The influence of chloride-ion concentration on the Pitting of steel in simulated concrete environment

The influence of chloride-ion concentration on the pitting behaviour of steel in saturated Ca(OH)₂ solution was studied using the D.C. polarization technique. Results seem to indicate a threshold chloride level for the on-set of severe pitting around 3000 ppm, the pitting potential E_p exhibits dramatic drop and large hysteresis loops develop. The results provide insight into the pitting performance of steel in concrete and highlight the poor repassivation of this metal/environment system.     

Principles of high-resolution radar based on nonsinusoidal waves.II. Generalized ambiguity function

For pt.I see ibid., vol.31, no.4, p.359-68 (1989). A generalized ambiguity function for nonsinusoidal coded waveforms that are represented as a train of properly weighted Gaussian pulses is derived and analyzed to study its properties. Computer plots of generalized ambiguity functions of different binary codes, e.g. Barker, complementary, and pseudorandom codes, are presented. The various computer plots show that the desired thumbtack ambiguity function is achievable by nonsinusoidal coded waveforms     

Hyperspectral imaging-based unsupervised adulterated red chili content transformation for classification: Identification of red chili adulterants

Neural Computing and Applications - Preserving red-chili quality is of utmost importance in which the authorities demand quality techniques to detect, classify, and prevent it from impurities. For...     

Uptake of Pb(II) and Cd(II) by a new phenolformaldehyde polymer resin derived by the insertion of sulfur ligands in the form of xanthate

A new phenolformaldehyde polymer resin containing potential soft‐type donor atoms (sulfur atoms) was synthesized by the reaction of sodium salt of 2,4‐dihydroxyacetophenone formaldehyde resin with carbon disulfide. The resin was characterized by elemental analysis, IR, and ¹H‐NMR spectral studies. Because of its insolubility in aqueous media, the resin was successfully used in the removal of Pb(II) and Cd(II). Parameters such as the effect of pH, the effect of time, competitive studies, the effect of initial metal‐ion concentration, and the recyclability of the polymer resin were studied. The amount of metal removed by the resin was determined with atomic absorption spectrophotometry. The retention properties were strongly dependent on pH. The elution of metal ions was investigated in acid media. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1932–1936, 2004     

Optimization of abrasive water jet cutting of ductile materials

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials: AISI 4340 (high strength low alloy steel, hardened to 49HRc) and Aluminum 2219. Analysis of Variance (ANOVA) was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.     

Pivotal Role of Phytohormones and Their Responsive Genes in Plant Growth and Their Signaling and Transduction Pathway under Salt Stress in Cotton

The presence of phyto-hormones in plants at relatively low concentrations plays an indispensable role in regulating crop growth and yield. Salt stress is one of the major abiotic stresses limiting cotton production. It has been reported that exogenous phyto-hormones are involved in various plant defense systems against salt stress. Recently, different studies revealed the pivotal performance of hormones in regulating cotton growth and yield. However, a comprehensive understanding of these exogenous hormones, which regulate cotton growth and yield under salt stress, is lacking. In this review, we focused on new advances in elucidating the roles of exogenous hormones (gibberellin (GA) and salicylic acid (SA)) and their signaling and transduction pathways and the cross-talk between GA and SA in regulating crop growth and development under salt stress. In this review, we not only focused on the role of phyto-hormones but also identified the roles of GA and SA responsive genes to salt stress. Our aim is to provide a comprehensive review of the performance of GA and SA and their responsive genes under salt stress, assisting in the further elucidation of the mechanism that plant hormones use to regulate growth and yield under salt stress.     

Deposition thickness based high-throughput nano-imprint template

International Technology Roadmap for Semiconductors 2003 projected nano-imprint lithography has the potential of high throughput, sub-20 nm resolution, and low cost [S.Y. Chou, P.R. Krauss, P.J. Renstrom, Appl. Phys. Lett. 67 (1995) 3144; Science 272 (1996) 85, J.A. Rogers, C. Mirkin, Mater. Res. Bull. 26 (2001)]. For nano-imprint lithography, a template with 1X resolution is required. The existing industrial infrastructure for supporting deep ultra violet 4X photo masks by e-beam and/or a laser beam scanning writer does not offer pitch (center-to-center distance of an array of patterned lines) less than ∼60 nm [<http://public.itrs.net/2003ITRS>]. For nano-imprint lithography to be accepted across the industry, a reproducible simple fabrication process to make a high resolution, single emboss template is essential [L. Jay Guo, J. Phys. D: Appl. Phys. 37 (2004) R123-R141]. Here we show, a general fabrication method and fabricated nano-imprint templates with sub-15 nm template line width and 10 nm pitch length through out the entire 200 mm wafer, varying the deposition thickness of multiple alternate films, using atomic layer deposition. Although multilayer nano-imprint templates and their exciting use have been demonstrated, [W.J. Dauksher et al., J. Vac. Sci. Technol. B 22 (2004) 3306, B. Heidari, et al., The 49th international conference on electron, ion and photon beam technology and nanofabrication, Orlando, Florida, 2005, William M. Tong, et al., Proc. SPIE 5751 (2005) 46-55, N.A. Melosh, A. Boukai, F. Diana, B. Gerardot, A. Badolato, P.M. Petroff, J.R. Heath, Science 300 (2003) 112] such a small pitch was not shown and either complex lattice mismatch-based epitaxially grown films or unconventional etch chemistry was used. The bare necessity was a simple and economical fabrication process for a high throughput nano-imprint template. In that context, we have developed a template fabrication process using classical micro-fabrication techniques. Successful use of these techniques made the template fabrication process simple, economical, and expedient. Also a novel technique to provide flexible and accurate alignment for nanowire patterning has been described. In this technique, nanowire patterning is accomplished on the entire wafer with a single impression. Industry level batch-fabrication of our scheme illustrates its reproducibility and manufacturability. We anticipate, this simple, economical and time saving technique will help researchers and developers to perform their experiment on nano-scale feature patterned substrates easily and conveniently.     

Queue length‐based load balancing in data center networks

Traffic load balancing in data centers is an important requirement. Traffic dynamics and possibilities of changes in the topology (e.g., failures and asymmetries) make load balancing a challenging task. Existing end‐host–based schemes either employ the predominantly used ECN or combine it with RTT to get congestion information of paths. Both congestion signals, ECN and RTT, have limitations; ECN only tells whether the queue length is above or below a threshold value but does not inform about the extent of congestion; similarly, RTT in data center networks is on the scale of up to few hundreds of microseconds, and current data center operating systems lack fine‐grained microsecond‐level timers. Therefore, there is a need of a new congestion signal which should give accurate information of congestion along the path. Furthermore, in end‐host–based schemes, detecting asymmetries in the topology is challenging due to the inability to accurately measure RTT on the scale of microseconds. This paper presents QLLB, an end‐host–based, queue length–based load balancing scheme. QLLB employs a new queue length–based congestion signal that gives an exact measure of congestion along the paths. Furthermore, QLLB uses relative‐RTT to detect asymmetries in the topology. QLLB is implemented in ns‐3 and compared with ECMP, CONGA, and Hermes. The results show that QLLB significantly improves performance of short flows over the other schemes and performs within acceptable level, of CONGA and Hermes, for long flows. In addition, QLLB effectively detects asymmetric paths and performs better than Hermes under high loads.