Evaluation of ethanol fermentation parameters for bioethanol production from sugar beet pulp and juice

The aim of this study was to investigate the efficient utilization of sugar beet pulp, as well as raw, concentrated raw and thick sugar beet juice, for bioethanol production. Different fermentation conditions were examined. The influence of raw material pre‐treatment (pasteurization or sterilization), type of batch culture process (stationary or shaken) as well as the type of Saccharomyces cerevisiae yeast preparation on the yields of the process were studied. Moreover, the fermentation process effectiveness was examined in connection with the quality of the obtained distillates. Sterilization, stationary batch culture and Safdistil C‐70 yeast preparation were identified as the most profitable factors for sugar beet pulp fermentation, providing a high fermentation efficiency and ethanol yield (87.7% of theoretical ethanol yield). Concentrated raw beet juice resulted in a value of 94.2% of theoretical yield, and thick juice a 92.6% yield. The results suggest that bioethanol production from sugar beet pulp and sugar beet juice has promise as an alternative fuel. The raw spirits obtained from the sugar beet juice were characterized as having the lowest quantity of volatile by‐products. Copyright © 2014 The Institute of Brewing & Distilling     

Stiffness alterations of single cells induced by UV in the presence of nanoTiO2

Nanocrystalline titanium dioxide (nanoTiO2) has been reported to generate reactive oxygen species (ROS) under UV illumination. In our studies, changes in mechanical properties of human skin fibroblasts, exposed to the oxidative stress induced in the presence of nanoTiO2 and UV light, were studied using atomic force microscopy (AFM). The exposure of cells to the action of ROS was performed at low TiO2 concentration (4 microg/mL) and under illumination with low-intensity UVA (8 and 20 mW/cm2) or UVC (0.1 mW/ cm2). AFM measurements of the cell stiffness were carried out immediately after exposure of cells to the oxidative stress. The data suggest that under illumination with low-intensity UVA nanoTiO2 generates ROS, which, in turn, damage cellular and subcellular structures. This process was detected by AFM as a marked drop in the cellular stiffness of ca. 30-75%, which occurred rapidly, in the time frame of 1 min. The photo-oxidative stress inducing the decrease of cell stiffness was cancelled in the presence of a well-established antioxidant, beta-carotene. The results highlight the sensitivity of AFM to detect early changes in mechanical properties of cells exposed to oxidative stress.     

Fatty acid composition of egg yolk phospholipid fractions following feed supplementation of Lohmann Brown hens with humic-fat preparations

The effect of feed supplementation with humic-fat preparations on the fatty acid composition of egg yolk phospholipid fractions was studied. The Lohmann Brown was the experimental hen strain and two feeding mixtures were applied – the standard feed and the mixture supplemented with humic-fat preparations. The fatty acid profile of yolk lipids was significantly affected (P = .05) by the supplementation of feed and total increase of n-3 polyunsaturated fatty acids (PUFA) was established. A different distribution of n-3 PUFA in egg yolk lipid fractions was observed: α-linolenic acid (18:3) was found in the triacylglycerol fraction, whereas docosahexaenoic acid (22:6) was detected in the phospholipid fractions. Supplementation of the hen’s diet with humic-fat preparations resulted in the production of n-3 enriched eggs with decreased n-6/n-3 ratio in all phospholipid fractions in comparison to the eggs from the control group.     

Scaling up microbial fuel cells

The goal of this study was to quantify the relation between the surface area of the current-limiting electrode of a microbial fuel cell (MFC) and the power density generated by the MFC. Shewanella oneidensis (MR-1) was grown anaerobically in the anodic compartment of an MFC utilizing lactate as the electron donor. Graphite plate electrodes of various sizes were used as anodes. Commercially available air electrodes, composed of manganese-based catalyzed carbon bonded to a current-collecting screen made of platinum mesh, were used as cathodes, and dissolved oxygen was used as the cathodic reactant. The surface area of the cathode was always significantly larger than that of the anode, to ensure that the anode was the current-limiting electrode. The power density generated by the MFC decreased as the surface area of the anode increased, which fits well with the trend we detected comparing various published results. Thus, our findings bring into question the assertion that the overall power density generated by an MFC with large electrodes can be estimated by extrapolating from an electrode with a small surface area. Our results indicate that the maximum power density generated by an MFC is not directly proportional to the surface area of the anode, but is instead proportional to the logarithm of the surface area of the anode.     

Polymer track membranes as a trap support for reagent in fiber optic sensors

The article presents a new idea of the application of polymer track membranes (PTM) for immobilization of a reagent in fiber optic chemical sensors. PTM was made of a poly(ethylene terephthalate) foil (10 μm in thickness, pores of 0.2 μm in diameter). The usefulness of membranes additionally covered by poly(vinyl chloride) was tested in a fiber optic redox titrator. The titrator utilized N,N′-diphenylbenzidine as a reagent which changes its absorbance in dependence on the redox potential. The measuring system is based on a lightemitting diode and a silicon photodiode connected to a bifurcated fiber optic bundle. The gain is in price and availability of the membrane. © 1996 John Wiley & Sons, Inc.     

