A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

MEASUREMENT OF THE SPECIFIC SURFACE AREA OF POWDERS BY THIN LAYER WICKING

The specific surface areas (A) of different clay mineral powders were measured by both the BET method and by thin layer wicking. The values of A for the BET and the wicking experiments coincided within a few percent. Thus, the simple and inexpensive thin layer wicking approach may well suffice to obtain reliable specific surface area values for most powders. From the wicking data it is also possible to obtain a rough estimate of the average particle size.     

Evidence of late palaeozoic thermalwater metallization in South Yongmei Depression

This paper discusses the seafloor thermalwater spout sedimentary activity in South Yongmei Depression according to the following evidences: the Yongmei region was in an extended tectonic environment of metaplateform and locally developed intracontinental rift aulacogen in company with the activity of rich alkali, high potassium volcanics of double-peak type. Several kinds of hydrothermal sedimentary rocks and the ore-bearing sedimentary formations of copper-polymetals, iron and manganese exist in this region with a zoning feature of the seafloor thermalwater spout sedimentation. Project supported by the Science Foundation of NECC for Returns Synopsis of the first author Wu Chengjian, associated professor, born in 1957, majoring in ore deposit and mineralgraphy.     

各种状态的液体通过核孔膜的规律

介绍了液体通过核孔膜规律方面取得的新认识，包括：（１）纯净液体通过核孔膜的规律；（２）核孔膜测定液体粘滞系数的各种方法；（３）各种物质溶液浓度的核孔膜测定；（４）液相混合物快速分离和化学分离；（５）流体中固体微粒对核孔膜的堵塞及其公式；（６）用核孔膜滤除液中各各斩规律。     

“镍”催化酰氯和有机锡试剂交叉偶联反应的研究

镍络合物催化酰氯与有机锡试剂交叉偶联合成有机酮的反应,其反应选择性强,反应彻底,转化率高,工艺简单。在有机锡过量的情况下,对不同催化剂的催化活性和包括投料比,反应温度,反应时间,反应溶剂等反应条件进行了考察。     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。     

An efficient numerical approach, for determining the dispersioncharacteristics of dual-mode elliptical-core optical fibers

Based on vectorial formulations which combine the surface integral equation method and the finite-element method, a novel numerical approach is proposed for calculating the dispersion coefficients of dual-mode elliptical-core fibers with arbitrary refractive index profiles. By differentiating the original formulations involving the propagation constant β and the guided mode fields H_x and H_y once and twice with respect to the normalized frequency V, the new formulations for {dβ/dV, dH_x/dV, dH_y/dV} and for {d²β/dV², d² H_x/dV², d²H_y/dV² } are obtained respectively. Once {β, H_x, H_y } is solved through the eigenvalue procedure which dominates the computing time, only a few matrix manipulations are required to obtain {dβ/dV, dH_x/dV, dH_y/dV} and {d²β/dV², d²H_x/dV² , d²H_y/dV²}. Some numerical examples are examined to see the influence of different refractive index distributions with dips on the dispersions of the four nondegenerate LP ₁₁ modes for elliptical-core fibers     

The effects of plasma etching induced gate oxide degradation onMOSFET's 1/f noise

The effects of the plasma etching process induced gate oxide damages on device's low frequency noise behavior are investigated on MOSFET's fabricated with different field plate perimeter to gate area ratio antennas. Abnormal 1/f noise spectrum with a shoulder centered in the frequency range of 100 and to 1 kHz was frequently observed in small geometry devices, and it is attributable to a nonuniform distribution of oxide traps induced by plasma etching process     

COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。