二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Inter- and intra-molecular ionic interactions of polyampholyte: Carboxymethyl-2-diethylaminoethylcellulose

Carboxymethyl-2-diethylaminoethylcellulose (CM-DEAE cellulose) was prepared by etherification of carboxymethylcellulose with diethylaminoethyl chloride in a NaOH solution. The behaviour of CM-DEAE cellulose in aqueous solution was studied by viscosity and GPC measurements. The degree of substitution (DS) and existing states of DEAE substituents were examined by the use of proton NMR, and those of the CM substituents were observed with FT-IR. The results reveal that the reduced viscosity and apparent molecular size of CM-DEAE cellulose vary with the concentration of sodium chloride and changes in pH and DS. These phenomena can be explained in terms of inter- and intra-molecular ionic interactions.     

Crystallization behaviour of Ni-Co-base metallic glasses by isochronal and isothermal annealing

The crystallization behaviour of three amorphous alloys, Co₅₀Ni₂₅Si₁₅B₁₀, Ni₅₀Co₂₅Si₁₅B₁₀ and Ni₅₀Co₂₅P₁₅B₁₀, was studied by means of differential thermal analysis in conjunction with scanning transmission electron microscopy. Isochronal annealing showed a strong dependence of crystallization on scan rate over the range of 1.99 to 20.70 K min^–1. At high Co/Ni ratios, a sequential two-stage crystallization process involving primary MS-I phase followed by MS-II phase precipitation was observed. At low Co/Ni ratios MS-I and MS-II crystallization were concurrent and inseparable. Replacement of the metalloid Si with P as the glass-former dramatically reduced the activation energy for crystallization as well as the crystallization temperature. A mechanistic understanding of these findings was pursued in light of TEM/STEM microanalysis     

AVO 异常检测技术及其应用

本文介绍了一系列简单而实用的 AVO 异常显示、检测和增强的新技术。包括:共炮检距(或相近)显示技术、振幅比值显示技术、滚动显示技术、线性转换显示技术、抛物线转换显示技术和 AVO 增强技术。文中以实例说明了上述各种方法的应用情况。     

提高延迟焦化装置苛刻度的探索

介绍了镇海炼化延迟焦化装置为提高苛刻度所采取的降低循环比、缩短生焦时间、提高加热炉出口温度等措施情况。实施降低循环比的措施后,液体产品收率增加了1.96%,焦炭收率下降了1.7%,处理量提高了4.7%。缩短生焦周期后,Ⅰ、Ⅱ套焦化装置的处理量分别提高了6.2%、7.2%。同时,炉出口温度需根据不同的原料油性质和不同的产品要求来确定。对于炉管烧焦周期,应以经济性为原则,科学权衡利弊后确定。介绍了加强除焦、行车设备维护保养所采取的一些措施。     

井下气液分离及回注技术研究现状分析

气井产水量的不断增加对天然气生产构成严重威胁，其影响越来越受到人们的关注和重视。使用井下气液分离及回注技术，可以降低举升和处理费用，增加生产寿命，提高采收率，减少环境污染，简化地面分离设备，提高投资效益。针对井下分离及回注技术研究现状进行了分析，给出了并下气液分离及回注形式、适用条件和技术设计、应用方面的结论。     

杜84断块超稠油开发中后期稳产对策研究

对杜84断块超稠油生产中后期暴露的主要矛盾，即随着轮次升高，周期吞吐效果变差，井下技术状况日益变差。油层动用不均，汽窜加剧等问题进行了分析。并提出了相应的稳产对策-实施多井整体吞吐，大修复产，调剖等措施。现场应用证明，这些措施基本能够确保杜84断块超稠油中后期的稳产。     

有扰对称信道平均信息量的计算

照相手机让诺基亚抢了风头，这真是亚洲人的失策。在日本和韩国，内置摄像头的手机早就不是什么值得炫耀的东西了。不过日本人的动作还是很快的，GD88和N8一副后来居上的架势，让人不敢小瞧。     

码头建筑物对水位影响的模型试验及计算方法

河岸码头建筑物势必导致其上游水位壅高及对码头附近水流流态产生影响。以汉江沙洋河段为对象 ,通过定床概化物理模型试验研究了码头建筑物对河道水位与流速场的影响。并基于能量平衡原理 ,采用河道恒定非均匀流水面曲线基本方程 ,结合物理模型试验资料 ,计算了码头建筑物附近的水位变化值 ,并提出了码头建筑物产生的水位壅高值的计算方法。