EPR Study of CO Adsorption onto CoZSM-5 Zeolite: Evidence for Spin Crossover upon Coordination and |z2, 2A1〉 Ground State

Adsorption of CO onto dehydrated cobalt-exchanged ZSM-5 zeolite was studied by CW-EPR techniques. It is shown that the reversible formation of a low spin carbonyl ¹{Co(CO) _n }⁷ adduct upon addition of carbon monoxide at p _CO>50–60 Torr involves significant change in the spin state of Co²⁺ from S=3/2 to 1/2. The spin Hamiltonian parameters of the adduct g _x =2.222, g _y =2.184, g _z =2.011, |A _x |=3.8 mT, |A _y |=3.2 mT, |A _z |=7.9 mT were determined by a computer simulation and further discussed in terms of the possible ground state and molecular structure. It is shown that the ¹{Co(CO) _n }⁷ cage complex exhibits a C_2v symmetry with |z ²,²A₁ ground state.     

Sodium molybdate—a possible alternate additive for sodium dichromate in the electrolytic production of sodium chlorate

Sodium dichromate is commonly used in sodium chlorate production to maintain high current efficiency; however, it is also a well documented carcinogen. To reduce the environmental impact, identification of a suitable alternative with similar buffering characteristics to dichromate and without adverse effect on the electrolytic performance of sodium chlorate production is important; sodium molybdate is a good candidate. Molybdate ion and its conjugated acid work as a buffer pair at pH 5–6, a lower and slightly narrower pH window than the typical buffer region of dichromate. Nonetheless, the molybdate buffer works effectively during the electrolytic process by maintaining pH at 5.9. Although the use of molybdate buffer will lower the overpotential of hydrogen evolution reaction (HER) by 100 mV, the average off-gas oxygen content is noticeably compromised at 3.6–4.6%, measured using a pilot cell operated at 3 kA m⁻²and 80 °C during a 3-day trial. The resulting current efficiency of 91 92% is significantly lower than when dichromate is employed as the process additive (> 96%). Mixtures of different dichromate and molybdate ratio were also investigated in terms of the resulting cathode surface potential.     

INSIGMA: an intelligent transportation system for urban mobility enhancement

Intelligent Transportation Systems (ITS) aim to improve safety, mobility and environmental performance of road transport. The INSIGMA project provides a fresh look at the possible innovations in this field, by enhancing the functionality and accuracy of ITS in urban environments. This paper describes the architecture, sensors, processing algorithms, output modules and advantages of the developed system. A comparison of existing ITS systems has been provided as background. Special attention has been given to performance and privacy issues, as the system includes social aspects such as location monitoring.     

Experiences with large-scale operational trials of ALTO-enhanced P2P filesharing in an intra-ISP scenario

Application Layer Traffic Optimization (ALTO) has recently gained attention in the research and standardisation community as a way for a network operator to guide the peer selection process of distributed applications by providing network layer topology information. In particular P2P applications are expected to gain from ALTO, due to the many connections peers form among each other, often without taking network layer topology information into account. In this paper, we present results of an extensive intra-ISP trial with an ALTO-enhanced P2P filesharing software. In summary, our results show that—depending on the concrete setting and on the distribution of upload capacity in the network—ALTO enables an ISP to save operational costs significantly while not degrading application layer performance noticeably. In addition, based on our experience we are able to give advice to operators on how to save costs with ALTO while not sacrificing application layer performance at all.     

An analytical model for manufacturing service supply contracts

The practice of service-based manufacturing, utilized in various industries, particularly in electronics, pharmaceuticals, and automotive, is on the rise as it improves enterprise effectiveness in dynamic markets. The mutual responsibilities between the supplier(s) and user(s) of such services are spelled out in defined-time-horizon contracts. While such contracts define mutual obligations of both parties on a tactical/operational level, the long-term strategic objectives of the parties may be in conflict. This paper is focused on studying the dynamics of manufacturing service contracts. It investigates the factors affecting the shape of the negotiation space for such contracts and also the way the space should be navigated in response to changing market conditions. The paper presents an analytical framework developed to facilitate behavior analysis of the actors involved in the contract.     

A bio-inspired predictive sensory-motor coordination scheme for robot reaching and preshaping

This paper presents a sensory-motor coordination scheme for a robot hand-arm-head system that provides the robot with the capability to reach an object while pre-shaping the fingers to the required grasp configuration and while predicting the tactile image that will be perceived after grasping. A model for sensory-motor coordination derived from studies in humans inspired the development of this scheme. A peculiar feature of this model is the prediction of the tactile image. The implementation of the proposed scheme is based on a neuro-fuzzy module that, after a learning phase, starting from visual data, calculates the position and orientation of the hand for reaching, selects the best-suited hand configuration, and predicts the tactile feedback. The implementation of the scheme on a humanoid robot allowed experimental validation of its effectiveness in robotics and provided perspectives on applications of sensory predictions in robot motor control.     

Ion-bombardment modification of surface morphology of solids

Ion bombardment modification of surface geometrical structure, i.e. surface roughness alteration (Part 1) and changes in surface shape (this paper) are considered. Two surface shape alteration methods, masked and maskless pattern etching, are described. They have been applied to modify various kinds of targets, including metals (99.9% aluminium and 99.9% titanium), metal alloys (stainless steel of 1H18N9T and SS 316 LC), alumina ceramic (96% Al₂O₃) and Teflon. The results of experiments, where narrow beam glow discharge (GD) and broad beam Kaufman type guns have been used as ion sources, are presented. Approximation of a real surface shape profile by a so-called mean line, which is very helpful in the case of ion patterned but extremely rough surfaces, is also discussed. Finally, the practical aspects of ion bombardment modification of surface shape phenomenon, i.e. its application to sputtering yield and sputtering velocity measurements, are shown.     

Topography of ion-etched Corning 7059 glass

Topographs of Corning 7059 glass, developed by 7Kv, 70A Ar⁺ irradiation from a hollow anode ion gun were investigated. Two forms of surface topography were observed: lens-shaped cavities and waves. These are discussed in terms of measured sputtering yield against incidence angle relation or beam divergence. Practical applications in specimen preparation for transmission electron microscopy and glass homogeneity testing are suggested.