Determination of biogenic amines in sucuk

The biogenic amines content of sucuk (Turkish dry fermented sausage) were determined on 30 samples obtained from retail markets and butchers in Turkey. Also, pH and a_w values, microbiological properties, and NPN levels of these samples were analyzed. The most important biogenic amines were tyramine (range 2.4–676 mg/kg), followed by putrescine varied from not detected to 364 mg/kg. Histamine content was under 50 mg/kg in 80% of the samples while it was over 100 mg/kg in only one sample. Tryptamine was detected in 16 of 30 samples in the range of 1.2–82.3 mg/kg.

Lactic acid bacteria, Micrococcus/Staphylococcus and Enterobacteriaceae counts of samples varied from 2.84 to 8.85 log cfu/g, <2.00 to 6.74 log cfu/g, and <2.00 to 5.04 log cfu/g, respectively. pH values were varied between 4.53 and 6.29 while water activity (a_w) were measured to be between 0.761 and 0.960. NPN values were determined to be between 1.47% and 4.10%. Generally, total amine content was high in samples that had high NPN levels.     

Experimental and numerical investigation of heat and mass transfer during drying of Hayward kiwi fruits (Actinidia Deliciosa Planch)

In this paper we undertake an experimental and numerical study on heat and mass transfer analysis during drying of kiwi fruits. In the experimental part, the effects of various drying conditions in terms of air velocity, temperature and relative humidity on drying characteristics of kiwi fruits are investigated. In the numerical part, the external flow and temperature fields are studied using a commercial CFD package. From these fields, the local distributions of the surface convective heat transfer coefficients for the fruits are determined to predict the local convective mass transfer coefficients through the analogy between the thermal and concentration boundary layers (known as the Chilton–Colburn analogy). In addition, the time-dependent temperature and moisture distributions for different cases are obtained using the code developed to investigate heat and mass transfer aspects inside the fruits. Numerical results are then compared with experimental data and a considerably high agreement is obtained.     

Uncertainty in risk of highway bridges assessed for integrated seismic and flood hazards

Probabilistic risk assessment for bridges under natural hazards is of great interest to engineers for the development of risk mitigation strategies and implementation plans. The present study evaluates risk of an existing highway bridge in California, USA, under the integrated impact of regional seismic and flood hazards. A sensitivity study combining tornado diagram and first-order second moment reliability analyses is conducted to screen significant uncertain parameters to which bridge response is mostly sensitive. A rigorous uncertainty analysis, employing random sampling and Monte Carlo simulation techniques, is performed to obtain variations in fragility and risk curves of the bridge. Observed variations in risk curves at various risk levels are quantified through 90% confidence intervals and coefficients of variation (COV) of risk. It is observed that uncertainty in the estimated risk increases due to the presence of flood hazard at the bridge site, although mean risk does not vary with flood hazard level. Research outcome signifies that the variation in risk due to parameter uncertainty and varied flood hazard level should not be ignored to ensure bridge safety under the stated multi-hazard condition.     

风景园林设计项目的经济绩效评估 德克萨斯州案例研究的经验与教训

通过研究德克萨斯州5个项目/案例的经济绩效成果,评估了风景园林与经济活动之间的关系。5个项目/案例分别为:克莱德沃伦公园(Klyde Warren Park)、凯蒂步道(Katy Trail)、德州大学达拉斯分校校园特色景观概念性规划(UT Dallas Campus Identity and Landscape Framework Plan)、阿狄森公园(Addison Circle)和布法罗河湾散步道(Buffalo Bayou Promenade)。研究采用了定量和定性相结合的实证调查法,首先评价了风景园林设计及相关设计领域的经济评估和绩效研究情况。之后重点研究了所选项目的景观类型、过程和结果,以突出在经济绩效研究中,确定统一标准和全面框架的重要性。最后,讨论了通过实证证据和系统性调查对经济活动进行研究的价值,并将经济活动作为景观绩效的一部分。总之,综合标准、方法与案例研究的结果来说明不同城市风景园林设计类型项目的经济影响,还讨论了通过统一标准方法来获得可靠实证结果的价值。结果表明,从案例中可以看到,经济绩效并不总是容易被量化的,同样也并非所有的设计改进均与经济活动直接相关。因此,这项研究强调了记录指定的景观项目中所有直接、间接和连锁的经济效应,并突出其经济价值的重要性。这也表明,未来的风景园林设计将对社会产生更大的经济影响和价值。     

