A Sequential Design Approach for Switching ℌ∞ LPV Control

This paper proposes a sequential design scheme for switching ℌ_∞ LPV (Linear Parameter-Varying) control, aiming to reduce the computational complexity of the associated optimization problem. Different from the traditional approach that simultaneously designs switching LPV controllers and solves a high-dimensional optimization problem, the proposed sequential design approach renders a bundle of low-dimensional optimization problems to be solved iteratively. Individual ℌ_∞ LPV controller for each subregion is synthesized by independent PLMIs (Parametric Linear Matrix Inequalities) to guarantee ℌ_∞ performance, and controller variables are interpolated on the overlapped subregions such that the ℌ_∞ performance is also guaranteed on the overlapped subregion. Numerical examples are used to demonstrate the effectiveness of this method to reduce the computational load in each design iteration and improved ℌ_∞ performance over the conventional simultaneous design method with well-tuned interpolation coefficient.

     

On the mechanical performance of closed cell Al alloy foams

The mechanical properties of three different commercially available closed cell Al alloys all made by foam casting are examined. The objective is to assess the roles of cell morphology and of imperfections in governing the basic properties: stiffness, yield strength and fracture resistance. This assessment provides goals for manufacturing strategies that enable attainment of good mechanical performance with affordable process technologies. A prevalent role of curves and wiggles in the cell walls on stiffness and strength (anticipated by models) is affirmed by the present measurements. Systematically larger stiffnesses and yield strengths found in tension than in compression are consistent with a prominent role exerted by such imperfections. Moreover, foam casting is apparently capable of cell morphologies that impart properties approaching the best achievable values for an isotropic closed cell solid, devoid of imperfections. There are associated implications for performance and affordability. Fracture measurements indicate crack growth occurring along the cell walls by a mechanism analogous to the plastic tearing of thin sheets. The crack growth resistances are in the range of 1 kJm⁻². This mechanism infers a toughness that scales with the cell wall thickness and its yield strength.     

探索中国民营企业经营模式创新之路——岷山公司推行模拟法人经营体制

中国民营企业经营现状据第一部《中国民营企业发展报告》蓝皮书统计，中国300多万家私营企业90％以上是家族企业，既有单一业主制的企业，也有合伙制的企业、共有制的企业，甚至还出现了家族成员保持临界控制权的企业集团。     

用于预焙槽炼铝的多功能地面专用操作设备

主要介绍了预焙槽炼铝另外一种操作方式的专用设备———多功能地面操作车辆 ,分别对更换阳极打壳专用车、阳极覆盖加料车、出铝叉车进行了介绍 ,并总结了这些操作设备的优点及对我国铝工业的可借鉴之处。     

TEM IMAGING TECHNIQUE

This imaging technique is used for approximate interpretation of TEM data including ungrounded loopsource and grounded line source soundings.Loop source data can be collected as central-loop soundings or asout-of-loop soundings with a short or long offset configuration.The imaging method is based on the same princi-ple as that employed by Fullager(1989),with apparent resistivities computed directly from time-derivative data,db/d,and then associated with depths according to image theory.     

激光快速成形Rene′88DT高温合金的时效强化研究

研究了时效时间对激光快速成形后时效硬化镍基高温合金Rene′88DT中沉淀相组织演化和力学性能的影响。发现随时效时间的增加，沉淀相y’略有长大，颗粒之间发生大颗粒吞噬小颗粒的粗化，时效40h后沉淀相颗粒粗化明显。对经不同时间时效后的激光快速成形Rene′88DT试样进行了硬度测试。结果显示，在时效时间为28h时，硬度有一峰值HRC49。在此基础上，采用1165℃，2h固溶、空冷＋760℃，28h时效的热处理工艺对激光快速成形标准拉伸棒样进行了热处理，拉伸结果显示成形件的抗拉强度较激光沉积态提高了400MPa，屈服强度接近同种材料的粉末锻造水平。     

Video summarization via minimum sparse reconstruction

The rapid growth of video data demands both effective and efficient video summarization methods so that users are empowered to quickly browse and comprehend a large amount of video content. In this paper, we formulate the video summarization task with a novel minimum sparse reconstruction (MSR) problem. That is, the original video sequence can be best reconstructed with as few selected keyframes as possible. Different from the recently proposed convex relaxation based sparse dictionary selection method, our proposed method utilizes the true sparse constraint L₀ norm, instead of the relaxed constraint _L2,1$L_{2,1}$ norm, such that keyframes are directly selected as a sparse dictionary that can well reconstruct all the video frames. An on-line version is further developed owing to the real-time efficiency of the proposed MSR principle. In addition, a percentage of reconstruction (POR) criterion is proposed to intuitively guide users in obtaining a summary with an appropriate length. Experimental results on two benchmark datasets with various types of videos demonstrate that the proposed methods outperform the state of the art.     

喀麦隆曼维莱水电站枢纽布置设计

介绍了曼维莱水电站枢纽布置设计及优化过程,在合同方案基础上,根据最新的补充勘测资料及多方案研究对比,对坝线选择、引水发电系统方案选择和厂区枢纽布置及优化设计工作做了详细的介绍,可供同类工程参考。     

用于腺苷检测的基于级联扩增核酸适体电化学传感界面的构建研究

该文报道了一种基于酶级联扩增的电化学核酸适体检测腺苷的新方法。当腺苷存在时,滚环扩增的引物通过E.coli DNA连接酶的作用与通过巯基组装在金电极上的固定探针连接。在pHi29 DNA聚合酶的作用下,滚环扩增反应进行并产生一条与环形探针完全互补的长的单链,然后将大量金纳米粒子标记的核酸探针与滚环扩增的产物杂交。该传感界面电化学行为的结果表明,通过酶级联扩增的方法提高了检测腺苷的阻抗响应灵敏度,且选择性和重现性良好。用于腺苷的检测时,其线性范围为2.0μmol/L~100μmol/L,最低检测浓度为2.0μmol/L,表明该传感界面的设计可作为一种通用方法而有望用于其它目标物的检测。