Galanin Receptors (GalR1, GalR2, and GalR3) Expression in Colorectal Cancer Tissue and Correlations to the Overall Survival and Poor Prognosis of CRC Patients

Colorectal cancer (CRC) is the second most common cause of cancer in women and the third in men. The postoperative pathomorphological evaluation of patients with CRC is extremely important for future therapeutic decisions. Although our previous studies demonstrated high galanin (GAL) presence within tumor tissue and an elevated concentration of GAL in the serum of CRC patients, to date, there is a lack of data regarding GAL receptor (GalR) protein expression in CRC cells. Therefore, the aim of this study was to evaluate the presence of all three types of GalRs (GalR1, GalR2 and GalR3) within epithelial cells of the human colon and CRC tissue with the use of the immunohistochemical method and to correlate the results with the clinical-pathological data. We found stronger immunoreactivity of GalR1 and GalR3 in CRC cells compared to epithelial cells of the unchanged mucosa of the large intestine. No differences in the GalR2 protein immunoreactivity between the studied tissues were noted. We also found that the increased immunoexpression of the GalR3 in CRC tissue correlated with the better prognosis and longer survival (p < 0.0079) of CRC patients (n = 55). The obtained results suggest that GalR3 may play the role of a prognostic factor for CRC patients. Based on data from the TCGA-COAD project deposited in the GDC Data Portal, we also found that GalR mRNA in cancer samples and the adjacent normal tissue did not correlate with immunoexpression of the GalR proteins in CRC cells and epithelial cells of the unchanged mucosa.     

可信计算的产业趋势和研究

可信计算实验研究已经进行了30多年,特别是在航空、航天、金融、证券、交通等安全关键领域取得了令人瞩目的成就.为了从数量和质量两方面综述可信计算的发展和进一步推动可信计算的研究,文中分析了可信计算的产业趋势,包括:(1)差错源的变化;(2)复杂性的迅速增加;(3)计算设备总量的增加.针对每一种趋势,指出了那些可以应用于终端产品或实验性产品以及生产这些产品过程的研究技术.文中的研究给出一个框架,既能反映可信计算过去的研究情况,也指明了今后的研究需求.     

Heterogenicity within the LPS Structure in Relation to the Chosen Genomic and Physiological Features of the Plant Pathogen Pectobacterium parmentieri

Pectobacterium parmentieri is a pectinolytic plant pathogenic bacterium causing high economic losses of cultivated plants. The highly devastating potential of this phytopathogen results from the efficient production of plant cell wall-degrading enzymes, i.e., pectinases, cellulases and proteases, in addition to the impact of accessory virulence factors such as motility, siderophores, biofilm and lipopolysaccharide (LPS). LPS belongs to pathogen-associated molecular patterns (PAMPs) and plays an important role in plant colonization and interaction with the defense systems of the host. Therefore, we decided to investigate the heterogeneity of O-polysaccharides (OPS) of LPS of different strains of P. parmentieri, in search of an association between the selected genomic and phenotypic features of the strains that share an identical structure of the OPS molecule. In the current study, OPS were isolated from the LPS of two P. parmentieri strains obtained either in Finland in the 1980s (SCC3193) or in Poland in 2013 (IFB5432). The purified polysaccharides were analyzed by utilizing 1D and 2D NMR spectroscopy (¹H, DQF-COSY, TOCSY, ROESY, HSQC, HSQC-TOCSY and HMBC) in addition to chemical methods. Sugar and methylation analyses of native polysaccharides, absolute configuration assignment of constituent monosaccharides and NMR spectroscopy data revealed that these two P. parmentieri strains isolated in different countries possess the same structure of OPS with a very rare residue of 5,7-diamino-3,5,7,9-tetradeoxy-l-glycero-l-manno-non-2-ulosonic acid (pseudaminic acid) substituted in the position C-8: →3)-β-d-Galf-(1→3)-α-d-Galp-(1→8)-β-Pse4Ac5Ac7Ac-(2→6)-α-d-Glcp-(1→6)-β-d-Glcp-(1→. The previous study indicated that three other P. parmentieri strains, namely IFB5427, IFB5408 and IFB5443, exhibit a different OPS molecule than SCC3193 and IFB5432. The conducted biodiversity-oriented assays revealed that the P. parmentieri IFB5427 and IFB5408 strains possessing the same OPS structure yielded the highest genome-wide similarity, according to average nucleotide identity analyses, in addition to the greatest ability to macerate chicory tissue among the studied P. parmentieri strains. The current research demonstrated a novel OPS structure, characteristic of at least two P. parmentieri strains (SCC3193 and IFB5432), and discussed the observed heterogenicity in the OPS of P. parmentieri in a broad genomic and phenotype-related context.     

Properties of elastomers crosslinked by bisglycidyl ether of 2,2-bis(p-hydroxyphenyl)-1,1,1-trichloroethane

Chlorobisphenolic epoxy resins in crystalline form, e.g., bisglycidyl ether of 2,2-bis(p-hydroxyphenyl)-1,1,1-trichloroethane (BGECBP) and the system sulfur–N-cyclohexyl-2-benzothiazolesulfonamide were used as crosslinking agents for vulcanization of butadiene–styrene and butadiene–acrylonitrile rubber. The density of crosslinking was determined by the equilibrium swelling method and on the basis of the Mooney-Rivlin equation which gives the relation between stress and elongation. The dynamic properties, namely, G′ and G″ and mechanical loss factor δ, were determined. On the basis of these results, mechanisms for the crosslinking reaction were advanced, the activation energy was determined, and comparisons between crosslinking rates by different systems were made. It was found that vulcanizates crosslinked by BGECBP possess higher heat aging resistance and lower glass transition temperatures in comparison with those crosslinked by means of sulfur in the presence of N-cyclohexyl-2-benzothiazolesulfonamide.     

Comparison of nitrogen bases generated via HCl precipitation and ion exchange chromatography

Nitrogen base fractions were prepared from a heavy coal-derived liquid via two commonly accepted laboratory procedures and partially characterized. Significant differences in the composition of the two fractions suggest strongly that extreme caution should be exercised in interpreting and comparing the results of base characterization studies in which different base isolation procedures are used.