中浓度气力输送弯管压力降数值模拟研究

对于中等浓度气力输送90°弯管内的气固流动状态进行数值模拟研究,并对水平转垂直、垂直转水平,不同弯径比(R/D=1.5~6.0)的90°弯管,均匀和非均匀粉体颗粒流过弯管的压力降Δp进行了模拟计算。结果表明,在同一气体流速下,不同R/D的弯管的Δp变化显著;存在一个使Δp最小的R/D值。在模拟的条件范围内,弯管内粉体颗粒的速度分布随R/D变化。并讨论了不同R/D的粉体颗粒流动对弯管压力降及管壁磨损的影响。在同样操作条件下,对煤粉输送进行了弯管压力降数据模拟,其模拟计算结果与周建刚等人的试验结果吻合良好。     

2,6-二乙酰基吡啶合成方法的改进

优化了2，6—二乙酰基吡啶的合成工艺。以2，6—吡啶二羧酸为原料，经过醇化及克莱森酯缩合反应，合成了2，6—二乙酰基吡啶，2，6—吡啶二羧酸二乙醇和2，6—二乙酰基吡啶的分离收率分别为94．1％和88．9％，2，6—二乙酰基毗啶的质量分数大于99％。     

改善聚酯装置热媒炉运行状况的几项措施

介绍了聚酯装置的热媒炉在运行过程中多次停炉的原因和存在的问题 ,比如燃料油压力波动、燃料油温度低、含水高、控制系统联锁频繁、热效率下降等 ,通过增设燃料油罐、提高油罐温度、改造增压泵、优化VR -4控制系统以及其它措施 ,大大改善了热媒炉的运行状况     

An Attractive Synthetic Approach to Methyl Formate from Methanol via Methyl Nitrite

Catalytic synthesis of methyl formate has been investigated by a novel route starting from methyl nitrite in vapor phase. The acidic sites of the catalysts play a crucial role for the catalytic activity and the selectivity of formation of methyl formate. The H-Y zeolite catalyst gave higher yield and selectivity of the target product. This study provides a new approach for the synthesis of methyl formate from methanol via methyl nitrite.     

水溶性富勒烯衍生物的设计合成及在生物医药中的应用

介绍了水溶性富勒烯衍生物在抗艾滋病、DNA的裂解、消除自由基和抗菌等方面的应用,及一些水溶性富勒烯衍生物的设计合成。     

高速混合法在共混地膜生产中的应用

介绍了在原有吹制LDPE地膜设备上(挤出机长径比为20:1)吹制LDPE、LLDPE和HDPE共混微膜和超薄微膜,采用高速混合法的混料工艺达到了良好的预热效果,弥补了挤出机长径比小的不足。     

Data-based adaptive online prediction model for plant-wide production indices

A data-based adaptive online prediction model is proposed for plant-wide production indices based on support vector regression, a general method which we customized specifically to model very large data sets that are generated dynamically and periodically. The proposed model can update its parameters online according to the statistical properties of the training samples. Further, in order to improve the prediction precision, each sample is weighted with a dynamic penalty factor that considers the effect of each sample on the prediction model accuracy. Moreover, a customized procedure is introduced to handle large training sets. After having been convincingly evaluated on benchmark data, effectiveness and performance of our approach for plant-wide production indices is demonstrated using industrial data from an operating ore dressing plant over a range of scale in training data set size. The higher accuracy and shorter computation times than existing methods suggest that it may prove advantageous in actual application to dynamic production processes.     

P(MMA-DBMEA)乳液聚合研究

甲基丙烯酸甲酯 ( MMA)在无皂乳化剂条件下 ,加入少量的功能性单体 N,N一二甲基 ,N-丁基 ,N-甲基丙烯酰氧乙基溴化铵 ( DBMEA) ,合成了稳定的 P( MMA-DBMEA)共聚物乳液 .该共聚物乳胶粒呈现单分散分布。同时用 NMR研究了共聚物 ,并对 P( MMA-DBMEA)聚合物13 C进行了全归属。     

利用氯碱厂废弃盐泥制备NO3-吸附剂

将氯碱厂废弃盐泥与丙烯酸、钛酸四正丁酯等共聚，过硫酸钾作引发剂，制得TNO3^-吸附剂，同时还得到了有利用价值的二氧化硅和碳酸钙。用正交试验法与单纯形优化法相结合，确定了废弃盐泥制备NO3^-吸附剂的优良配方及合适的工艺。增添了水净化剂的新品种，探索了氯碱工业废弃盐泥利用的新途径。     

Swelling of pH‐sensitive chitosan–poly(vinyl alcohol) hydrogels

The swelling properties of different chitosan–poly(vinyl alcohol) (PVA) hydrogels were investigated as functions of the medium pH and salt concentration. The maximum swelling ability of the hydrogels was at a buffer pH of approximately 3, regardless of the PVA content in the hydrogels. The maximum mass of the swollen hydrogels was about 13 times that of their contracted counterparts. The cyclical swelling and contraction between pH 3 and pH 7 buffers and pH 3 and pH 3 buffers with salt confirmed the Donnan swelling mechanism of these hydrogels. The swelling mechanism was considered the transfer of water molecules driven by a concentration gradient. This was represented by a simplified mass‐balance model, which neglected the effect of the ionization reaction, for the initial swelling period. The effective mass‐transfer coefficient of water molecules during swelling, estimated with this model, gradually decreased with increasing PVA content in the hydrogels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4665–4671, 2006