Theophylline‐loaded pectin‐based hydrogels. I. Effect of medium pH and preparation conditions on drug release profile

In this study, a series of theophylline‐loaded calcium pectin gel films were prepared in three different Ca⁺² concentrations with three different methods for wound dressing applications. Drug release performance of the films were investigated in four different medium pH in order to mimic wound healing pH conditions. Hydrogel films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy and atomic force microscopy. Their absorbency (fluid handling), swelling behavior, dehydration rate, dispersion characteristic, dressing pH determination, water vapor permeability, oxygen permeability, surface contact angle, flexibility, Shore A hardness, mean mass per unit area and thickness were determined. The effect of the hydrogels on wound healing was evaluated with an in vitro wound healing assay. After evaluating all data, we suggested that the hydrogel film prepared with swelling method using 7% or 10% crosslinker and dried at 26 °C is more suitable for controlled drug release process. We showed that between pH 3.25 and 7.12 the form of the hydrogel did not change, and drug release was continuous. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46731.     

Pulsed ultrasound-assisted extraction of natural antioxidants from mandarin (Citrus deliciosa Tenore) leaves: Experimental and modeling study

Pulsed ultrasound-assisted extraction (PUAE) of flavonoids and polyphenols from mandarin (Citrus deliciosa Tenore) leaves was examined. The response surface methodology (RSM) via face-centered central composite design (FCCD) was used to investigate the effects of extraction time (15–75?min), output amplitude (30–70%), and pH (4–10) to optimize the extraction process. The total phenolic material (TPM) and the total flavonoid material (TFM) and also the consumed energy of horn were measured as responses. Additionally, calorimetric calculations were done to evaluate the ultrasound energy dissipated into the solution. The calculated quadratic models were highly significant (p?R²) of 0.9722, 0.9805, and 0.9983. The results of the present study suggest that 65?min, 68.72?min, 15.00 extraction time, 61%, 59%, and 30% of ultrasound amplitude and 4, 6.7, and 4 pH of solution should be considered as optimal extraction conditions to get the optimum TPM (37.845?mg-GAE/g-DL), TFM (10.709?mg-CE/g-DL), and energy consumption (6130.275 Joule) for PUAE of mandarin leaves, respectively.     

Blood glucose level prediction for diabetes based on modified fuzzy time series and particle swarm optimization

Blood glucose control is an essential goal for the patients who have Type‐1 diabetes (T1D). The prediction of the blood glucose levels for the next 30‐minute is crucial. If the predicted blood glucose level is in the critical ranges, and these predictions can be known in advance, then the patients can take the necessary cautions to prevent from it. In this article, we propose a modified fuzzy particle swarm optimization algorithm for the prediction of blood glucose levels of 30‐minute after the last measurement. We form the average and patient‐specific models to predict the blood glucose level of the patients. Both models are tested on two different datasets which contain patients with T1D. The experimental results are evaluated in terms of root mean squared error and Clarke error grid analysis metrics. The results indicate that our proposed modified algorithm is feasible to be applied to the prediction of blood glucose levels. In addition, this approach can assist patients with T1D for their blood glucose control.     

Effect of surface treatment on electrical conductivity of carbon black filled conductive polymer composites

Two different types of surface modifiers, 3‐aminopropyltriethoxysilane and formamide, were applied to carbon black (CB) particles to lower electrical resistivity of polymer composites prepared by treated CB. Two different matrices, low‐density polyethylene and nylon 6, were chosen to compound with surface modified CB. Surface energy of CB was increased by adding amine or amide functional groups during surface treatment of CB. According to electron spectroscopy for chemical analysis (ESCA), chemical modification in surface chemistry of CB was obtained with the chemicals used for the treatment due to the nitrogen atoms in their structures, which may act as dopant atom. As a result of this, electrical resistivity of composites prepared by treated CB decreased. In addition, there was not any significant change in tensile strength and tensile modulus of the composites with the surface treatment. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Correlates of the length of the relationship between main and specialist trade contractors in the construction industry

Although there is a growing literature on the factors associated with the length of interorganizational relationships, there seem to be few empirical studies related to the subject in project-based industries such as construction. In this study we looked for correlations among the length of the relationship between main and specialist trade contractors, control methods and the number of rival speciality contractors in the Turkish construction industry, drawing on the data provided by a study of 27 specialist trade contractors. Correlation analysis was used to investigate the relationship. The results demonstrate that the length of the relationship between main and speciality contractors is inversely related to the number of rival specialist trade contractors, but directly related to the flexibility of control exercised by the main contractor.     

Effect of borax additive on the dielectric response of polypyrrole

The main aim of this study is to produce added polypyrrole (PPy) borax composites with high dielectric properties for technological applications. For this purpose, PPy–borax composites with different borax concentrations varying from 10 to 50 wt% have been prepared. To reveal their structural and morphological attributes, the composites have been characterized by Fourier-transform infrared spectroscopy and scanning electron microscopy. The real and imaginary parts of complex dielectric function, the imaginary component of complex electrical modulus and ac conductivity have been investigated at room temperature as a function of frequency in the range 100 Hz–15 MHz. It has been found that addition of borax increases the dielectric constant of pure PPy. In this respect, PPy–borax composites with the highest dielectric constant at low frequency may be utilized in charge storing devices. On the other hand, the dielectric loss is also very high in low-frequency region for the composites with high borax content. Exploiting this property, the material may also be used in decoupling capacitor applications. The relaxation mechanisms of the samples have also been determined as non-Debye type. The Nyquist curves of the samples have been analysed for calculating the grain and grain boundary resistance and capacitance values. In conclusion, borax has a promising potential to be used as a cheap and effective filler for improving the dielectric properties of PPy polymer.     

Screening for and characterization of Lactococcus lactis bacteriophages with high thermal resistance

Fifty-six Lactococcus lactis phage isolates collected from different German dairies and obtained from a starter culture manufacturer were tested for their heat resistance. About 40% of these isolates resisted treatment at 80 °C for 5 min when they were heated in milk. The most resistant phage isolate, P1532, was collected from sour cream. Plaque-formation was still detectable even after heating at 97 °C for 5 min. The second heat-resistant one, P680, showed some plaque-forming ability after heating at 95 °C for 5 min. Kinetic parameters for the thermal inactivation of these two resistant phages were determined for temperatures ranging from 70 to 97 °C. The inactivation of phage P1532 in skim milk and in buffer medium were found to follow first-order kinetics and did not exhibit tailing, whereas in the inactivation curves of phage P680 tailing was observed. The D-value of P1532 at pasteurization temperature of 72 °C was calculated as 112 min.     

Characterization of MEMS piezoresistive pressure sensors using AFM

Atomic force microscope (AFM) is adapted to characterize an ultrasensitive piezoresistive pressure sensor based on microelectromechanical system (MEMS) technology. AFM is utilized in contact mode to exert force on several different micromachined diaphragm structures using a modified silicon cantilever with a particle attached to its end. The applied force is adjusted by changing the trigger voltage during each engage step of the probe-tip on the diaphragm surface. The contact force is determined from the force plots obtained for each trigger voltage in advanced force mode. Low force values in the range of 0.3–5 μN have been obtained with this method. This force induces strain on the bridge-arm of the diaphragm where the polysilicon resistor is located. The resultant change in the resistance produced due to varying force/pressure is measured using a delta mode current–voltage (I–V) measurement set-up. The contact mode AFM in conjunction with a nanovoltmeter enables the calibration of very sensitive force sensors down to 0.3 μN.