吹膜挤出机的电磁感应加热系统建模与有限元模拟研究

为实现吹膜挤出机在电磁感应加热条件下能效的定量分析,对吹膜挤出机电磁感应加热的三维有限元模型进行了研究,导出了对应于指定机筒和螺杆材料的电流透入深度与电磁感应加热器的各设计参数之间的关系;分析了挤出机的机筒与螺杆等关键部件在电磁感应三段式分区加热条件下的磁场分布、电流密度场分布及焦耳热能分布的相对趋势。结果表明,感应磁场主要分布在机筒内表面,而相应的感应电流主要分布在机筒外层,且当机筒上缠绕的3组匝数相同的电磁感应加热线圈中加载有大小相等、方向相同的交变电流时,电流密度和产生的焦耳热能集中在机筒和螺杆的中部,而适当增加进料段与计量段加热区所对应的两组线圈匝数可获得较为均匀的电磁感应加热效果。相对于电阻式加热,电磁感应加热的能量损耗较小,是一种环保节能的吹膜挤出机加热方式。     

Thermal properties and crystallization behavior of bamboo fiber/high‐density polyethylene composites: Nano‐TiO2 effects

In this study, bamboo fiber/high‐density polyethylene (HDPE) composites were prepared, and the effects of nano‐TiO₂ on their thermal properties and crystallization behavior were investigated via thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results show that the addition of nano‐TiO₂ improved the thermal stability and had a dual function in the crystallization behavior of the composites. On one hand, it functioned as a nucleating agent. The addition of 2 wt % nano‐TiO₂ promoted the crystallization, which caused the increase of the crystallization rate and crystallinity degree, as well as the micronization of the crystalline grain. On the other hand, intermolecular hydrogen bonds and covalent bonds were formed between nano‐TiO₂ and the polymer matrix, which hindered the crystallization of the composites. When the content of nano‐TiO₂ was continually increased, the inhibitory effect of the crystallization was gradually enhanced, which resulted in a decrease in the crystallization rate and crystallinity degree of the composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39846.     

The cytotoxicity evaluation of magnetic iron oxide nanoparticles on human aortic endothelial cells

One major obstacle for successful application of nanoparticles in medicine is its potential nanotoxicity on the environment and human health. In this study, we evaluated the cytotoxicity effect of dimercaptosuccinic acid-coated iron oxide (DMSA-Fe₂O₃) using cultured human aortic endothelial cells (HAECs). Our results showed that DMSA-Fe₂O₃ in the culture medium could be absorbed into HAECs, and dispersed in the cytoplasm. The cytotoxicity effect of DMSA-Fe₂O₃ on HAECs was dose-dependent, and the concentrations no more than 0.02 mg/ml had little toxic effect which were revealed by tetrazolium dye assay. Meanwhile, the cell injury biomarker, lactate dehydrogenase, was not significantly higher than that from control cells (without DMSA-Fe₂O₃). However, the endocrine function for endothelin-1 and prostacyclin I-2, as well as the urea transporter function, was altered even without obvious evidence of cell injury in this context. We also showed by real-time PCR analysis that DMSA-Fe₂O₃ exposure resulted in differential effects on the expressions of pro- and anti-apoptosis genes of HAECs. Meanwhile, it was noted that DMSA-Fe₂O₃ exposure could activate the expression of genes related to oxidative stress and adhesion molecules, which suggested that inflammatory response might be evoked. Moreover, we demonstrated by in vitro endothelial tube formation that even a small amount of DMSA-Fe₂O₃ (0.01 and 0.02 mg/ml) could inhibit angiogenesis by the HAECs. Altogether, these results indicate that DMSA-Fe₂O₃ have some cytotoxicity that may cause side effects on normal endothelial cells.     

Translucent Mg-α-Sialon Ceramics Prepared by Spark Plasma Sintering

The translucent Mg-α-sialon ceramics have been prepared by spark plasma sintering (SPS) α-Si₃N₄ powder with AlN and MgO as the additives at 1850°C for 5 min. The sample possesses a uniform, dense microstructure under the rapid densification of SPS process. The translucent Mg-α-sialon ceramics achieve the maximum transmittance of 66.4% for the sample of 0.5 mm in thickness in the medium infrared region, which could be attributed to the equiaxed microstructure and few glassy phase confirmed by the observation of transmission electron microscopy. The material also exhibits good mechanical properties of high hardness (21.4±0.3 GPa) and fracture toughness (6.1±0.1 MPa·m^1/2).     

4，4’-联苯二甲酸的合成研究

研究了4,4’-联苯二甲酸的合成,以联苯为原料,经过氯甲基化、氯化、水解得到了目标化合物,总收率48％,产品纯度99．2％。     

污水厂污泥中类二噁英类物质污染水平的研究进展

污水厂污泥的农业资源化利用是污泥处置的重要方法之一,但污泥中所含有毒有害的类二噁英类物质会制约污泥的农业利用.本文综述了污水厂污泥中类二口恶英类物质的污染水平和特点,为进一步制定和完善我国农用污泥中类二口恶英类物质控制标准提供科学的依据.     

Preparation of heat‐resistant gradient‐index polymer optical fiber rods based on poly(N‐isopropylmaleimide‐co‐methyl methacrylate)

Using the interfacial gel polymerization method, a heat‐resistant gradient‐index polymer optical fiber (GI POF) was developed based on the copolymer of methyl methacrylate (MMA) and N‐isopropylmaleimide (IPMI) as the matrix material and bromobenzene (BB) as dopant. The gradient distribution of IPMI in the GI POF rod was determined by element analysis. IPMI had great advantage in improving glass transition temperature (T_g) and forming a gradient‐index profile. There was a significant enhancement in the heat‐resistant property in comparison with a conventional GI POF rod. The combination of high thermal stability and easy fabrication makes the novel BB–IPMI–MMA system very suitable for heat‐resistant GI POF. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 280–283, 2003     

压力交换式能量回收器在反渗透海水淡化技术中的应用

在反渗透海水淡化系统中，高压系统中采用压力交换式能量回收器，大大地降低海水淡化的能耗。压力交换式能量回收器的能量回收效率达到95％以上，本文从其工作原理和反渗透海水淡化设计上阐述其应用的优点。     

塑料换热器在海水淡化中的应用

阐述了塑料换热器在海水淡化中应用的研究状况,分析了塑料换热器所具有的优势如成本更低、更好的防腐防垢性能,质量更轻和能耗更低等,重点讨论了塑料换热器在露点蒸发淡化技术中的应用和有利条件,并对塑料换热器在海水淡化中的应用前景作了进一步的展望。     

樟树叶片提取物抑菌作用研究

通过制备樟树叶片提取物及该提取物对霉菌与细菌的抑制作用的研究，结果表明樟树叶片（脂溶性）抑菌物比（水溶性）抑菌物的抑菌效果强，且（脂溶性）抑菌化合物对霉菌（青霉、曲霉、根霉）的抑制效果比细菌（大肠杆菌、枯草芽孢杆菌）强。