Thin film graphene oxide membrane: Challenges and gas separation potential

Graphene oxide membranes were prepared by vacuum and pressurized ultrafiltration methods on the 12% modified Polyacrylonitrile (12mPAN) substrate to specify challenges, salient features, future directions, and potential of GO membrane for separation fields using characterization techniques and gas separation test (studied gases are CO₂, He and N2), which is an efficient tool for better understanding of GO membrane behavior. GO membrane structure was examined over a wide range of parameters, such as pore size range of substrate and its surface properties, pH of GO dispersion, GO content, synthesis pressure, operating pressure and temperature. The results show that the GO content does not hold a linear relationship with the permeance and selectivity. Film thickness, aggregates, synthesis pressure defects and interlayer spacing have significant effects on the gas separation performance of GO membranes which originate from the synthesis method and its conditions.     

Beta casein-micelle as a nano vehicle for solubility enhancement of curcumin; food industry application

Curcumin is a potent anticancer and antioxidant natural polyphenol poorly soluble in aqueous solutions. Beta-casein (B-CN), an amphiphilic self-assembling protein that can form micellar nanostructures, could be used as a carrier system for hydrophobic therapeutic agents such as curcumin. In this study, camel B-CN was used for curcumin encapsulation. Critical micelle concentration of camel B-CN was determined at 25, 30 and 37 °C using pyrene fluorescence and the solubility of curcumin was evaluated according to the solvent-evaporation technique. Presence of camel B-CN increased the solubility of curcumin at least 2500 fold. Analysis of fluorescence emission of curcumin showed that hydrophobic interactions are predominant in its formulation with B-CN. Additionally, the cytotoxicity of curcumin to human leukemia cell line K-562 was enhanced in the presence of B-CN micelles giving inhibitory concentration (IC₅₀) values of 26.5 and 17.7 μmol/L for free and encapsulated curcumin, respectively. Antioxidant activity of curcumin encapsulated in B-CN was higher than that of both free B-CN and curcumin.     

Study on sterol fraction of commercial brands of milk,yoghurt and butter sold in Iranian market and chemometric data analysis

A gas chromatographic procedure for analysis of sterols was developed to detect possible addition of vegetable oils to milk, yoghurt and butter samples. The method involved fat extraction, saponification, hexane extraction, silylation of sterols and then analysis by gas chromatography. The sterol content of 102 samples of milk, yoghurt and butter was determined. Phytosterol content higher than 5% of total sterol was observed in four samples of milk and yoghurt. Principal component analysis showed that there was a direct relationship between the level of phytosterols and fat percentage in yoghurt samples. The described method is accurate and reliable enough to be employed regularly in food quality laboratories.     

Determination of asphaltene precipitation using a CPA equation of state

Asphaltene precipitation during natural depletion and miscible gas injection is a common problem in oilfields throughout the world. Therefore, predicting asphaltene phase behavior through thermodynamic modeling may help to control its precipitation and reduce the associated problems. In this work, a new modified CPA equation of state (EoS) was used to model asphaltene precipitation. This equation is based on a combination of a new physical part and the Wertheim association term.

The results of the new model were compared with the experimental data of five oil samples. The results showed that this modified CPA EoS can predict asphaltene precipitation with good accuracy.     

Humanization of an antibody against human protein C and calcium- dependence involving framework residues

A murine monoclonal antibody to the zymogen form of human protein C that blocks protein C activation by thrombin-thrombomodulin both in vitro and in vivo has been humanized using the consensus and resurfacing methods. While the binding of the parent murine antibody to protein C is calcium-dependent (1.5-2-fold decrease in binding without calcium), the humanized antibody exhibited a significant increase in its calcium-dependence (5-fold decrease in binding without calcium). Two exposed human framework residues in the variable light domain of the humanized antibody, aspartic acid L1 and glutamine L3, are responsible for the increase in calcium-dependence.      

Co–Sn–Cu oxides/graphene nanocomposites as green catalysts for preparing 1,8‐dioxo‐octahydroxanthenes and apoptosis‐inducing agents in MCF‐7 human breast cancer cells

In this work, Co–Sn–Cu oxides/graphene nanocomposite, 30–40 ± 0.5 nm in size, was synthesized by solid‐state microwave irradiation. This method presents several advantages such as operational simplicity, fast, low cost, safe and energy efficient, and suitability for production of high purity of nanoparticles. Other advantages of this method are there is no need for the use of solvent, fuel, and surfactant. Co–Sn–Cu oxides/graphene nanocomposites have been characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy‐dispersive X–ray spectroscopy, and UV–Vis spectroscopy. The synthesized nanocomposites were used as novel highly efficient catalysts for the synthesis of 1,8‐dioxo‐octahydroxanthenes at room temperature. The catalysts are recoverable and can be reused for six runs without loss of their activity. Also, the obtained nanocomposites exhibited significant anticancer activity against breast cancer cells and they could induce apoptosis in cancer cells.     

Thermochemical preparation of W–25%Cu nanocomposite powder through a CVT mechanism

In order to produce a W–25%Cu nanocomposite powder manufactured by a thermochemical procedure a novel pair of precursors were used. Cu₂WO₄(OH)₂ and CuWO₄·2H₂O precipitates were first produced by reacting the copper nitrate and sodium tungstate aqueous solutions under certain pH and temperature. The precipitates were then dried and calcined in order to prepare CuWO_4 − x, CuO, and WO₃ oxide powders for the next step reduction. The reduction was carried out under a H₂ atmosphere to form the final W–Cu metal nanocomposite powder. Characteristics of the final powder such as distribution, uniformity and size were then discussed based thoroughly on the dominant mechanism of reduction; Chemical Vapor Transport. It was found that the average particle size of the reduced powder is 35 nm for W and 54 nm for Cu.     

Optimal signal-adaptive maximum likelihood filter for enhancement of defects in eddy current C-scan images

True estimation of the boundary and size of defects are major problems in eddy current (EC) non-destructive evaluation of conductive materials. EC image processing techniques can be used for better estimation of defect details. Because of non-stationary nature of EC C-scan images and same intensities of noise and defect histograms, the linear techniques do not produce good results. In this paper a non-linear signal-adaptive filter based on maximum likelihood (SAML) criterion is designed and successfully used for defect detection. The model of EC noise in this filter is assumed to be non-zero mean complex Gaussian process. The desired model of SAML (MSAML) filter is also modified to further reduce the probability of error and enhance defect details and boundary realization. Simulated and experimental results demonstrate the successful performance of the SAML and MASML filters in estimation of defect details and noise removal.     

The physico-chemical characteristics of extruded snacks enriched with tomato lycopene

Adding tomato derivatives to traditional starchy extruded snacks can improve their nutritional properties by adding lycopene and fibre; however the physico-chemical properties of these products must also be considered. Ingredients and extrusion parameters, including temperature, alter these properties, but their effect on lycopene content is not known. In this study, crisp low density extruded snacks were manufactured from corn, wheat and rice, with or without dried tomato skin or paste powder extruded at temperatures of 140, 160 or 180 °C. Lycopene content and the physico-chemical properties (expansion, density, hardness, colour parameters and percentage of moisture loss) of the extruded products were measured. Lycopene retention was higher in products containing tomato skin powder and significantly lower when wheat flour was used to make the snacks. Increases in the processing temperature improved the physico-chemical characteristics of the snacks but had no significant effect on lycopene retention (P > 0.05).