be replaced with offstream mining in the future.