Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Effective participation of wind turbines in frequency control of a two-area power system using coot optimization

In this paper, load frequency control is performed for a two-area power system incorporating a high penetration of renewable energy sources. A droop controller for a type 3 wind turbine is used to extract the stored kinetic energy from the rotating masses during sudden load disturbances. An auxiliary storage controller is applied to achieve effective frequency response. The coot optimization algorithm (COA) is applied to allocate the optimum parameters of the fractional-order proportional integral derivative (FOPID), droop and auxiliary storage controllers. The fitness function is represented by the summation of integral square deviations in tie line power, and Areas 1 and 2 frequency errors. The robustness of the COA is proven by comparing the results with benchmarked optimizers including: atomic orbital search, honey badger algorithm, water cycle algorithm and particle swarm optimization. Performance assessment is confirmed in the following four scenarios: (i) optimization while including PID controllers; (ii) optimization while including FOPID controllers; (iii) validation of COA results under various load disturbances; and (iv) validation of the proposed controllers under varying weather conditions.     

The Acute Antiallodynic Effect of Tolperisone in Rat Neuropathic Pain and Evaluation of Its Mechanism of Action

Current treatment approaches to manage neuropathic pain have a slow onset and their use is largely hampered by side-effects, thus there is a significant need for finding new medications. Tolperisone, a centrally acting muscle relaxant with a favorable side effect profile, has been reported to affect ion channels, which are targets for current first-line medications in neuropathic pain. Our aim was to explore its antinociceptive potency in rats developing neuropathic pain evoked by partial sciatic nerve ligation and the mechanisms involved. Acute oral tolperisone restores both the decreased paw pressure threshold and the elevated glutamate level in cerebrospinal fluid in neuropathic rats. These effects were comparable to those of pregabalin, a first-line medication in neuropathy. Tolperisone also inhibits release of glutamate from rat brain synaptosomes primarily by blockade of voltage-dependent sodium channels, although inhibition of calcium channels may also be involved at higher concentrations. However, pregabalin fails to affect glutamate release under our present conditions, indicating a different mechanism of action. These results lay the foundation of the avenue for repurposing tolperisone as an analgesic drug to relieve neuropathic pain.     

Synthesis and reactions of 2-(p-chloroanilino)-5- (D-galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole

Oxidative cyclization of D -galactose (p-chlorophenyl)thiosemicarbazone gave 2-(p-chloroanilino)-5-( D -galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole ( 1 ), whose acetylation afforded 2-[N-acetyl-N-(p-chlorophenyl)]-amino-5-( D -galacto-1,2,3,4,5-pentacetoxypentyl)- 1,3,4-thiadiazole ( 3 ). Its periodate oxidation of the glycol groups gave 2-(p-chloroanilino)-1,3,4-thiadiazole-5-carboxaldehyde ( 4 ), which can be transformed into 1,2-[2-(p-chloroanilino)-1,3,4-thiadiazol-5-yl]-1-hydroxy-2-oxoethane. A number of hydrazones of the formyl thiadiazole was prepared and its reduction with sodium borohydride gave 2-(p-chloroanilino)-5-hydroxymethyl-1,3,4-thiadiazole ( 6 ), whose acetylation gave a mono-O-acetyl derivative ( 7 ). Oxidation of the formyl thiadiazole gave 2-(p-chloroanilino)-1,3,4-thiadiazole ( 9 ). The spectral data of the compounds were discussed.     

Field-Assisted Ion Exchange in Type III Silica

Field-assisted ion exchange of protons in type III silica for Cs or Nu ions from a molten salt was investigated. Although electrolysis occurred, infrared measurements showed no change in hydroxyl content after ion exchange for extended periods. Scanning electron microprobe studies of cesium-exchanged specimens revealed a high-cesium-content layer =2,μm thick; this layer is believed to result from surface reaction with the molten salt.     

Transient Receptor Potential Channels and Itch

Transient Receptor Potential (TRP) channels are multifunctional sensory molecules that are abundant in the skin and are involved in the sensory pathways of itch, pain, and inflammation. In this review article, we explore the complex physiology of different TRP channels, their role in modulating itch sensation, and their contributions to the pathophysiology of acute and chronic itch conditions. We also cover small molecule and topical TRP channel agents that are emerging as potential anti-pruritic treatments; some of which have shown great promise, with a few treatments advancing into clinical trials—namely, TRPV1, TRPV3, TRPA1, and TRPM8 targets. Lastly, we touch on possible ethnic differences in TRP channel genetic polymorphisms and how this may affect treatment response to TRP channel targets. Further controlled studies on the safety and efficacy of these emerging treatments is needed before clinical use.     

