Assessment of Highway Bridge Upgrading by Dynamic Testing and Finite-Element Model Updating

The Land Transport Authority of Singapore has a continuing program of highway bridge upgrading for refurbishing and strengthening bridges to allow for increasing vehicle traffic and increasing axle loads. One subject of this program has been a short-span bridge taking a busy main road across a coastal inlet near a major port facility. Experiment-based structural assessments of the bridge were conducted before and after upgrading works including strengthening. Each assessment exercise comprised three separate components: (1) a strain and acceleration monitoring exercise lasting approximately one month; (2) a full-scale dynamic test carried out in a single day without closing the bridge; and (3) a finite-element model updating exercise to identify structural parameters and mechanisms. This paper presents the dynamic testing and the modal analysis used to identify the vibration properties and the quantification of the effectiveness of the upgrading through the subsequent model updating. Before and after upgrade, similar sets of vibration modes were identified, resembling those of an orthotropic plate with relatively weak transverse bending stiffness. Conversion of bearings from nominal simple supports to nominal full fixity was shown via model updating to be the principal cause of natural frequency increases of up to 50%. The utility of the combined experimental and analytical process in direct identification of structural properties has been proven, and the procedure can be applied to other structures and their capacity assessments.     

多部件设备维修问题研究及遗传算法求解

合理组织设备维修，缩短设备维修时间是生产运营管理的一个重要环节。本文探讨了多部件设备维修的有效组织问题。考虑到维修工人对拆分后设备的不同部分具有不同的维修效率，提出了一种基于维修时间优化的决策方法，将其与经典指派方法进行了比较；进一步地，对这一NP-hard问题设计了遗传算法，通过数值例子讨论了其求解有效性。     

一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

烧结助剂对Si3N4/BN层状复合陶瓷结构与性能的影响

研究了MgO—Y2O3—Al2O3体系(相应的层状复合陶瓷试样记为A)、Y2O3—Al2O33体系(相应的层状复合陶瓷试样记为B)及La2O3—Y2O3—Al2O3体系(相应的层状复合陶瓷试样记为C)烧结助剂对Si3N4／BN层状复合陶瓷结构与性能的影响．研究表明：在相同的烧结工艺下，试样A、B、C的抗弯强度分别为700、630、610MPa，断裂功分别为2100、1600、3100J／m^2．试样A、B以脆性断裂为主，裂纹偏转现象不明显，而试样C的载荷-位移曲线显示了明显的“伪塑性”特征，裂纹的偏转与扩展现象明显．试样A中Si3N4晶粒大小不均且长径比较小，而试样C中长柱状Si3N4晶粒发育完善，有较大的长径比．     

X-Ray Measurement of Residual Stress in Plastic Bonded Explosives

The X-ray diffractive technology was adopted for tentative study of plastic bonded explosive. The datum of some new diffractive peaks in standard PDF cards were added. The effects of strain to interplanar distance and crystal size of the explosive were studied. The results show that grain size of plastic bonded explosive is decreasing with the increasing of the pressure, and the residual stress of the explosive is draw stress.     

辽河催化裂化澄清油中间馏分热反应研究

采用先加入絮凝剂脱灰，再经减压蒸馏切割420～500℃馏分的方法，将辽河催化裂化澄清油预处理，考察了澄清油、加入絮凝剂脱灰后的澄清油以及脱灰后再减压蒸馏所得的中间馏分这3种原料在热转化过程中中间相的转化历程，并采用偏光显微镜观察热转化产物。结果表明，澄清油预处理效果明显，所得中间馏分具有较低的H／C原子比（nH／nC）和适宜的组成分布，是生产针状焦的理想原料。热转化产物的光学组织结构属于各向异性发达的广域-流线型结构。     

An Interval Fuzzy Multiobjective Watershed Management Model for the Lake Qionghai Watershed, China

Integrated watershed management is required to ensure the reasonable use of resources and reconcile interactions among natural and human systems. In the present study, an interval fuzzy multiobjective programming (IFMOP) method was used to solve an integrated watershed management problem. Based on system analysis, an IFMOP model suitable for a lake watershed system {IFMOPLWS} was developed and applied to the Lake Qionghai watershed in China. Scenario analysis and an interactive approach were used in the solution process. In this manner, various system components were incorporated into one framework for holistic consideration and optimization. Integrality and uncertainty, as well as the multiobjective and dynamic characteristics of the watershed system, were well addressed. Using two scenarios, two planning schemes were generated. Agriculture, tourism, macroeconomics, cropland use, water supply, forest coverage, soil erosion, and water pollution were fully interpreted and compared to identify a preferable planning alternative for local agencies. This study showed that the IFMOPLWS is a powerful tool for integrated watershed management planning and can provide a solid base for sustainable watershed management.     

液化气铜片腐蚀原因及解决措施

本文就引起液化石油气（LPG）铜片腐蚀不合格的原因进行了分析，对JX－1A精脱硫剂工业应用效果进行了探讨，结果表明JX－1A精脱硫剂在解决了LPG铜片腐蚀不合格方面有很好的效果。     

基于EPP模式下的数据采集系统

介绍了一种基于并口EPP模式通讯的数据采集系统的设计方法,该系统以ADSP2 1 81、E PLD为核心器件,AD7331 1芯片为模拟信号输入输出接口,非常适合便携式数据采集系统     

Development of Boundary Structures for Complex-Shaped Buildings

Over the past few years, the field of architecture has witnessed revolutionary changes in design. The recent completions of Frank O. Gehry’s projects brought unprecedented attention to complex-shaped, nonconventional design. In following these latest trends, the author has been drawn to the issue concerning the structural systems currently being adopted in realizing these complicated designs. It is perhaps inevitable that the traditional structural systems, comprised of structural elements suitable for use in conventional linear shapes, face tremendous challenges and limitations in building such complicated designs. In this context, this research consists of proposing a new alternative by employing “boundary structures with continuously changing curvature,” which follow the complex-curved envelope surface, as well as fabricating an experimental model made of polymer composite materials with computer-aided design/computer-aided engineering/computer-aided manufacturing technologies. Consequently, the study aims at offering architects unprecedented freedom in design and a new paradigm for realizing their creative ideas.