锌基合金模具的应用及探讨

本文分析了锌基合金模具制造及使用过程中容易出现热裂、翘曲、收缩的问题，并提出了解决这些问题的措施。     

大型水轮发电机组励磁变压器参数及绝缘方式的选择--由三峡机组励磁系统投运引起的思考

结合三峡机组励磁系统的调试及投运经验,对大型水电机组静止自励系统选型中存在的一些关键性技术课题进行分析与论证,期望得出的结论有助于在大型水轮发电机组励磁系统参数选择和在提高机组运行安全、可靠性方面提供有益的借鉴。文中提出的励磁系统设计新理念仅代表个人的观点。     

用于生产甲基丙烯酸的杂多酸催化剂的研究

以异丁烯为原料的两段直接氧化生产甲基丙烯酸最新工艺有许多优点。其技术关键在于研制出高效的甲基丙烯醛选择性氧化催化剂。本文报道P-Mo-As-Cu杂多化合物催化剂的组成、制备条件对催化剂活性的影响。经优化后获得高选择性、高活性的二段氧化催化剂，其甲基丙烯酸收率达60％以上。     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

耿达电站首部枢纽运行中的泥沙淤积及清污处理

简要地介绍了渔子溪二级水电站首部枢纽在10多年运行管理中的泥沙淤积及清污的处理措施。     

Inter- and intra-molecular ionic interactions of polyampholyte: Carboxymethyl-2-diethylaminoethylcellulose

Carboxymethyl-2-diethylaminoethylcellulose (CM-DEAE cellulose) was prepared by etherification of carboxymethylcellulose with diethylaminoethyl chloride in a NaOH solution. The behaviour of CM-DEAE cellulose in aqueous solution was studied by viscosity and GPC measurements. The degree of substitution (DS) and existing states of DEAE substituents were examined by the use of proton NMR, and those of the CM substituents were observed with FT-IR. The results reveal that the reduced viscosity and apparent molecular size of CM-DEAE cellulose vary with the concentration of sodium chloride and changes in pH and DS. These phenomena can be explained in terms of inter- and intra-molecular ionic interactions.     

Crystallization behaviour of Ni-Co-base metallic glasses by isochronal and isothermal annealing

The crystallization behaviour of three amorphous alloys, Co₅₀Ni₂₅Si₁₅B₁₀, Ni₅₀Co₂₅Si₁₅B₁₀ and Ni₅₀Co₂₅P₁₅B₁₀, was studied by means of differential thermal analysis in conjunction with scanning transmission electron microscopy. Isochronal annealing showed a strong dependence of crystallization on scan rate over the range of 1.99 to 20.70 K min^–1. At high Co/Ni ratios, a sequential two-stage crystallization process involving primary MS-I phase followed by MS-II phase precipitation was observed. At low Co/Ni ratios MS-I and MS-II crystallization were concurrent and inseparable. Replacement of the metalloid Si with P as the glass-former dramatically reduced the activation energy for crystallization as well as the crystallization temperature. A mechanistic understanding of these findings was pursued in light of TEM/STEM microanalysis     

U(Ⅳ)-U(Ⅵ)同位素交换反应动力学研究 Ⅰ.Fe~(2+)对U(Ⅳ)-U(Ⅵ)同位素交换反应的催化作用

一、前言由于U(IV)-U(VI)同位素交换体系具有相当大的同位素效应和很好的稳定性,并且容易实现两相回流,这对于分离U同位素的工业应用都是十分有利的。但是,U(IV)-U(VI)同位素交换反应速度非常慢,常温下H~+浓度为1.0—4.0 mol/l时,速度常数为1.0×10~(-4)l~2/mol·s。因此要用U(IV)-U(VI)交换体系浓缩铀同位素,必须研究U(IV)-U(VI)交换反应动力学,找到加快交换反应的方法。     

溶剂萃取分离锂同位素研究Ⅱ.苏丹Ⅰ-中性配位体协萃体系萃取分离锂同位素效应探讨

文章讨论了苏丹I-中性配位体协萃体系萃取分离锂同位素中螯合剂和协萃剂的结构效应。为了获得高的同位素分离效应,螯合剂必须是弱酸性的(PK_α>11),具有强的分子内氢键及易于形成六元螯合环。协萃剂结构不仅要求无空间位阻,而且具有强的配位基。α随配位基的碱性增大而相应提高。萃取络合物中螯合环的增多亦有利于体系α的提高。此外本文还讨论了一些萃取体系的同位素富集方向和萃锂体系用于分离同位素的前景。