Fatty Acids in Heterocyclic Synthesis Part XII: Synthesis of Surfactants from Pyrazole, Isoxazole, Pyrimidine and Triazine, Incorporating the 1,3,4-Thiadiazole Moiety Having Dyeing and Antimicrobial Activities

The titled compounds were prepared from 2-amino-5-heptadecyl[1,3,4]thiadiazole (1). Diazotization of (1) produced (2) which was coupled with active methylene compounds and gave azo ⇌ hydrazono derivatives (3A, 3B) _a–d . It was found that there is regio-specificity for addition of different nucleophiles to these tautomers; thus, nitrogen nucleophiles such as hydrazine hydrate, hydroxylamine hydrochloride and thiourea were reacted via Azo tautomer (3A) to yield pyrazole, isoxazole and pyrimidine respectively (5-7), while carbon nucleophiles as phenylisocyanate was reacted via the hydrazono tautomer (3B) and produced triazine derivatives (4). Additionally, the diazonium chloride (2) was coupled with alkaline 2-naphthol and produced 2-(5-heptadecyl-[1,3,4]thiadiazol-2-yl)-1,2-dihydro-3-oxa-1,2-diaza-cyclopenta[a]naphthalene (8). UV–visible spectra of the synthesized colored compounds (2-8) showed λ _max at 374–398 nm, while screening these compounds in vitro against micro-organisms (including structure-activity relationship SAR study) revealed high antibacterial and moderate antifungal activities. Propoxylation of compounds 1, 3, 5, 6, 7 and 8 with 3, 5, 7 mol of propylene oxide produced nonionic surfactants I(a–c)–IX(a–c) having surface active properties so, it is clear that the tested surfactants can be used in the manufacture of dyes, drugs, cosmetics, emulsifiers, pesticides, luminphores for optical applications and many other industries with low toxicity to human beings and the environment owing to their high solubility and good biodegradability.     

Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles

This study investigates the effects of calcium carbonate (CaCO(3)) nanoparticles on the mechanical and thermal properties and surface morphology of polycaprolactone (PCL)/chitosan nanocomposites. The nanocomposites of PCL/chitosan/CaCO(3) were prepared using a melt blending technique. Transmission electron microscopy (TEM) results indicate the average size of nanoparticles to be approximately 62 nm. Tensile measurement results show an increase in the tensile modulus with CaCO(3) nanoparticle loading. Tensile strength and elongation at break show gradual improvement with the addition of up to 1 wt% of nano-sized CaCO(3). Decreasing performance of these properties is observed for loading of more than 1 wt% of nano-sized CaCO(3). The thermal stability was best enhanced at 1 wt% of CaCO(3) nanoparticle loading. The fractured surface morphology of the PCL/chitosan blend becomes more stretched and homogeneous in PCL/chitosan/CaCO(3) nanocomposite. TEM micrograph displays good dispersion of CaCO(3) at lower nanoparticle loading within the matrix.     

Synthesis,Surface-Active Properties,and Emulsification Efficiency of Trimeric-Type Nonionic Surfactants Derived From Tris(2-aminoethyl)amine

Trimeric-type nonionic surfactants based on tris(2-aminoethyl)amine were prepared. N-alkyl chloride (namely, octanoyl chloride, n-decanoyl chloride, n-dodecanoyl chloride) was reacted with tris(2-aminoethyl)amine in the presence of toluene and triethylamine. The products were partially reduced and then ethoxylated by poly(ethylene glycol) of molecular weights 400, 1,000, and 2,000 g mol⁻¹. The structures were confirmed by infrared (IR) and ¹HNMR spectroscopy. The molecular weights of the surfactants were measured by gel permeation chromatography (GPC). The properties of the prepared compounds were investigated by the surface tension, interfacial tension, and cloud point. The emulsification power of the prepared surfactants for oil-in-water emulsions was also studied and the emulsion stability was monitored by an optical microscope and the bottle testing method. Some factors affecting the emulsion stability were investigated