Inactivation of Bacillus spores in batch vs continuous heating systems at sterilisation temperatures

This study was performed to assess the heat resistance of spores of Bacillus species in batch and continuous heating systems under commercial sterilisation conditions. Spores of thermophilic Bacillus smithii and mesophilic Bacillus amyloliquefaciens were found to be highly heat resistant in the batch system. They were able to withstand typical sterilisation temperatures. B. amyloliquefaciens showed tailing in the batch system and, before the onset of the tailing, a higher inactivation rate than in the continuous system at low temperatures. The reason for the tailing might be the presence of spore aggregates which are disrupted in the continuous system.     

Laminar flame speed measurements of dimethyl ether in air at pressures up to 10 atm

Laminar flame speed measurements of dimethyl ether/air mixtures were made at 1, 5, and 10 atm with equivalence ratios ranging from 0.7 to 1.6. All experiments were performed in a large cylindrical constant-volume bomb with optical access. A new method for converting flame images into flame radii was used. Results reported in other studies were investigated, and some explanations on the disparities found are presented. A full uncertainty analysis was performed combining precision errors from data scatter with predicted systematic errors. Uncertainties ranging between 4.2% and 8.6% were found depending on the equivalence ratio and initial pressure. Experimental results agreed well with some other spherical flame experiments and counterflow flame measurements, but were found to be much lower than PIV-based stagnation flame results. Also, two spherical flame studies deviated significantly both in magnitude and trend. Critical radii and Peclet numbers, defined by the onset of rapid flame acceleration, were recorded for all high-pressure experiments. Markstein lengths were measured and showed a decreasing trend with increasing equivalence ratio. Three different methods were used to define the laminar flame thickness, and large disparities were found between them. In this study, the modeled temperature gradient method for the definition of flame thickness is preferred over other methods. Modeling was performed with the latest version of a C3 chemical kinetics mechanism. Good agreement is seen between the experimental results and the model at all pressures. Emphasis is placed in this paper on reporting experimental uncertainties, calculated density ratios, flame temperatures, and flame radii ranges used for data analysis, and the results resolve some discrepancies seen in the literature for dimethyl ether flame speeds.     

Inhibitory effects of selected pesticides on peroxidases purified by affinity chromatography

The objective of this study was to determine the in vitro inhibition effects of seven commonly used pesticides including 2,4-d-acid dimethylamine, fenoxaprop-p-ethyl, glyphosate isopropylamine, haloxyfop-p-methyl, cypermethrin, λ-cyhalothrin, and dichlorvos on the peroxidase purified from turnip (Brassica rapa L.) and black radish (Raphanus sativus L.) using 4-amino benzohydrazide affinity column chromatography. The purification factors for the turnip and black radish peroxidases were found to be 263.29-fold (with a yield of 12.89%) and 36.20-fold (with a yield of 6.90%), respectively. Among these compounds, λ-cyhalothrin showed the strongest inhibitory effect against turnip peroxidase (K_i: 1.23 × 10^?2 ± 0.21 × 10^?2 mM) as noncompetitive inhibition. On the other hand, cypermethrin demonstrated the highest inhibition effect against black radish peroxidase (K_i: 2.14 × 10^?2 ± 0.08 × 10^?2 mM) as competitive inhibition.     

Effects of Temperature,Time, and pH on the Stability of Anthocyanin Extracts: Prediction of Total Anthocyanin Content Using Nonlinear Models

In this study, different anthocyanin sources including grape skin, black carrot, and red cabbage were used to determine the effect of thermal treatment, different acidity levels, and time on the anthocyanin content and degradation. The total anthocyanin contents were modeled by neuro fuzzy inference system (ANFIS) and artificial neural network (ANN) models. The red cabbage anthocyanin stabilities were higher than others. The anthocyanins degraded more rapidly at higher temperatures. The anthocyanin contents of samples decreased with the increase of pH from 3 to 7. Comparison of the models showed that the ANFIS model performed better than the ANN model for the estimation of total anthocyanin content in all samples. The lowest root mean square error (0.0457) and highest R ² (0.9942) values were obtained for red cabbage and grape skin in the validation period with the ANFIS model, respectively. This study showed that both models can be utilized efficiently for the prediction of total anthocyanin content affected by temperature, time, and pH.     

Antimicrobial edible films and coatings

Increasing consumer demand for microbiologically safer foods, greater convenience, smaller packages, and longer product shelf life is forcing the industry to develop new food-processing, cooking, handling, and packaging strategies. Nonfluid ready-to-eat foods are frequently exposed to postprocess surface contamination, leading to a reduction in shelf life. The food industry has at its disposal a wide range of nonedible polypropylene- and polyethylene-based packaging materials and various biodegradable protein- and polysaccharide-based edible films that can potentially serve as packaging materials. Research on the use of edible films as packaging materials continues because of the potential for these films to enhance food quality, food safety, and product shelf life. Besides acting as a barrier against mass diffusion (moisture, gases, and volatiles), edible films can serve as carriers for a wide range of food additives, including flavoring agents, antioxidants, vitamins, and colorants. When antimicrobial agents such as benzoic acid, sorbic acid, propionic acid, lactic acid, nisin, and lysozyme have been incorporated into edible films, such films retarded surface growth of bacteria, yeasts, and molds on a wide range of products, including meats and cheeses. Various antimicrobial edible films have been developed to minimize growth of spoilage and pathogenic microorganisms, including Listeria monocytogenes, which may contaminate the surface of cooked ready-to-eat foods after processing. Here, we review the various types of protein-based (wheat gluten, collagen, corn zein, soy, casein, and whey protein), polysaccharide-based (cellulose, chitosan, alginate, starch, pectin, and dextrin), and lipid-based (waxes, acylglycerols, and fatty acids) edible films and a wide range of antimicrobial agents that have been or could potentially be incorporated into such films during manufacture to enhance the safety and shelf life of ready-to-eat foods.     

Functional Properties of Vinegar

A variety of natural vinegar products are found in civilizations around the world. A review of research on these fermented products indicates numerous reports of health benefits derived by consumption of vinegar components. Therapeutic effects of vinegar arising from consuming the inherent bioactive components including acetic acid, gallic acid, catechin, ephicatechin, chlorogenic acid, caffeic acid, p‐coumaric acid, and ferulic acid cause antioxidative, antidiabetic, antimicrobial, antitumor, antiobesity, antihypertensive, and cholesterol‐lowering responses. The aims of this article are to discuss vinegar history, production, varieties, acetic acid bacteria, and functional properties of vinegars.     

Foliar epidermal anatomy of some selected wild edible fruits of Pakistan using light microscopy and scanning electron microscopy

The present study is focused on the detailed foliar epidermal anatomy of some selected wild edible fruits (WEFs) from Pakistan using light microscopy (LM) and scanning electron microscopy (SEM). The studied species are Ficus racemosa L., Solanum nigrum L., Capparis spinosa L., Physalis divaricata D.Don, Rosa moschata Herrm. and Ribes orientale Desf. collected from various localities of Pakistan. The objective of the present study is to investigate qualitative and quantitative anatomical characters for the identification and differentiation of collected wild edible fruits. The characters studied are shape and size of epidermal cells, anticlinal wall pattern, trichome type and shape, average number of stomata, length and width of stomata and pore. The detailed microscopic investigation and variations in the characters recorded have a key role in the determination and authentication of wild edible fruits. This study possesses great potential for plant taxonomists to further evaluate the species at molecular and genetic levels.