结构正则化多视图非负矩阵分解

现存非负矩阵分解（non-negative matrix factorization,NMF）研究多考虑单一视图分解数据,忽略了数据信息的全面性。此外,NMF限制其获取数据的内在几何结构。针对以上问题,提出一个结构正则化多视图非负矩阵分解算法（structure regularized multi-view nonnegative matrix factorization,SRMNMF）。首先,通过主成分分析来对数据进行全局结构的判别式学习;其次,利用流形学习来捕获数据的局部结构;然后,通过利用多视图数据的多样性和差异性来学习表征。模型提升了算法聚类的整体性能,更加有效地挖掘数据的结构信息。此外,采用高效的交替迭代算法优化目标函数得到最优的因子矩阵。在六个数据集上与现存的代表性方法比较,所提出的SRMNMF的准确率、NMI和Purity分别最大提高4.4%、6.1%和4.05%。     

A deep multi-source adaptation transfer network for cross-subject electroencephalogram emotion recognition

Neural Computing and Applications - In real-world application of affective brain–computer interface (aBCI), individual differences across subjects and non-stationary characteristics of...     

基于参数空间法的飞行器再入控制研究

针对空天飞行器再入段环境变化剧烈、气动参数变化范围大的特点,采用参数空间方法来设计其控制系统;首先建立飞行器控制系统的数学模型,鉴于飞行器再入过程中对攻角有着严格的要求,设计了以攻角反馈为被控信号的三回路自动驾驶仪结构,然后根据参数空间方法求出对应的控制器参数,最后基于Matlab/Simulink的非线性仿真表明,所设计的控制系统在大气密度偏差±30%、气动力/力矩系数各偏差±20%的组合偏差情况下仍具有较好的鲁棒稳定性和跟踪性能。     

光电火控系统指向精度CCD非接触测量方法研究

为满足某光电火控系统中二维转台指向精度的高精度测量需求,提出了一种利用CCD图像的非接触测量方法;以静态指向精度为测量对象,构建了CCD图像测量系统,系统分辨力为0.44mrad,采用视频序列的数字图像自动拼接方法得到单幅宽视场全景图,通过图像快速匹配方法得到转台的方位像素坐标值,对转台的指向精度进行了测量;测量实验结果表明:转台的指向精度为0.5mrad,满足指向精度2mrad的设计要求。     

Delay‐dependent stability for Markovian genetic regulatory networks with time‐varying delays

This paper is concerned with the problem of stochastic stability analysis for a class of genetic regulatory networks with Markovian jump parameters and time‐varying delays. A delay‐dependent stability criterion is derived by using a novel mode‐dependent Lyapunov functional. The derived stability criterion is expressed in terms of linear matrix inequalities and is less conservative than the existing ones in the literature. A numerical example is provided to demonstrate the effectiveness of the proposed stability criterion. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Growth characteristics of β-SiC by chemical vapour deposition

A twin-plane re-entrant corner effect (TPRE) in growth of chemical vapour deposited (CVD) -SiC is described by the film and particles of gas-phase homogeneous nucleation. The structural morphology has been characterized by scanning electron microscopy and transmission electron microscopy. Morphological characteristics of the deposited crystals, such as triangularity, hexagons or facets have been explained in terms of the re-entrant corner effect at twin junctions, which were proposed as preferential growth sites for perfect crystals. For real deposits, screw dislocations and/or the re-entrant corner effect are not expected to be compatible. The majority of chemical vapour deposited SiC crystals have a high defect density comprised of {111} twins and dislocations associated with the process variables. Infrared transmission spectra and electron spectroscopy of chemical analysis indicated that the major chemical bonds of CVD -SiC were Si-C and C-H bonds. The positions of the 1s or 2p corelevel peaks for deposits are described.     

Piezoelectric and acoustic properties of potassium titanyl phosphate (KTP) and its isomorphs

The bulk elastic and piezoelectric properties of potassium titanyl phosphate (KTP) and some of its family members such as RbTiOPO(4 ) (RTP) and RbTiOAsO(4) (RTA) have been determined. The piezoelectric, elastic, and dielectric matrix (P-E-D) of KTP has been completely characterized. Values for the temperature dependence of the expansion coefficients and elastic constants have been obtained, and the effects of variations in dielectric constant on coupling coefficient determined. The major diagonal elements of the piezoelectric and elastic matrices of RTP and RTA were measured as were the thermal expansion coefficient of all the KTP isomorphs, KTP in the temperature range 25-80 degrees C, is shown to have a combination of large coupling coefficients (up to k(t)=38% for hydrothermally grown KTP) and medium temperature dependence coefficients of elastic constant (as low as 40 p.p.m./ degrees C for tau(c33) for hydrothermally grown KTP) that makes it attractive for many piezoelectric applications.     

软件单元测试应用研究及案例分析

单元测试是软件测试过程的第一站,高质量的单元测试是软件质量保证的必要条件,本文就单元测试的概念、测试类型及规程作了简单的阐述,同时就单元测试进行了案例分析。     

A built-in test pattern generator

Built-in testing is currently of more concern due to the difficulties in testing a VLSI byusing an external tester.In addition,Built-In Testing is also necessary for on-line testing and afault-tolerant computing system.Using a Linear Feedback Shift Register(LFSR)as a built-intest pattern generator(BITPG)is a realistic and simple approach.An LFSR with maximumlength can generate pseudo-random test patterns or all non-null vectors for exhaustive testing.This paper presents an LFSR design with non-maximum length to serve as a BITPG to generatea given test set T,which efficiently saves testing time.A search-verification process fordesigning this kind of LFSR is employed and implemented by the program SVBITPG.Thispaper presents the diagram of tire program and gives stone examples to illustrate the design ofthe BITPG.