合成Co_2O_3—Cr_2O_3—Fe_2O_3—MnO_2系高温黑颜料最佳工艺条件的探讨

本文介绍了Co_2O_3—Cr_2O_3—Fe_2O_3—MnO_2系高温黑颜料的合成工艺,研究分析了四种氧化物的不同配比、混合及合成温度等工艺过程对颜料呈色的影响,从而确定了含钴量较低呈色纯正的Co—Cr—Fe—Mn系高温颜料的最佳工艺条件,并利用过渡金属络合物的吸收光谱理论对Co、Cr、Fe、Mn四种元素的变价离子使含Ba釉着黑色的特性作出了定性的分析.     

云母填料尺寸效应对水在环氧涂层中扩散行为的影响

以3种不同尺寸（124μm、38μm和19μm）的片状云母粉为填料，应用质量法和电化学阻抗法（EIS）研究云母填料尺寸效应对水在环氧涂层中的扩散行为的影响。结果表明在几种涂层中，水的扩散总是分为两个阶段：扩散初期阶段和平衡扩散阶段。浸泡初期水在涂层中的扩散行为除了124μm云母环氧涂层基本符合理想菲克扩散行为外，38μm云母环氧涂层和19μm云母环氧涂层均符合理想的菲克扩散定律，即涂层的吸水与浸泡时间的1／2次方成正比。但是水在几种涂层中的扩散系数却各不相同，其中38μm云母环氧涂层的扩散系数最小。     

Preparations and properties of thermosensitive terpolymers of N‐isopropylacrylamide,sodium 2‐acrylamido‐2‐methyl‐propanesuphonate,and N‐tert‐butylacrylamide

Terpolymers based on N‐isopropylacrylamide, sodium 2‐acrylamido‐2‐methyl‐propanesulfonate, and N‐tert‐butylacrylamide were synthesized by free‐radical copolymerization with 2,2′‐azobisisobutyronitrile as an initiator. The lower critical solution temperatures (LCSTs) of the linear polymer aqueous solutions were determined by the measurement of the transmittance on UV at different temperatures. The influence of the polymer concentration, polymer composition, and ionic strength on the LCSTs of the linear polymers was investigated. The LCST decreased with increases in the hydrophobic monomer N‐tert‐butylacrylamide, polymer concentration, and ionic strength. The phase transition became sharp when the polymer concentration and ionic strength increased. Meanwhile, the crosslinked hydrogels were prepared with the same recipe used for the linear terpolymers, but a crosslinker was added to the reaction system. The swelling ratios of the hydrogels at various temperatures and salt solutions were determined. The hydrogels possessed both high swelling ratios and thermosensitivity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

聚天冬氨酸的合成与表征

以L-天冬氨酸为原料,热缩合成聚天冬氨酸酐,水解得到聚天冬氨酸。采用凝胶色谱法(GPC)测定了聚天冬氨酸的分子量,并用核磁共振(NMR)对其进行了表征。     

核壳型乳液聚合研究进展

综述了近年来核/壳结构聚合物乳液的聚合工艺、性能及核/壳结构的表征方法进行,讨论了影响核/壳结构聚合物乳胶粒子形态的各种因素。     

丙交酯的合成

以DL－乳酸为原料在催化剂存在下，加热、减压脱水合成了DL－丙交酯，研究了温度、压力、反应时间等反应条件对丙交酯产率的影响，用IR等分析测试仪器对丙交酯进行了表征。     

有机玻璃的增韧研究

研究了不同聚合方法制备的聚丙烯酸丁酯（PBA）对浇铸型有机玻璃（PMMA）的增韧改性，研究结果表明，当PBA以纳米粒子簇分散在PMMA基体中时，对PMMA有较好的增韧改性效果。当PMMA中无皂乳液聚合PBA（e-PBA)的质量分数为0.5%时。改性PMMA的冲击强度比基体提高38%。SEM观察表明，本体聚合PBA（b-PBA)橡胶粒子以独特的纳米簇状结构均匀分布在PMMA基体中，大量的微裂纹以b-PBA粒子为中心呈放射状向外辐射，这些微裂纹在试样破坏的过程中吸收了大量的冲击能，使改性PMMA韧性得以提高。     

注塑模微机CAD系统

本文介绍了一个微机上运行的注塑模ＣＡＤ系统，此系统主要解决了四个难点，浇注系统设计，冷却系统分析，型腔，型芯的曲面造型设计，装配图和零件工作图的设计绘制，经厂家实际运用证明，该系统使用方便，结果正确，能提高设计效率，降低生产成本。     

Development of polarization ratio model for sea surface wind field retrieval from TerraSAR-X HH polarization data

In this article, the polarization ratio (PR) of TerraSAR-X (TS-X) vertical–vertical (VV) and horizontal–horizontal (HH) polarization data acquired over the ocean is investigated. Similar to the PR of C-band synthetic aperture radar (SAR), the PR of X-band SAR data also shows significant dependence on incidence angle. The normalized radar cross-section (NRCS) in VV polarization data is generally larger than that in HH polarization for incidence angles above 23°. Based on the analysis, two PR models proposed for C-band SAR were retuned using TS-X dual-polarization data. A new PR model, called X-PR hereafter, is proposed as well to convert the NRCS of TS-X in HH polarization to that in VV polarization. By using the developed geophysical model functions of XMOD1 and XMOD2 and the tuned PR models, the sea surface field is retrieved from the TS-X data in HH polarization. The comparisons with in situ buoy measurements show that the combination of XMOD2 and X-PR models yields a good retrieval with a root mean square error (RMSE) of 2.03 m s^–1 and scatter index (SI) of 22.4%. A further comparison with a high-resolution analysis wind model in the North Sea is also presented, which shows better agreement with RMSE of 1.76 m s^–1 and SI of 20.3%. We also find that the difference between the fitting of the X-PR model and the PR derived from TS-X dual-polarization data is close to a constant. By adding the constant to the X-PR model, the accuracy of HH polarization sea surface wind speed is further improved with the bias reduced by 0.3 m s^–1. A case acquired at the offshore wind farm in the East China Sea further demonstrates that the improvement tends to be more effective for incidence angles above 40°.     

“LOGO”在塑料机械中的应用

把可编程控制器“PLC”中“LOGO”集成块应用于塑料机械中,把可编程序输入到“LOGO”,来表达电器线路对塑料制品的记数和裁刀部分进行自动控制。