MOCVD Growth of Erbium Monoantimonide Thin Filmand Nanocomposites for Thermoelectrics

We report the growth of erbium monoantimonide (ErSb) thin films on indium antimonide (100) substrates by low-pressure metalorganic chemical vapor deposition. The growth rate of ErSb thin films shows strong dependency on the growth temperature and the Sb/Er precursor molar flow rate ratio. Scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffractometry (XRD) were employed to study the ErSb thin films grown under the growth conditions that gave the maximum growth rate in the range we investigated. We also report the growth of two types of nanocomposites in which ErSb nanocolumns or nanoslabs with lengths ~500 nm and diameters 20 nm to 30 nm are embedded in Zn-doped InGaSb (ErSb/InGaSb:Zn) and ErSb nanoparticles with diameters of ~30 nm are embedded in Zn-doped InSbAs (ErSb/InSbAs:Zn). These nanocomposites were intended to increase phonon scattering in a mid-to-long phonon wavelength range to reduce lattice thermal conductivity. We used time-domain thermoreflectance to measure total thermal conductivity for the two types of nanocomposites, obtaining 4.0 ± 0.6 W/mK and 6.7 ± 0.8 W/mK for the ErSb/InAsSb:Zn and ErSb/InGaSb:Zn nanocomposites, respectively, which suggests that the thermal conductivity was close to or slightly smaller than the alloy limit of the two ternary alloy hosts. The two nanocomposites were further studied by transmission electron microscopy (TEM) to reveal their microscopic features and by XRD to assess their crystalline structures.     

Gaussian orthogonal matrix transform approach for PAPR reduction of optical OFDM signals

Optical orthogonal frequency division multiplexing (O-OFDM) has been widely adopted as a high-speed data transmission technique in visible light communication systems. This technique usually suffers from high peak-to-average-power ratio (PAPR). In this paper, a new PAPR reduction technique is proposed for O-OFDM signals. At the transmitter, a matrix transformation with the Gaussian elements is applied to the time-domain O-OFDM signal and at the receiver, the inverse matrix is used to recover the original signal. We show that the Gaussian orthogonal matrices can reconstruct the original signals without degrading the bit error rate (BER) performance. Gram-Schmidt technique is used to orthogonalize the Gaussian matrices. Computer simulations are conducted for 16-QAM baseband modulated symbols and about 3 dB PAPR reduction gain is achieved by the proposed approach compared with conventional O-OFDM.     

Task scheduling mechanisms in cloud computing: A systematic review

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review (SLR) has not been presented to discover and evaluate the task scheduling approaches in the cloud computing environment. To overcome, this paper presents an SLR‐based analysis on the task scheduling approaches that classify into (a) single cloud environments that evaluate cost‐aware, energy‐aware, multi‐objective, and QoS‐aware approaches in task scheduling; (b) multicloud environment that evaluates cost‐aware, multi‐objective, and QoS‐aware task scheduling; and (c) mobile cloud environment that is energy‐aware and QoS‐aware task scheduling. The analytical discussions are provided to show the advantages and limitations of the existing approaches.     

A wrapper‐based feature selection for improving performance of intrusion detection systems

Along with expansion in using of Internet and computer networks, the privacy, integrity, and access to digital resources have been faced with permanent risks. Due to the unpredictable behavior of network, the nonlinear nature of intrusion attempts, and the vast number of features in the problem environment, intrusion detection system (IDS) is regarded as the main problem in the security of computer networks. A feature selection technique helps to reduce complexity in terms of both the executive load and the storage by selecting the optimal subset of features. The purpose of this study is to identify important and key features in building an IDS. To improve the performance of IDS, this paper proposes an IDS that its features are optimally selected using a new hybrid method based on fruit fly algorithm (FFA) and ant lion optimizer (ALO) algorithm. The simulation results on the dataset KDD Cup99, NSL‐KDD, and UNSW‐NB15 have shown that the FFA–ALO has an acceptable performance according to the evaluation criteria such as accuracy and sensitivity than previous approaches.     

Design of efficient power amplifier for low power transmitters

This paper presents a fully integrated, low transmit-power and high-efficiency 2.4 GHz class-E power amplifier (PA) in TSMC 0.18 μm CMOS process for low-power transmitters such as wireless sensor networks (WSN). In this paper, a new output load has been proposed. Also, analytical design equations have been included to design an efficient low power circuit. This PA, employs the pad capacitance and bond-wire inductance of the output node, for satisfying class-E zero-voltage switching (ZVS) condition and matching the antenna’s 50 Ω resistance. By using bond-wire inductance instead of inductor in the output filter, smaller chip size and higher efficiency has been achieved compared to other works for low transmit-power applications. Also, the effectiveness of bulk-drive technique on faster switching and increasing efficiency have been evaluated. It has been proved that this technique leads to increase the efficiency of switching PAs. This PA delivers a range of output power from 2.7 to 7.2 dBm with a supply voltage range from 500 to 850 mV while achieving overall power efficiency range of 57.3–60.7%.     

Structure–Thermodynamic‐Property Relationships in Cyanovinyl‐Based Microporous Polymer Networks for the Future Design of Advanced Carbon Capture Materials

Nitrogen‐rich solid absorbents, which have been immensely tested for carbon dioxide capture, seem until this date to be without decisive molecular engineering or design rules. Here, a family of cyanovinylene‐based microporous polymers synthesized under metal‐catalyzed conditions is reported as a promising candidate for advanced carbon capture materials. These networks reveal that isosteric heats of CO₂ adsorption are directly proportional to the amount of their functional group. Motivated by this finding, polymers produced under base‐catalyzed conditions with tailored quantities of cyanovinyl content confirm the systematical tuning of their sorption enthalpies to reach 40 kJ mol^?1. This value is among the highest reported to date in carbonaceous networks undergoing physisorption. A six‐point‐plot reveals that the structure–thermodynamic‐property relationship is linearly proportional and can thus be perfectly fitted to tailor‐made values prior to experimental measurements. Dynamic simulations show a bowl‐shaped region within which CO₂ is able to sit and interact with its conjugated surrounding, while theoretical calculations confirm the increase of binding sites with the increase of Ph? C?C(CN)? Ph functionality in a network. This concept presents a distinct method for the future design of carbon dioxide capturing materials.     

Comparison among emission and susceptibility reduction techniques for electromagnetic interference in digital integrated circuits

This paper presents a comparative study of susceptibility reduction techniques for electromagnetic interference (EMI) in digital integrated circuits (ICs). Both direct power injection (DPI) and very-fast transmission-line pulsing (VF-TLP) methods are used to inject interference into the substrate of a single test chip. This IC is built around six functionally identical cores, differing only by their EMI protection strategies (RC protection, isolated substrate, meshed power supply network) which were initially designed for low emission design rules. The ranking of three of these cores in terms of electromagnetic immunity is then compared with the one of their radiated emission, thanks to near-field scanning (NFS) measurements. This leads to the establishing of design guidelines for low EMI in digital ICs.     

Home Automation Using Augmented Reality (HAAR)

Wireless Personal Communications - The development of Smart Home Controllers has seen rapid growth in recent years, especially for smart devices, that can utilize the Internet of Things (IoT)....     

On the Growth of Thin-Film AlGaN/GaN Epitaxial Heterostructures on Hybrid Substrates Containing Layers of Silicon Carbide and Porous Silicon

Semiconductors - Abstract—In our work, we carry out a structural-spectroscopic study of AlGaN/GaN epitaxial layers grown by molecular-beam epitaxy with nitrogen-plasma activation on a hybrid...