ADI-FDTD Method With Fourth Order Accuracy in Time

This letter presents an unconditionally stable alternating direction implicit finite-difference time-domain (ADI-FDTD) method with fourth order accuracy in time. Analytical proof of unconditional stability and detailed analysis of numerical dispersion are presented. Compared to second order ADI-FDTD and six-steps SS-FDTD, the fourth order ADI-FDTD generally achieves lower phase velocity error for sufficiently fine mesh. Using finer mesh gridding also reduces the phase velocity error floor, which dictates the accuracy limit due to spatial discretization errors when the time step size is reduced further.     

Perceived risk and trust associated with purchasing at electronic marketplaces

Understanding consumer behaviour is of vital importance to consumer-oriented e-business models today. In this paper, we study the relationships between consumer perceptions of risk and trust and the attitude towards purchasing at a consumer-to-consumer electronic marketplace (EM). Typical for EM settings is that consumer behaviour is subject to perceptions of the selling party as well as of the institutional structures of the intermediary that is operating the EM. Building upon the well-established literature of trust, we consider the concepts of intermediary trust and seller trust. We extend this categorisation by introducing the concepts of intermediary risk and seller risk. We developed measurement instruments for intermediary risk and seller risk. All measurement scales have acceptable alphas and are unidimensional. An empirical study is conducted to explore the relationships between the risk and trust types and consumer purchase attitude. The results reveal significant, direct effects of seller trust and seller risk. Second-order effects of intermediary trust and intermediary risk are investigated and reported. The paper concludes with general observations and recommendations for research and practice.     

新型超微晶软磁合金FePCCuMoSi微观结构缺陷的正电子湮没研究

用正电子湮没方法研究了新型超微晶软磁合金的微观结构缺陷，样品选用的是在不同温度下退火的Ｆｅ８１Ｐ１２Ｃ３Ｃｕ１Ｍｏ０．５Ｓｉ２．５合金，结果表明，合金的微观结构构陷大小，密度随退火温度有规律地变化，这种现象可能与非晶的晶化过程有关。     

重馏分油加氢脱氮反应动力学模型的研究

简要地介绍了一些典型的模型氮化物的ＨＤＮ反应规律。根据胜利ＶＧＯ在３７２２Ｂ催化剂上的大量ＨＤＮ实验数据，提出了如下的ＨＤＮ基本反应动力学方程：ｄＣＮｄｔ＝－ｋ１＋Ｋ＊ＣＮＣＮＰＨ２为了扩大上式的应用范围，详细分析了各种因素（如原料油种类和馏程及Ｈ２Ｓ等）对ＨＤＮ的影响，并开发了相应的经验关联式，从而得到了一个较完整的馏分油ＨＤＮ反应动力学模型。验证实验表明，该模型是成功的。     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

Complete mobile email management

Years have lapsed since the inauguration of the first Wireless Application Protocol (WAP) application. One of the main reasons for the lukewarm response so far may be attributed to the lack of a “Killer” application. Many companies and developers have attempted to replicate email services (an Internet Killer appplication) within the WAP realm, but till now, no significant success has been reported. This paper will first discuss on the key functions which are lacking in the present WAP-email service, and which are arguably necessary if a much larger user base is to be attracted to these services. A new system will be proposed which can enable the user to send files residing in a remote personal computer (PC) as attachments to his emails using WAP-enabled mobile devices. The implementation of the system will be presented in details. Issue relating to the connection to various types of email servers and the security of the system will also be addressed in the paper.