Synthesis,characterization, and thermal degradation kinetics of the copolymer poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate)

A copolymer of 4‐methoxybenzyl methacrylate and isobornyl methacrylate was synthesized by atom transfer radical polymerization. The structure of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) was confirmed by means of Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR techniques. The molecular weight distribution values of the copolymer were determined with gel permeation chromatography. The number‐average molecular weight and polydispersity index values of poly(4‐methoxybenzyl methacrylate‐co‐isobornyl methacrylate) were found to be 12,500 and 1.5, respectively. The kinetics of the thermal degradation of the copolymer was investigated with thermogravimetric analysis at different heating rates. The activation energy values obtained with the Kissinger, Flynn–Wall–Ozawa, and Tang methods were determined to be 166.38, 167.54, and 167.47 kJ/mol, respectively. Different integral and differential methods were used, and the results were compared with these values. Doyle approximation was also used for comparing the experimental results to master plots. An analysis of the experimental results suggested that the reaction mechanism was an R₁ deceleration type in the conversion range studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

3-D micro-ceramic components from hydrothermally processed carbon nanotube–boehmite powders by electrophoretic deposition

Boehmite/multi-wall carbon nanotube (MWCNT) composite powders were prepared by hydrothermal processing. Starting chemical of aluminum acetate powders (2Al(OH)(C₂H₃O₂)₂) and MWCNTs were mixed for the formation of stoichiometric boehmite powders in an attempt to synthesize MWCNT-reinforced boehmite nano-powders via hydrothermal synthesis at 200 °C for 2 h. Kinetically stable suspensions of MWCNT–boehmite composite powders were prepared and subsequently electrophoretic deposition (EPD) was applied to obtain complex shape products in the form of micro-gears. It is shown that the EPD technique is a powerful tool to manufacture small components in a short time. Detail TEM observations also indicated that hydrothermal processing provides an ideal environment to obtain homogeneous mixtures of MWCNT–boehmite powders due to effective surface functionalization of MWCNTs under hydrothermal conditions.     

Synthesis and characterization of polyphenols derived from 4-fluorobenzaldeyde: The effect of electron-donating group on some physical properties

In this study, we proposed to investigate how the effect of electron-donating methyl ( CH₃) group at p-position of amin ( NH₂) group in aminophenol (AP) compound affected thermal stability, optical, electrochemical properties, and conductivity measurement. For this reason, we choice 2-AP and 2-amino-4-methylphenol compounds and synthesized phenolic monomers by condensation reactions 4-fluorobenzaldehyde with aromatic amino phenols. Then, these monomers were converted to their polyphenol derivatives by oxidative polycondensation reactions in an aqueous alkaline medium. Structural characterizations were carried out by FTIR, NMR, and size exclusion chromatography. Cyclic voltammetry was used to determine the electrochemical oxidation-reduction characteristics. Optical properties were investigated by UV–vis and fluorescence analyses. Solid state electrical conductivities were measured on polymer films by four-point probe technique using an electrometer. Thermal data of monomer/polymer and polymers were obtained by TG-DTA and DSC techniques, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Investigation of microhardness and thermo-electrical properties in the Sn–Cu hypereutectic alloy

Sn–3 wt% Cu hypereutectic alloy was directionally solidified upward with different growth rates (2.24–133.33 μm/s) at a constant temperature gradient (4.24 K/mm) and with different temperature gradients (4.24–8.09 K/mm) at a constant growth rate (7.64 μm/s) in the Bridgman-type growth apparatus. The measurements of microhardness of directionally solidified samples were obtained by using a microhardness test device. The dependence of microhardness HV on the growth rate (V) and temperature gradient (G) were analyzed. According to these results, it has been found that with the increasing the values of V and G the value of HV increases. Variations of electrical resistivity (ρ) and electrical conductivity (σ) for casting samples with the temperature in the range of 300–500 K were also measured by using a standard dc four-point probe technique. The variation of Lorenz coefficient with the temperature for Sn–3 wt% Cu hypereutectic alloy was determined by using the measured values of electrical and thermal conductivities. The enthalpy of fusion for same alloy was determined by means of differential scanning calorimeter from heating trace during the transformation from eutectic liquid to eutectic solid.