基于三维特征向量的非侵入式电热负荷细分算法

非侵入式负荷监测分解（NILMD）技术是当前居民用能服务深化提升和电力供需互动的重要数据获取手段,然而当前工程上应用广泛的事件驱动型NILMD技术一直无法准确细化分解电热负荷。针对这一问题,文中提出了一种基于三维特征向量的典型电热负荷细化分解算法。首先,基于有功、无功功率和电流谐波等电气负荷特征采用事件检测方法提取电热事件,在有功功率的基础上,引入运行时长、频繁启停次数等非电气负荷特征共同构建三维特征向量电器模型。然后,采用序贯覆盖法设计典型电热负荷细化分解命题学习规则和细化分解算法。最后,基于实证实验数据进行分解验证,发现4种典型电热负荷的细化分解准确率超过85%。实验结果表明,文中所提典型电热负荷细化分解算法有效地提高了4种典型电热负荷分解的准确率。     

低翘曲玻纤增强PET复合材料的制备和性能研究

依据降低翘曲的机理，选用不同降低翘曲的方法，制备了系列翘曲玻纤增强PET复合材料，结果表明，具有较高形状对称性的填料，如滑石粉，云母粉和玻璃微珠都能不同程度地降低玻纤增强PET体系的翘曲，非晶聚合物也能有效改进该体系的翘曲性能。     

Synthesis and Characterization of Highly Dispersed Antimony-Doped Stannic Hydroxide Nanoparticles: Effects of the Azeotropic Solvents to Remove Water on the Properties and Microstructures of the Nanoparticles

Highly dispersed antimony (Sb)-doped stannic hydroxide nanoparticles have been successfully prepared using the solution chemistry method. The properties and microstructures of the nanoparticles are investigated in detail by means of infrared, transmission electron microscope, X-ray diffractometer, and Brunauer-Emmett-Teller nitrogen surface area measurements. The results indicate that the properties and microstructures of the nanoparticles strongly depend on the azeotropic solvents used to remove water at the drying stage. Various azeotropic solvents are screened to investigate their effects on the size and dispersivity of dried Sb-doped stannic hydroxide. Three empirical rules are drawn for selecting an effective azeotropic solvent: (1) the solvent molecule should contain at least one atom such as oxygen as the hydrogen (H)-bond acceptor to form H bonds with the surface –OH (acting as an H-bond donor) of polymer particle; (2) the H-bond acceptor should locate in the middle of the alkane chain rather than on the terminal so that the alkane chain can stretch out and cover more surface area, improving the dispersivity of the dried product; and (3) the solvent should have a higher boiling point (∼140°C) to reduce the time of azeotropic distillation for removing water and maintain a lower residual amount of azeotropic agent. Based on the empirical rules, it is discovered that iso-amyl acetate is the most effective azeotropic solvent.     

碱金属和锌对高炉用SiAlON结合刚玉砖的复合侵蚀

将高炉用SiAlON结合刚玉砖制成外部尺寸为50mm×50mm,内孔尺寸为25mm×25mm的坩埚,分别加入由Na2CO3、K2CO3、ZnO和宝钢高炉现场高炉灰配制的炉渣(其w(Na2O+K2O)=2.75%,w(ZnO)=5.1%)和用K2CO3、ZnO、石墨配制的炉渣(其w(Na2O+K2O)=25%,w(ZnO)=25%),然后分别在还原气氛下于1350℃16h和1100℃40h进行侵蚀试验。将侵蚀后的试样纵向对称剖开,观察渣对试样的侵蚀和渗透情况,进行SEM和EDAX分析。结果表明:碱金属和锌含量不同的两种炉渣对SiAlON结合刚玉砖的侵蚀速度都很小;碱金属侵蚀机理主要是SiAlON与碱蒸气反应生成钾霞石,与渣反应生成铁橄榄石,并参与硅酸盐玻璃相的生成;刚玉颗粒与渣中的FeO、Na2O和K2O反应生成铁铝尖晶石和少量针状β-Al2O3;锌对该砖没有产生明显的化学侵蚀。     

An Efficient Semi-Analytical Simulation for the Heston Model

With splitting technique, a new semi-analytical scheme with predictable strong convergence order 1.0 is proposed for the transformed Heston model, where the variance process is displaced by the corresponding volatility process. The volatility process is decomposed into a linear SDE and an ODE, both of which have the analytical solution, but the SDE is simulated by the Euler method while the ODE is approximated analytically with a slight modification. Numerical tests show its high efficiency and accuracy in the simulation for the mean-reverting square root process.     

丙烯酸酯乳液的改性研究

制备了丙烯酸酯乳液,探讨了丙烯酸、N-羟甲基丙烯酰胺、二乙烯基苯、丙烯腈和三聚氰胺等不同改性剂对乳液性能的影响,在此基础上通过互穿网络聚合、化学共聚及物理共混等方法对乳液的性能进行了改性研究。     

Cr_2O_3对方镁石－尖晶石耐火材料抗渣性的影响

采用电熔镁砂及预合成电熔ＭＡ砂为原料，在高温下烧成方镁石－尖晶石试样，当加入少量铬矿时可提高其热震稳定性及抗渣性。用坩埚法作富ＣａＯ转炉渣对方镁石－尖晶石系耐火材料的侵蚀试验后，采用ＸＲＤ、ＳＥＭ、ＥＤＡＸ、岩相分析等方法分析Ｃｒ_２Ｏ_３对方镁石－尖晶石耐火材料抗渣性的影响。     

低挥发分煤在新型干法窑生产中的应用

对劣质煤、低挥发分煤的燃烧特性分析,工艺设备分析,提出预分解窑烧劣质煤、低挥发分煤的可能性、必要性,为我公司烧劣质煤、无烟煤打下了基础。     

圆盘反应器中的PET缩聚过程

利用薄膜实验研究了PET缩聚过程反应和传质规律 ,建立了链增长、链降解反应动力学模型和泡沫脱挥时的传质速率方程 ;通过冷模实验研究了圆盘反应器中PET的混合、流动、成膜、膜表面更新以及传质规律 ;综合了反应和反应器研究结果 ,建立了圆盘反应器中的PET缩聚过程模型 ,对圆盘反应器中的PET缩聚过程进行了仿真分析 ,考察了温度、压力、停留时间、转速、催化剂浓度、负荷大小等各种因素的影响     

改性凹凸棒土净化含铬废水的研究

将凹凸棒土进行改性处理，用于对含铬废水中铬离子的吸附。本文研究了改性方式、凹凸棒土用量、吸附时间、pH值对含铬废水中铬离子净化率的影响。