Power management in networked devices

Networks are one of the most significant developments in computing and a hallmark of modern society. However, along with increasing efficiency and productivity, both at home and in the workplace, networks have costs. One cost is the additional energy that electronic devices consume when attached to networks. Power management, a standard feature of modern PCs, was primarily developed to increase battery lifetime in laptop PCs, which historically were not network-connected when using battery power. Today, however, many laptops are connected to a network - typically a Wi-Fi network - as are the majority of desktop computers. Three key drivers of energy use are induced consumption by devices prevented by network connections from entering low-power states, increasing link data rates that inherently consume more energy for the network interfaces, and proliferation of network-connected displays that actively update and display data when no one is present.     

Evaluating software reuse alternatives: a model and its application to an industrial case study

We propose a model that enables software developers to systematically evaluate and compare all possible alternative reuse scenarios. The model supports the clear identification of the basic operations involved and associates a cost component with each basic operation in a focused and precise way. The model is a practical tool that assists developers to weigh and evaluate different reuse scenarios, based on accumulated organizational data, and then to decide which option to select in a given situation. The model is currently being used at six different companies for cost-benefit analysis of alternative reuse scenarios; we give a case study that illustrates how it has been used in practice.     

Evaluation of passive microwave snow water equivalent algorithms in the depth hoar-dominated snowpack of the Kuparuk River Watershed, Alaska, USA

This research investigates the utility of passive microwave remote sensing instruments to accurately determine snow water equivalent (SWE) over large spatial extents. Three existing Special Sensor Microwave Imager (SSM/I) snow water equivalent algorithms produced by Chang, Tait and Goodison were evaluated for their ability to determine snow water equivalent in a snowpack containing substantial depth hoar, large faceted snow crystals. The Kuparuk River Watershed (8140 km²) test site on the North Slope of Alaska was chosen for its snowpack containing a think depth hoar layer and long history of ground truth data. A new regional snow water equivalent algorithm was developed to determine if it could produce better results than the existing algorithms in an area known to contain significant depth hoar. The four algorithms were tested to see how well they could determine snow water equivalent: (1) on a per pixel basis, (2) across swath-averaged spatial bands of approximately 850 km², and (3) on a watershed scale. The algorithms were evaluated to see if they captured the annual spatial distribution in snow water equivalent over the watershed. Results show that the algorithms developed by Chang and from this research are generally within 3 cm of the spatially averaged snow water equivalents over the entire watershed. The algorithms produced by Chang, Tait, and in this research were able to predict the basin-wide ground measured snow water equivalent value within a percent error range from −32.4% to 24.4% in the years with a typical snowpack. None of the algorithms produce accurate results on a pixel-by-pixel scale, with errors ranging from −26% to 308%.     

Radiation consequences of seawater contamination during floating storage of reactor-compartment units from salvaged nuclear-powered submarines

The storage time before salvaging of decommissioned nuclear-powered submarines and the floating storage time of reactor units from salvaged submarines can total decades. During this time, radioactive contamination of seawater occurs as a result of the corrosion of the pressure hull in the region of the reactor system and rupturing of the pressure hull - as a result of corrosion of the components of the reactor system. A computational analysis shows that under standard storage conditions the specific activity of water is 10⁵–10⁶ times lower than the intervention level. In the case when the hull and the reactor system are destroyed even with remaining fuel, the specific activity of the sea water near the point of sinking also does not exceed the intervention level because of the slow emission of fission products and transuranium nuclides.Translated from Atomnaya Énergiya, Vol. 97, No. 3, pp. 210–218, September, 2004.     

Reliability of the Coolant Flow Rate Measuring System at the Ignalina Nuclear Power Plant

Age assessment and control of the reliability of the coolant flow-rate measurement system of the RBMK-1500 reactor at the Ignalina nuclear power plant are examined. A statistical analysis is made of the data obtained from measurements of the techanical characteristics of SHADR-32M flow meters. A mathematical model of the aging of flow meters and reliability estimates is constructed. A strategy is developed for replacing SHADR; this strategy makes it possible to support the required relaibility of the entire coolant flow-rate measurement system.     

Mg AZ80/SiC composite bars fabricated by infiltration of porous ceramic preforms

Semi-industrial samples of Mg AZ80/SiC/50p composites (machined bars with o.d.=80 mm and length=150 mm, having a maximum 2 vol pct of retained porosity) were successfully fabricated by pressureless, low-pressure (under overpressure of about 0.3 MPa) and moderate-pressure (under overpressure of about 0.8 MPa) infiltration. Pressureless infiltration was completed in 24 hours under the flowing atmosphere of nitrogen, whereas the moderate and low-pressure infiltrations were performed under a static atmosphere of pressurized nitrogen for 7 and 0.5 hours, respectively. The composite samples obtained by all applied infiltration paths posessed a homogeneous microstructure and superior mechanical properties as compared to the nonreinforced matrix. Due to the improved productivity of composite fabrication in comparison with the other two infiltration paths investigated in this work, the moderate-pressure infiltration process was recognized as the most competitive.     

Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys

We have evaluated controlled decarburization as a method for probing the effect of alloying elements on ferrite growth from austenite. The technique permits the exploration of longer-time ferrite layer growth; it minimizes the effects of interface structure on ferrite growth; and it permits the isolation of the effects of temperature and alloying element concentration on ferrite/austenite interface motion. The study of the decarburization of initially homogeneous Fe-C-Ni alloys was complemented by experiments using specimens with a controlled nickel concentration gradient. Although the decarburization method yields consistent results at longer times, it is found to be less appropriate for the study of initial ferrite growth. Nucleation in the gas/solid interface region, coupled with uncertainties about the precise time of decarburization, leads to large relative errors at the earliest times. For these reasons, the method is considered a valuable complement to studies based on precipitation boundary conditions. This article is based on a presentation given in the symposium “The Effects of Alloying Elements on the Gamma to Alpha Transformation in Steels,” October 6, 2002, at the TMS Fall Meeting in Columbus, Ohio, under the auspices of the McMaster Centre for Steel Research and the TMS-ASM Phase Transformations Committee.     

The effect of CaF<Subscript>2</Subscript> on thermodynamics of CaO-CaF<Subscript>2</Subscript>-SiO<Subscript>2</Subscript>(-MgO) slags

To address the role of CaF₂ in the CaO-CaF₂-SiO₂(-MgO) slag system employed for the production of low-pressure rotor steels, the thermodynamic aspects of the slag were investigated by equilibrating it with liquid iron at 1873 K in CaO or MgO crucibles. Presaturation of slag with an oxide block piece of CaO or MgO in a Pt crucible and application of a carbon paste to the outside of an oxide crucible were designed to prevent crucible failure during the slag-metal experiments. The liquidus isotherm and phase boundary of the preceding slag system were investigated using the slag-metal equilibria. Also, the effect of CaF₂ on the sulfide capacity and the activity coefficient of Fe _t O were of particular interest in controlling the sulfur level and cleanliness of low-pressure rotor steels.     

The transient to steady-state transition during the spray-rolling process

From the geometrical standpoint, this article presents a qualitative theoretical analysis and prediction of the transient to steady-state transition during the spray-rolling process, a novel manufacturing technique for aluminum strips. The analytical results indicate that, when the deposited materials at the specific points on one roll surface overlap their counterparts on the other roll surface, spray rolling transits from the transient state to the steady state. The specific points are the limiting deposition positions of the atomized droplets on the roll surface initially.