Effects of Cooling Rate and Component on the Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y(wt%) alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing(SDAS) of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates(Rc) from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0:45:45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction(Vf) of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.     

CO2激光治疗皮肤基底细胞癌14例临床观察

目的 :探求一种简单 ,安全 ,效果好的基底细胞癌的治疗方法。方法 :对 1 4例基底细胞癌患者在局麻下用CO2 激光行基底细胞癌切除术或切除 +气化术。结果 :患者术中、术后出血少 ,伤口恢复快 ,愈合良好 ,疤痕表浅 ,随访未见复发。结论 :CO2 激光用于治疗基底细胞癌效果良好 ,无明显副作用 ,操作简单值得推广。     

地震属性解释技术的研究及确定性分析

随着油气勘探开发的不断发展，储层预测、属性分析等技术得到了广泛的应用，在生产中取得了较好的效果。但地震属性的概念，分类方法，地震属性之间、地震属性与储层参数之间的相互关系仍较模糊，各种地震属性解释方法虽然种类繁多，但缺乏系统的研究，这使得地震属性在应用中存在较大的不确定性。文章通过系统研究地震属性的概念、储层地震响应的基本特征，提出了地震响应的核心是反映地震波在介质传播过程中的能量变化，所有能引起地震能量发生变化的介质的不均质性均可导致地震属性的变化，由此提出了一种新的地震属性分类方法，并认为大部分地震属性只是基本属性在不同域中的不同表现形式。在分析现有地震解释技术的基础上，提出了对地震属性解释的新认识，强调了地震属性对地层岩性油气藏勘探的重要性，对属性间的关系及地震属性解释技术的确定性进行了研究，提出了岩性油气藏地震解释的工作流程及对地震资料采集和处理的要求。     

低温脂肪酶产生菌的筛选、鉴定及其部分酶学性质

从南极乔治王岛冻土来源的76株低温细菌中筛选到13株低温脂肪酶产生菌，对其中的BTsl0022菌株进行鉴定。通过生理生化特征、16s rDNA基因序列的同源性和系统发育分析发现，菌株RTsl0022属于假单胞菌属(Pseudomonas)，但与已定名的假单胞菌有一定的差异，与未定名的Pseudomonas sp．PsB的亲缘关系最接近，故将其暂定名为Pseudomonas sp．BTsl0022。对该菌脂肪酶的酶学性质初步研究表明，酶的最适作用温度为24℃，对热敏感，60℃处理30min仅残留25％酶活性，酶的适宜作用pH范围在7．0～9．0，最适pH为8．0。     

分析型全蒸发器在啤酒挥发性成分测定中的应用

综述了分型全蒸发器技术在啤酒发酵过程中的应用状况，并介绍了分析型全蒸发器模型结构及与之配合使用的连续多分支管。     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

Single-longitudinal-mode fiber ring laser employing an equivalent phase-shifted fiber Bragg grating

A novel single-longitudinal-mode (SLM) fiber ring laser that incorporates an equivalent phase-shifted fiber Bragg grating acting as an ultra-narrow bandpass filter in the laser cavity is proposed. The equivalent phase-shifted fiber Bragg grating has an ultra-narrow transmission bandwidth which ensures an SLM lasing. Stable SLM operation without mode hopping is demonstrated.     

An experimental study of carrier heating on channel noise in deep-submicrometer NMOSFETs via body bias

In this paper, RF noise in 0.18-mum NMOSFETs concerning the contribution of carrier heating and hot carrier effect is characterized and analyzed in detail via a novel approach that modulates the channel carrier heating and number of hot carriers using body bias. We confirm qualitatively a negligible role of hot carrier effect on the channel noise in deep-submicrometer MOSFETs. For a device under reverse body bias (V_b), even though the increase in hot carrier population is clearly characterized by dc measurements, the device high-frequency noise is found to be irrelevant to the increase in the channel hot carriers. Experimental results show that the high-frequency noise is slightly reduced with the increase in |V_b|, and can be qualitatively explained by secondary effects such as the suppression of nonequilibrium channel noise and substrate induced noise. The reduction of NF_min and R_n with the increase in |V_b| may provide a possible methodology to finely adjust the device high-frequency noise performance for circuit design