In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Despite the outstanding power conversion efficiency (PCE) of perovskite solar cells (PSCs) achieved over the years, unsatisfactory stability and lead toxicity remain obstacles that limit their competitiveness and large-scale practical deployment. In this study, in situ polymerizing internal encapsulation (IPIE) is developed as a holistic approach to overcome these challenges. The uniform polymer internal package layer constructed by thermally triggered cross-linkable monomers not only solidifies the ionic perovskite crystalline by strong electron-withdrawing/donating chemical sites, but also acts as a water penetration and ion migration barrier to prolong shelf life under harsh environments. The optimized MAPbI₃ and FAPbI₃ devices with IPIE treatment yield impressive efficiencies of 22.29% and 24.12%, respectively, accompanied by remarkably enhanced environmental and mechanical stabilities. In addition, toxic water-soluble lead leakage is minimized by the synergetic effect of the physical encapsulation wall and chemical chelation conferred by the IPIE. Hence, this strategy provides a feasible route for preparing efficient, stable, and eco-friendly PSCs.     

SAdaBoundNc: an adaptive subgradient online learning algorithm with logarithmic regret bounds

Neural Computing and Applications - Adaptive (sub)gradient methods have received wide applications such as the training of deep networks. The square-root regret bounds are achieved in convex...     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Metal Single-Site Molecular Complex–MXene Heteroelectrocatalysts Interspersed Graphene Nanonetwork for Efficient Dual-Task of Water Splitting and Metal–Air Batteries

Development of multifunctional electrocatalysts with high efficiency and stability is of great interest in recent energy conversion technologies. Herein, a novel heteroelectrocatalyst of molecular iron complex (Fe_MC)-carbide MXene (Mo₂TiC₂T_x) uniformly embedded in a 3D graphene-based hierarchical network (GrH) is rationally designed. The coexistence of Fe_MC and MXene with their unique interactions triggers optimum electronic properties, rich multiple active sites, and favorite free adsorption energy for excellent trifunctional catalytic activities. Meanwhile, the highly porous GrH effectively promotes a multichannel architecture for charge transfer and gas/ion diffusion to improve stability. Therefore, the Fe_MC–MXene/GrH results in superb performances towards oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The practical tests indicate that Zn/Al–air batteries derived from Fe_MC–MXene/GrH cathodic electrodes produce high power densities of 165.6 and 172.7 mW cm⁻², respectively. Impressively, the liquid-state Zn–air battery delivers excellent cycling stability of over 1100 h. In addition, the alkaline water electrolyzer induces a low cell voltage of 1.55 V at 10 mA cm⁻² and 1.86 V at 0.4 A cm⁻² in 30 wt.% KOH at 80 °C, surpassing recent reports. The achievements suggest an exciting multifunctional electrocatalyst for electrochemical energy applications.     

Graph-based fine-grained model selection for multi-source domain

Pattern Analysis and Applications - The prosperity of datasets and model architectures has led to the development of pretrained source models, which simplified the learning process in multi-domain...     

A quantized set-membership estimation-based heading control method of unmanned surface vessels under unknown-but-bounded wave-induced disturbances

This paper is concerned with the heading tracking control problem for a network-based unmanned surface vessel (USV) under wave-induced disturbances. Considering the characteristics of the wave-induced disturbances, the unknown-but-bounded (UBB) noise model is adopted. Meanwhile, signal quantization is taken into account due to the limited capacity of the communication channel. Based on these considerations, a novel set-membership based control scheme is proposed, which consists of a set-membership filter (SMF) and a set-membership controller (SMC). In the proposed control scheme, the SMF is designed for providing an ellipsoidal estimation set for the USV at each sampling step, and then the SMC uses the estimation set for producing control input for the USV in order to track the reference. Sufficient conditions are derived for the considered USV system to be asymptotically stable and satisfy the modified set-membership performance constraint. Simulation results verifies the effectiveness of the proposed control scheme.     

Adaptive prescribed time control for quadrotor formation with stochastic links failure

The formation control for multiple quadrotors subject to maintaining the formation configuration and collision avoidance in the situation of stochastic links failure is investigated in this paper. First, the distributed formation controller is designed, the position controller is developed to manage the desired formation of position, and the attitude controller is developed to control the translation and rotation movements of the quadrotor. Then, in order to avoid the collisions between multiple quadrotors and the obstacles, a potential energy function method is introduced into the quadrotor formation control combined with the nest adaptive control. Inspired by the design of event trigger controller, a communication compensation controller is designed to ensure the stability of quadrotor formation under the condition of random communication interruption and recovery. Moreover, a prescribed time function is designed, which means the convergence time of the formation system can be set in advance. The prescribed time stability of the formation control system is proved by Lyapunov theory. Finally, the simulation results verify the effectiveness and superiority of this method.     

On measuring network robustness for weighted networks

Knowledge and Information Systems - Network robustness measures how well network structure is strong and healthy when it is under attack, such as vertices joining and leaving. It has been widely...     

Research and Implementation of Parallel Artificial Fish Swarm Algorithm Based on Ternary Optical Computer

Mobile Networks and Applications - Artificial fish swarm algorithm (AFS) is used in the field of function optimization problems widely. The traditional AFS algorithm has some problems such as long...     

Service placement strategy for joint network selection and resource scheduling in edge computing

The Journal of Supercomputing - In the edge computing, service placement refers to the process of installing service platforms, databases, and configuration files corresponding to computing tasks...