Exact integration in the boundary element method for two-dimensional elastostatic problems

This paper derives the exact integrations for the integrals in the boundary element analysis of two-dimensional elastostatics. For facilitation, the derivation is based on the simple forms of the fundamental functions by taking constant, discontinuous linear and discontinuous quadratic elements as examples. The efficiency and accuracy of the derived exact integrations are verified against five benchmark problems; the results indicate that the derived exact integrations significantly reduces the CPU time for forming the matrices of the boundary element analysis and solving the internal displacements.     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

等规聚丙烯β晶型成核剂研究

精选了一系列有机和无机化合物为成核剂,使用砂浴法和热台法制备了一系列不同β晶含量的等规聚丙烯,发现最有效的β成核剂是溶靛素灰 IBL 和溶蒽素金黄 IGK,首次表明β成核剂具有排列紧密的稠球结构特征,且含有硫原子。     

Acoustical tomography based on the second-order Born transformperturbation approximation

Reconstruction algorithms and their numerical examples of acoustical tomography based on the second-order Born transform perturbation approximation are presented. The reconstruction algorithms in the second-order Born approximation are similar in form to those in the first-order Born approximation. Replacing the angular spectrum of the scattered wave in the first-order case by the result of applying a first-order operator to the angular spectrum of the scattered wave or applying a second-order operator to the angular spectrum of the incident wave leads to the second-order reconstruction algorithms. Also, comparisons of reconstruction algorithms of the first- and second-order Born approximations are given, and they show that the second-order Born approximation algorithms have a distinct advantage over the first-order approximations in many cases     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

Pore size control of porous silica by sol-gel process

Porous silica glass was prepared by sol-gel process from tetraethoxysilane (TEOS). The effects of solvents (water, ethanol), drying condition, heat treatment temperature on specific surface area and pore size distribution of porous silica were investigated. Gelation process accelerates with an increase of H₂O content, while retards with the increase of ethanol amount. Structure changes during heat treatment were studied by means of DTA, XRD. TEM micrographs show that the gel particles shrink after heated at 500°C, thus the average pore size decreases.     

石蜡光氯化合成氯蜡－70的研究──（Ⅲ）反应过程致色因素考察及生色机理研究

氯蜡－７０是—应用广泛、性能优良的精细化工产品，其色泽是—重要的技术指标，直接影响着产品的质量和应用。本文考察了合成反应过程导致生色的因素，指出原料中含有的少量环烷烃、芳烃、杂环有机物及少量无机杂质能影响产品的色泽，实验表明温度过高，光源波长选择不当也是致色的重要原因。研究了致色的过程，提出其生色历程是按照β－消除反应机理进行的，并做了具体描述。     

A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

鄱阳湖流域水土保持与防洪治涝

鄱阳湖流域水土流失加剧了洪涝灾害。治理水土流失能增强山丘地涵养水源的能力,削洪减沙,减少库容损失,降低河床,具有明显的防洪效益。进行流域防洪规划时,应将防治水土流失与防洪治涝结合起来,因地制宣,综合治理。     

壳聚糖醇水分离膜的研究

本文制备了一系列不同脱乙酰度壳聚糖，研究了不同脱乙酰度聚糖膜的醇水分离性能，结果表明，随着脱乙酰度的增大，分离因子升高，渗透通量减小。当脱乙酰度大于９０％时，有较高的分离因子，符合单级分离要求。同时考察了料液浓度，料液温度等条件对壳聚糖膜醇水分离性能的影响，求得水和乙醇透过壳聚糖的表观活化能分别为：△Ｅｗ＝３２．６ｋＪ／ｍｏｌ，△Ｅｅ＝５７．２ｋＪ／ｍｏｌ。